Yaris Intake Manifold

[Nexus1155]

i'll even send him my oem manifold for him to do it, he just needs someone local to him to come test fit it every now and then

Weapon R has made one for the XA or XB w/e and it is based off oem manifold i think and no gains FAIL, Holdeners longer runners provided gains....

[whooppee777]

Originally Posted by Nexus1155

Weapon R has made one for the XA or XB w/e and it is based off oem manifold i think and no gains FAIL, Holdeners longer runners provided gains....

the weapon r manifold doesnt have the right bolt pattern for the throttle body. xb/xa have 3 bolts yaris has 4. i had already looked into that long ago

[whooppee777]

Originally Posted by cali yaris

1. If I have a conversation with the manufacturer that is positive, WHICH I DID, I'm going to post that. Ztrack, are you telling me not to share real results?

2. It's not dead, whooppee. I'm going to buy a production run, regardless of how many people "sign up" or not. If you want in early, you'll get a better deal. So your point about the number isn't relevant.

3. I'm GETTING these made, one way or another. Dynatek owns the design and there is a confirmed prototype, so that is the easier route, I think.

Or.... go make your own, but it hasn't happened yet, has it?

if you stick the prototype manifold on ur engine i will kill you. if you car gets any more awesome a black hole will form at the earths core and all life will be over as we know it

[cali yaris]

LOL, I'll probably be LAST, like with the 23mm sway bars.

[whooppee777]

roof scoop hasnt been installed either has it?

[cali yaris]

What is that related to?

[ztrack157]

Originally Posted by cali yaris

1. If I have a conversation with the manufacturer that is positive, WHICH I DID, I'm going to post that. Ztrack, are you telling me not to share real results?

2. It's not dead, whooppee. I'm going to buy a production run, regardless of how many people "sign up" or not. If you want in early, you'll get a better deal. So your point about the number isn't relevant.

3. I'm GETTING these made, one way or another. Dynatek owns the design and there is a confirmed prototype, so that is the easier route, I think.

Or.... go make your own, but it hasn't happened yet, has it?

Garm I have more faith in you than anyone else on the forum. You put up and rather than shut up and deliver. I'm not telling you to not share results. I'm just visual I want to see something rather than hear about possibilities. ZPI and Tricky Dicky have made me skittish. When its in production I will be in line but until then... well you know how that goes. Good luck

[bubaa]

good luck i hope to see that manifold later on production

[newyar]

If this comes alive and becomes a real product I'm definitely interested.

[ROCKLAND TOYOTA]

Originally Posted by whooppee777

how the hell did i miss that post.

i still say its dead.

i highly doubt dynatek is going to make the manifolds for half a dozen yaris owners that are willing to buy them.

turboyaris can make this. i'll even send him my oem manifold for him to do it, he just needs someone local to him to come test fit it every now and then

he needs a manifold? i have 2 sitting around right now. pm going to him now.

[cali yaris]

He'll need time with a car and a dyno to test the design. You can't just make one of these and assume it makes more power.

[ROCKLAND TOYOTA]

Originally Posted by cali yaris

He'll need time with a car and a dyno to test the design. You can't just make one of these and assume it makes more power.

I'LL start him on his journey and see where it ends up. the manifold is just sitting around so what harm is there. besides he has his own car to use and access to a dyno i believe.....

[Sabretooth]

I thought turboyaris was doing 240sx's now?

[Sabretooth]

Oh and it wouldnt be the first time that turboyaris has built an intake mani for our cars...
did some diggin.

http://www.yarisworld.com/forums/showthread.php?t=6285

[Sabretooth]

Originally Posted by whooppee777

the weapon r manifold doesnt have the right bolt pattern for the throttle body. xb/xa have 3 bolts yaris has 4. i had already looked into that long ago

Get in touch with Morgan, she obviously did the retrofit of TB setups for her blitz kit...maybe she can give us the right direction on making a weapon r intake manifold for the xb fit.

[whooppee777]

im trying to buy his 240sx at the moment having issues allocating the monies for it. he has a 300zx also. he does not have a yaris to test a manifold on, someone would have to bring their yaris to him if he fabricates one

[Sabretooth]

Where is he located?

[cali yaris]

besides he has his own car to use and access to a dyno i believe.....

Not a Yaris. That's at least partly why we don't have harness bars yet?