can someone meausre their stock or a/m header? - Toyota Yaris Forums

thebarber · 12-14-2008, 07:53 PM

wondering if this dc sports header i bought for an xb/xa will fit on my yaris....

need some measurements from an oem yaris header or aftermarket yaris header...

im getting about 8.25" from the front of the flange that would connect to the block to the midpipe flange (see pic below). and about 6.5" from the center of the runners to the center of the exhaust/midpipe pipe (see pic below). and the midpipe flange seems to +/- line up w/ the 2nd runner on the block flange....

also, just take a look at the pics i have to see if your oem/aftermarket header is similar in angle....

post pics of your yaris header if you can, please

cali yaris · 12-14-2008, 07:56 PM

doesn't look right to me -- I have a stock header I can measure tomorrow morning @ work.

PHXDEMON · 12-14-2008, 09:19 PM

This has already been covered. It will bolt to the engine fine but it won't meet up with the midpipe iirc.

ddongbap · 12-14-2008, 10:41 PM

whats IIRC mean? I always ask, I always get an answer, but I always forget.

taKuto · 12-14-2008, 11:12 PM

'if i recall correctly'
i'm still pissed off at the guy you bought it from, i wasted so much time trying to organize to pick it up from him since he was discussing shipping with me and then tells me he's selling to someone else.

ztrack157 · 12-14-2008, 11:58 PM

Sell it of scion life and put it towards one that fits. I measured my stock header for you and no numbers add up to what you get with the DC you have.

cleong · 12-15-2008, 03:08 AM

If you're prepared to hack off one or more of your catalytic converters and weld in a section of replacement pipe angled to suit the DC, you could make it fit.

But there's no turning back for this one though.

cali yaris · 12-15-2008, 04:36 PM

thebarber,

your 6.5" vertical is about 5" on the stock header, and your 8.25" front to back is about 11" on the stock header.

The angle at the end is completely different.

thebarber · 12-15-2008, 06:13 PM

Quote:

Originally Posted by cali yaris

thebarber,

your 6.5" vertical is about 5" on the stock header, and your 8.25" front to back is about 11" on the stock header.

The angle at the end is completely different.

thanks garm, appreciate it

12-14-2008, 07:53 PM	#1
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	can someone meausre their stock or a/m header? wondering if this dc sports header i bought for an xb/xa will fit on my yaris.... need some measurements from an oem yaris header or aftermarket yaris header... im getting about 8.25" from the front of the flange that would connect to the block to the midpipe flange (see pic below). and about 6.5" from the center of the runners to the center of the exhaust/midpipe pipe (see pic below). and the midpipe flange seems to +/- line up w/ the 2nd runner on the block flange.... also, just take a look at the pics i have to see if your oem/aftermarket header is similar in angle.... post pics of your yaris header if you can, please __________________

12-14-2008, 07:56 PM	#2
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	doesn't look right to me -- I have a stock header I can measure tomorrow morning @ work. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

12-14-2008, 11:12 PM	#5
taKuto rice rocket Drives: 05 Echo Join Date: Feb 2007 Location: Toronto Posts: 163	'if i recall correctly' i'm still pissed off at the guy you bought it from, i wasted so much time trying to organize to pick it up from him since he was discussing shipping with me and then tells me he's selling to someone else. __________________

12-15-2008, 03:08 AM	#7
cleong Parallel Parking Pro View User's Garage Drives: Yaris 1.5 Manual Join Date: Dec 2006 Location: Singapore Posts: 590	If you're prepared to hack off one or more of your catalytic converters and weld in a section of replacement pipe angled to suit the DC, you could make it fit. But there's no turning back for this one though. __________________ Leong's NCP91 Toyota Yaris E Hankook V12 Evo 195/55/15 on Buddy Club P1 replicas 15x7 ET +38 Stebel horns, Philips Silvervision turn indicator bulbs TTE Lowering Springs, Camber bolts TRD Blue brake pads Fujitsubo Super Wagolis axleback exhaust DC Sports header

12-15-2008, 04:36 PM	#8
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	thebarber, your 6.5" vertical is about 5" on the stock header, and your 8.25" front to back is about 11" on the stock header. The angle at the end is completely different. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

12-14-2008, 09:19 PM	#3
PHXDEMON View User's Garage Drives: 2007 Red Liftback Join Date: Oct 2008 Location: Phoenix, AZ Posts: 885	This has already been covered. It will bolt to the engine fine but it won't meet up with the midpipe iirc.

12-14-2008, 10:41 PM	#4
ddongbap Banned Drives: yw calls me douche and racist. Join Date: Aug 2007 Location: hay Posts: 2,183	whats IIRC mean? I always ask, I always get an answer, but I always forget.

12-14-2008, 11:58 PM	#6
ztrack157 Vroom Vroom Beep Beep View User's Garage Drives: Powered Roller Skate Join Date: Oct 2008 Location: Biggs, CA Posts: 404	Sell it of scion life and put it towards one that fits. I measured my stock header for you and no numbers add up to what you get with the DC you have.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DC Sports Header install and evaluation	Loren	Performance Modifications	217	07-04-2017 06:40 AM
Megan Header Install [pics]	Chris07LB	Performance Modifications	132	09-29-2010 03:41 PM
Are We Still Stuck With the 4-1 Headers?	Sabretooth	Performance Modifications	31	02-20-2009 08:57 PM
Weapon R Header: In stock!	WeSellCarParts	WeSellCarParts	0	11-17-2008 08:21 PM
Looking for a Stock Header.	WRLEO	Performance Modifications	2	03-02-2007 06:49 PM