|
06-13-2010, 11:32 PM | #1 |
Drives: 09 YarHB Join Date: Feb 2009
Location: Canada
Posts: 175
|
Simota CB-314 Intake questions
Pulled out the stops to install today. :(
No pretty instructions inside the box(amongst all the popcorn bits) Removed the stock goods, looked at the picture on the Simota website. ??--- The mushroom airfilter is mashed up against the plastic(near the drivers side headlight enclosure). Is it supposed to be this tight? I snugged up(pushed that is) the rubber connects as much as possible. The "support like" looking piece of metal.. Is this to be put under the intake and attached where the stock airbox was? if so do you need to get a bolt for it? the one that was there to hold the stock airbox is far to long for this to work. One other concern: I logged some data for about 20 minutes with the stock airbox on, and then the Simota. The intake temperature is almost 20-25 degrees higher.... should it be this high? Thanks guys!! TMW Last edited by 2manywheels; 06-13-2010 at 11:35 PM. Reason: forgot top add a question! |
06-14-2010, 10:21 AM | #2 |
1NZ-6spd
Drives: '05 6-Spd Vitz RS Join Date: Oct 2008
Location: Oshawa, Ontario, Canada
Posts: 2,967
|
take a picture of the problem. Might be easier to solve that way.
|
06-14-2010, 12:16 PM | #3 |
Drives: 09 YarHB Join Date: Feb 2009
Location: Canada
Posts: 175
|
I'll swing over to the parkade over lunch and take a pic.
THX |
06-14-2010, 03:29 PM | #4 |
Drives: 09 YarHB Join Date: Feb 2009
Location: Canada
Posts: 175
|
pics of install
Simota
|
06-14-2010, 03:39 PM | #5 |
1NZ-6spd
Drives: '05 6-Spd Vitz RS Join Date: Oct 2008
Location: Oshawa, Ontario, Canada
Posts: 2,967
|
I don't know? Looks good to me. How squished is it? Is there a bracket holding it there or is it wedged in there?
|
06-14-2010, 05:11 PM | #6 |
Drives: 09 YarHB Join Date: Feb 2009
Location: Canada
Posts: 175
|
Good Ole Wedgie... its snug.. enough that it changes the shape of the filter.
What about Intake Temp? Should it be that high... or.. Do you think it should be that high? I like the office manager breathing warm.. but.. not sure the yaris likes that.. |
06-14-2010, 06:01 PM | #7 |
toyota
Drives: 2007 Yaris RS Blazed Join Date: Oct 2006
Location: toronto, canada
Posts: 3,637
|
turn the whole pipe clockwise/counter a bit so the nose goes up a little..
|
06-14-2010, 06:19 PM | #8 |
Drives: 09 YarHB Join Date: Feb 2009
Location: Canada
Posts: 175
|
I was going to try that, but thought the angle should match that of the throttle body area. It is angled upwards to wards the hood. Soooo.. I installed with the same angle. Just didnt want the intake tube touching the alumimum of the throttle body intake area....
Probably using all the wrong terminology.. LOL |
06-14-2010, 11:20 PM | #9 |
Drives: 2008 yaris sedan Join Date: Jan 2010
Location: Mid-Wilshire Cali
Posts: 84
|
wow that's a tight fit. am wondering if that also will happen to the sedans.
|
06-15-2010, 03:36 PM | #10 | |
Drives: 08 Yaris Join Date: Oct 2008
Location: Vancouver, BC
Posts: 365
|
Quote:
filter itself is tight but it is still in its original shape (no pun intended) and not squashed or anything.
__________________
RIP Yaris, I will miss your superb handling a lot. darkmoon87's picture thread http://www.yarisworld.com/forums/showthread.php?t=10013 |
|
06-17-2010, 11:37 PM | #11 |
ONE LOVE...YARiS LOVE!!!
|
hey darkmoon, think you could post some pictures? i would also like to get one cuz my weapon r filter fell off twice...and i could get myself a birthday gift as well...thanks =)
|
06-21-2010, 02:52 PM | #12 |
Drives: 09 YarHB Join Date: Feb 2009
Location: Canada
Posts: 175
|
Besides the fit, I am concerned about the high intake temperatures with it installed compared to the stock airbox.
I may pickup the afe unit as it has the shrouding around it that seals up at the top of the hood. Could also put some insulative foil at the same place where it seals. Just in case the hood is hot, therefore increasing the intake temp. Wallet hasn't closed in over a month.. haha |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Simota intake commercial | Red Horse | General Yaris / Vitz Discussion | 10 | 10-15-2009 07:38 PM |
The great intake debate! | fmicle | General Yaris / Vitz Discussion | 74 | 10-06-2009 11:37 PM |
SIMOTA short ram intake... | anubisx99 | Items for Sale by private party | 16 | 06-09-2009 12:40 PM |
Simota Carbon Charger Cold Air Intake | lilredrocket | Performance Modifications | 18 | 04-13-2009 03:16 AM |
Intake Systems Decision Maker.. | Blenjar | Performance Modifications | 25 | 09-15-2007 10:07 PM |