 |
 |
|
|
03-16-2024, 03:34 PM
|
#1 |
 
Drives: 2008 Toyota Yaris Hatchback MT Join Date: Feb 2024
Location: Floyd, VA
Posts: 4
|
1ZZ Throttle Body Upgrade
I just got the 1ZZ throttle body from a 2005 Corolla. Part# 22030 - 0D030
It takes 4 bolts and has 2 angled hose hookups. Do I need to swap over the black plastic rivet part of my stock throttle body onto the 1ZZ? I have a 2008 Yaris hatchback 1.5L manual. |
|
|
|
03-16-2024, 10:48 PM
|
#2 |
|
Gen 3 > Gen 2
Drives: NCP131, F-150 Join Date: Jul 2019
Location: Red Deer, AB
Posts: 501
|
You don't HAVE to but some users have reported drivability issues when doing this mod that is usually fixed by swapping boards. YMMV.
__________________
2014 NCP131 5 Speed 2007 F150 4.2L 5 Speed 2013 Rav4 LE AWD Autotragic - Wife's 
|
|
|
|
|
03-17-2024, 01:22 PM
|
#3 |
|
Drives: 2008 Toyota Yaris Hatchback MT Join Date: Feb 2024
Location: Floyd, VA
Posts: 4
|
Okay thanks
|
|
|
|
|
03-17-2024, 03:57 PM
|
#4 |
 Drives: NCP90 TRD Yaris Manual Join Date: Oct 2022
Location: Auckland, NZ
Posts: 270
|
You will need to swap the black pastic board riveted on yes, otherwise it will throw error codes and ether not drive at all or put you in limp mode. Its an easy swap drill out rivets and swap then bolt or revite back together. You will also need to adjust the idle with the little hex screw hidden under the yellow glue.
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 1zz throttle body +what intake?? | 0BD1Kenobi | Performance Modifications | 17 | 10-21-2019 07:45 AM |
| 1zz Throttle Body Question | rabbito | Performance Modifications | 5 | 12-08-2015 11:09 PM |
| [Buy] throttle body 1zz yaris 1800cc to 1500cc TS | Nets | Items for Sale by private party | 2 | 04-25-2010 10:27 AM |
| 1ZZ throttle body | aucorium | Performance Modifications | 44 | 03-14-2010 12:57 AM |
| 1ZZ-FE throttle body | crxgames | Items for Sale by private party | 1 | 04-27-2009 05:19 PM |
Linear Mode
