OBD II on Toyota Vitz 2009 - Toyota Yaris Forums

SM-17 · 06-09-2016, 01:43 AM

Hi All,

I own a Toyota Vitz 2009 Japan import, 996cc 1KR-FE Engine, T410CVT and would like to know if it uses OBD II or a variant of OBD so that I can buy the OBDlink MX scanner to see ecu codes Etc.

The wired pins on the port are: Pin 4, 6, 7, 9, 12, 13, 14, 16

Thanks to all

tarkus · 06-09-2016, 04:26 PM

I don't know about the Vitz, but the Yaris uses pretty standard OBD II, and I've been able to use a regular OBD II Bluetooth dongle with no problems. I seriously doubt that the Japan version of the same car would be different at this level.

Sent from my LG-D801 using Tapatalk

SM-17 · 06-09-2016, 04:38 PM

Yaris and vitz have different electronics, the port active pins are different thus probably a different protocol

My cousin has a yaris uk import and obd port have different active pin layout.

Sent from my SM-N910C using Tapatalk

CTScott · 06-09-2016, 07:33 PM

Vitz is not OBDII. It is M-OBD.

tarkus · 06-09-2016, 11:45 PM

I stand corrected. I also find that pretty strange.

Sent from my LG-D801 using Tapatalk

SM-17 · 06-10-2016, 01:35 AM

@CTScott

So, to use obdlink MX (and torque app) do I need a different init. String and different pid's?

I think this is the init string required : ATIB 96 \n ATIIA 13 \n ATSH8213F0 \n ATSP4 \n 0100

Can you give me a hint about pid's please? cos i cannot find any

Thank you!

Sent from my SM-N910C using Tapatalk

CTScott · 06-10-2016, 05:38 AM

Quote:

Originally Posted by SM-17

@CTScott

So, to use obdlink MX (and torque app) do I need a different init. String and different pid's?

I think this is the init string required : ATIB 96 \n ATIIA 13 \n ATSH8213F0 \n ATSP4 \n 0100

Can you give me a hint about pid's please? cos i cannot find any

Thank you!

Sent from my SM-N910C using Tapatalk

M-ODB is a completely different protocol. I don't have any info on it.

AGDS91 · 01-31-2017, 10:05 AM

hola.
Que escaner es compatible con el vitz rs 2005?
Elm327 No Work.
Easy Diagnostic for launch x431 - Varias marcas de automoviles?¿
TachYon T100 BT - solo toyota?¿

sceh · 07-15-2017, 02:46 PM

Under no circumstances buy Tachyon. I had the Tachyon T1 and it never worked and there is ZERO support - they never reply to mails and you might just find someone on the forum. The Android application is a joke and NONE of the advertised functions work at all - like reading or clearing DTCs.
COn trick

06-09-2016, 01:43 AM	#1
SM-17 Drives: Toyota Vitz 2009 Join Date: Jun 2016 Location: Malta Posts: 6	OBD II on Toyota Vitz 2009 Hi All, I own a Toyota Vitz 2009 Japan import, 996cc 1KR-FE Engine, T410CVT and would like to know if it uses OBD II or a variant of OBD so that I can buy the OBDlink MX scanner to see ecu codes Etc. The wired pins on the port are: Pin 4, 6, 7, 9, 12, 13, 14, 16 Thanks to all

06-09-2016, 07:33 PM	#4
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,460	Vitz is not OBDII. It is M-OBD. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Toyota axes Scion	Kar98	Off-topic / Other Cars / Everything else Discussions	15	02-10-2016 12:01 PM
2009 Toyota Vitz/Yaris 1.3L hatchback Engine Heating Up	VitzBD	DIY / Maintenance / Service	8	09-22-2015 07:01 PM
Toyota yaris hatchback headlight fits on Vitz 2005?	urguardian	Cosmetic Modifications (Exterior/Interior)	2	09-11-2014 04:46 PM
DIY, can i install HID which have High and low beam together in Vitz 2009?	digitalprecinct	Cosmetic Modifications (Exterior/Interior)	14	05-02-2014 05:47 PM
FS: JDM Vitz RS Front (2009) and Rear (2007) Bumper (AZ and Possibly So Cal)	jmew0ng	Items for Sale by private party	23	10-05-2013 12:24 AM

06-09-2016, 04:26 PM	#2
tarkus Drives: 2006 Yaris RS 3-Door Join Date: Feb 2016 Location: YYZ Posts: 329	I don't know about the Vitz, but the Yaris uses pretty standard OBD II, and I've been able to use a regular OBD II Bluetooth dongle with no problems. I seriously doubt that the Japan version of the same car would be different at this level. Sent from my LG-D801 using Tapatalk

06-09-2016, 04:38 PM	#3
SM-17 Drives: Toyota Vitz 2009 Join Date: Jun 2016 Location: Malta Posts: 6	Yaris and vitz have different electronics, the port active pins are different thus probably a different protocol My cousin has a yaris uk import and obd port have different active pin layout. Sent from my SM-N910C using Tapatalk

06-09-2016, 11:45 PM	#5
tarkus Drives: 2006 Yaris RS 3-Door Join Date: Feb 2016 Location: YYZ Posts: 329	I stand corrected. I also find that pretty strange. Sent from my LG-D801 using Tapatalk

06-10-2016, 01:35 AM	#6
SM-17 Drives: Toyota Vitz 2009 Join Date: Jun 2016 Location: Malta Posts: 6	@CTScott So, to use obdlink MX (and torque app) do I need a different init. String and different pid's? I think this is the init string required : ATIB 96 \n ATIIA 13 \n ATSH8213F0 \n ATSP4 \n 0100 Can you give me a hint about pid's please? cos i cannot find any Thank you! Sent from my SM-N910C using Tapatalk

01-31-2017, 10:05 AM	#8
AGDS91 Drives: VITZ RS 2005 NCP91 Join Date: Jan 2017 Location: PARAGUAY Posts: 2	hola. Que escaner es compatible con el vitz rs 2005? Elm327 No Work. Easy Diagnostic for launch x431 - Varias marcas de automoviles?¿ TachYon T100 BT - solo toyota?¿

07-15-2017, 02:46 PM	#9
sceh Drives: yaris 2004 Join Date: Jul 2017 Location: france Posts: 40	Under no circumstances buy Tachyon. I had the Tachyon T1 and it never worked and there is ZERO support - they never reply to mails and you might just find someone on the forum. The Android application is a joke and NONE of the advertised functions work at all - like reading or clearing DTCs. COn trick