DIY Cruise Control for 2012 Yaris - Good News!

[scmoky]

And check with you VIN number and model, if under electrical categorie is cruise control(auto drive) option.
webpage http://www.toyodiy.com/parts/

[Stenis]

Originally Posted by CTScott

No. Just remove the two screws that are exposed by turning the steering wheel to either side and the one down by the tilt lever

Hi CTScott
Sorry for the late reply. Took some pictures under the wheel, hope that you can see someting i can't, hopefully you can tell if the wires are present or not?
//Stenis

image.jpg

image (2).jpg

image (4).jpg

[CTScott]

The connector of interest is the black one at the top left of this picture. I see by the number of wires that you have steering wheel audio controls. I can't see all of the wires, but the blue one looks like it is in the correct position.

[Stenis]

Originally Posted by CTScott

The connector of interest is the black one at the top left of this picture. I see by the number of wires that you have steering wheel audio controls. I can't see all of the wires, but the blue one looks like it is in the correct position.

OK I WILL TRY TO TAKE A BETTER PICTURE // BACK SOON
AND THANKS AGAIN FOR ALL THE HELP

[rc_osu]

Hi!

I just bought a 2012 Yaris and so far it's great, but it too lacks cruise control (among a few other things, but that's the big one). A google search for how to add it brought me to this forum, so I thought I would see if there are still parts available! I'm not very good with cars and the terminology involved so please forgive me if I ask dumb questions. The basic extent of my skills are I can hold it, or I can go get it! So I'm hoping I can learn a little bit about this too.

The Yaris I have isn't like the ones in the pictures though, it has the gauges in the center like fredansandy described.

If you have parts available still for it, could you let me know?
Thanks!

[CTScott]

Originally Posted by rc_osu

Hi!

I just bought a 2012 Yaris and so far it's great, but it too lacks cruise control (among a few other things, but that's the big one). A google search for how to add it brought me to this forum, so I thought I would see if there are still parts available! I'm not very good with cars and the terminology involved so please forgive me if I ask dumb questions. The basic extent of my skills are I can hold it, or I can go get it! So I'm hoping I can learn a little bit about this too.

The Yaris I have isn't like the ones in the pictures though, it has the gauges in the center like fredansandy described.

If you have parts available still for it, could you let me know?
Thanks!

Your 2011 Sedan is really a 2011 as far as cruise control goes. The sedan did not get the 2012 revision that the liftback did. I just shot you a PM with the info on the parts.

[Stenis]

Hi again, CTscott

Took some more pictures today. Totaly are there 6 cables to this connection. Cables colour are blue, pink, red, black, brown and light brown.
Can you tell if my car is ready for cruise control.

Thanks again // Stenis

Attachment 53400

Attachment 53401

Attachment 53402

[CTScott]

Originally Posted by Stenis

Hi again, CTscott

Took some more pictures today. Totaly are there 6 cables to this connection. Cables colour are blue, pink, red, black, brown and light brown.
Can you tell if my car is ready for cruise control.

Thanks again // Stenis

The beige and brown wires in pins 1 and 2 are the cruise control wires, so you are good to go for installing cruise control. If you are interested I sell the stalk with wiring harness and mounting screws for far less than dealer price. Even with shipping to Sweden it would be quite a bit less.

[geoded]

In this picture, which is 12V +, after switch ON? Please?

[CTScott]

Nothing visible in that picture is switched +12. Below that picture is the connector for the ignition switch and the pink wire on that connector is switched +12.

[geoded]

Hi CTScott, please tell me which is the color wire coming out of the 12 + immobilizer when the switch is ON

[CTScott]

Originally Posted by geoded

Hi CTScott, please tell me which is the color wire coming out of the 12 + immobilizer when the switch is ON

You should really have posted your questions in a separate thread, as this is not cruise control related, but the 12 volt immobilizer power wire is the pink wire on the black connector at the end of the black plastic section of the ignition switch assembly.

[Zantiszar]

Hello CTScott after about reading the whole lot of posts I wanted to ask you will this work on a 2014 5 door model L Yaris it's has a 1.5L engine on it and it's an automatic drive model.

I'm curious since my dash looks a lot like yours and for long trips CC would be very useful especially when visiting the family across the island :D your input is much appreciated


Sent my iPush 4s?

[CTScott]

Originally Posted by Zantiszar

Hello CTScott after about reading the whole lot of posts I wanted to ask you will this work on a 2014 5 door model L Yaris it's has a 1.5L engine on it and it's an automatic drive model.

I'm curious since my dash looks a lot like yours and for long trips CC would be very useful especially when visiting the family across the island :D your input is much appreciated


Sent my iPush 4s?

Yes - Cruise control would work with no problem on your 2014. For your automatic you would only need the stalk with harness and mounting screws.

[geoded]

Originally Posted by CTScott

I am looking for the connector on the left in the photo below. You will remove the two screws behind the steering wheel and the one by the tilt lever to remove the lower cover.

This is my car connector, (1ND-TV), has beige and brown is, but cruise control does not work. :-)

[CTScott]

Correct - The 1ND-TV engine computer does not have cruise control capability built into it.

[geoded]

But the harness exist :-)

[CTScott]

Originally Posted by geoded

But the harness exist :-)

Yes. Toyota was not nice to include the wires but not the function.