HEADER & INTAKE R&D. - Toyota Yaris Forums

WRLEO · 11-10-2006, 04:24 PM

Looking for a Test car for our 4-2-1 Street Header & Intake system.

Here are some pictures of our newest Header for the Celica.

If anyone in the Bay Area is intrested please PM or Email me.

YamilR · 11-10-2006, 04:27 PM

That looks awesome. Could you give an estimate on the price?

WRLEO · 11-10-2006, 04:45 PM

It's going to be as cheap as the OBX or MEGAN ( SAME KIND OF PRODUCTS )
i was talking to my production manager since we make the headers in USA, and he said it should be in the range of $350. But a group buy will help the price get alittle lower. Now only if i can get a car over here to test fit it and confirm 100% perfect fit.

Violin · 11-10-2006, 04:46 PM

Again with the West Coast.

Sheesh!

WRLEO · 11-10-2006, 04:48 PM

Here are the dyno results from our Xb / Xa Header which is the same platform we just changed some brackets around. So performance should be exactly the same, if the ecu is the same.

DYNO RUN VIDEO:
http://www.monstermotorworks.com/ima...headertest.AVI

YamilR · 11-10-2006, 05:00 PM

The Megan is ofered in a GB for 20 people for $190.

WRLEO · 11-10-2006, 06:20 PM

Compare Apples with Apples..
Megan is 4-1. WR is 4-2-1 which is proven to make more power.

*Chris07LB* · 11-10-2006, 06:26 PM

Nice.

C2AUTOSPL · 11-10-2006, 09:47 PM

HEy Leo, its me Jay from FitFreak. Nice to see you on here :)

Katana · 11-11-2006, 08:59 AM

Are you planning on releasing a 4-2-1 header for the 1.3lt engine(2SZ-FE)?

ItsMyDaily · 11-11-2006, 10:45 AM

Wow is that dyno compared to stock? Do I see a 11torque increase over stock, and a 11whp increase over stock????! Those are very nice increase in numbers. And it's classic 4-2-1 design showing very good gains botom end, and a nice increase throughout the entire powerband. The question is was the dyno done with just the header as the only mod?

WRLEO · 11-11-2006, 11:08 AM

yes that was the only mod.
we are planning to do a 1.3L header also.

Were looking for a final test fit car to check the fitment 100%.
anyone in the bay area?

Katana · 11-12-2006, 10:55 AM

Quote:

Originally Posted by WRLEO

yes that was the only mod.
we are planning to do a 1.3L header also.

Let me know cause I am extremely interested!!!

dngz · 11-11-2006, 12:07 PM

=( id rather have these headers than the MR ones =(.....

ItsMyDaily · 11-11-2006, 12:55 PM

Quote:

Originally Posted by dngz

=( id rather have these headers than the MR ones =(.....

so just leave the group buy and wait for these.

BulletProofAuto · 11-11-2006, 05:57 PM

i got to see some of their products in person at sema during my stroll around. i was impressed with the quality to price ratio.

*Chris07LB* · 11-11-2006, 06:03 PM

Quote:

Originally Posted by john@bp

i got to see some of their products in person at sema during my stroll around. i was impressed with the quality to price ratio.

Whats up John... Hey, you going to be back in NV for CES, Ill buy ya a few cold one's.

Violin · 11-11-2006, 09:50 PM

I'm glad I waited.

Be sure to post more once it's tested and ready for market.

11-10-2006, 04:24 PM	#1
WRLEO Drives: Yaris Join Date: Nov 2006 Location: San Francisco Posts: 46	HEADER & INTAKE R&D. Looking for a Test car for our 4-2-1 Street Header & Intake system. Here are some pictures of our newest Header for the Celica. If anyone in the Bay Area is intrested please PM or Email me.

11-10-2006, 09:47 PM	#9
C2AUTOSPL Drives: 240sx, 00 Celica Join Date: Apr 2006 Location: Loma Linda, CA Posts: 691	HEy Leo, its me Jay from FitFreak. Nice to see you on here :) __________________ SUPPORT YARISWORLD'S VERY FIRST SPONSOR!! C2 AUTOMOTIVE SPECIAL 24711 Redlands Blvd., Ste. I Loma Linda, CA 92354 T: 909-796-8189 E-mail: info@c2auto.com AIM: wide180sx

11-11-2006, 08:59 AM	#10
Katana Drives: Yaris LB 1.3lt 06 Join Date: Aug 2006 Location: Under the hood! Posts: 1,124	Are you planning on releasing a 4-2-1 header for the 1.3lt engine(2SZ-FE)? __________________ It's not the ride, it's the rider!

11-11-2006, 10:45 AM	#11
ItsMyDaily The LittleBastard View User's Garage Drives: 2007 Yaris Liftback Join Date: Sep 2006 Location: Los Angeles, CA Posts: 297	Wow is that dyno compared to stock? Do I see a 11torque increase over stock, and a 11whp increase over stock????! Those are very nice increase in numbers. And it's classic 4-2-1 design showing very good gains botom end, and a nice increase throughout the entire powerband. The question is was the dyno done with just the header as the only mod? __________________ Yaris Mods: 20% Tints Ground wires 2007 Toyota Yaris Liftback - Current 2004 Honda S2000 - Sold 1986 Toyota Corolla SR5 - Sold DIY: Groundwire Kit

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
For Sale - Custom Intake	thewifesyaris	Items for Sale by private party	38	01-18-2009 06:47 PM
AEM INTAKE *UPDATE*	riceboy	Performance Modifications	30	09-10-2007 07:35 PM
Intake group buy?	Lowfront	Items for Sale by private party	20	11-17-2006 04:45 PM
K&N Is looking for 2007 Yaris for Intake Development.	Knfilters	Performance Modifications	9	06-28-2006 04:34 PM
Cold Air Intake ?	pegcityrs	Performance Modifications	47	04-17-2006 07:43 AM

11-10-2006, 04:27 PM	#2
YamilR View User's Garage Drives: Absolutely Red Liftback Join Date: Aug 2006 Location: San Diego, CA Posts: 570	That looks awesome. Could you give an estimate on the price?

11-10-2006, 04:45 PM	#3
WRLEO Drives: Yaris Join Date: Nov 2006 Location: San Francisco Posts: 46	It's going to be as cheap as the OBX or MEGAN ( SAME KIND OF PRODUCTS ) i was talking to my production manager since we make the headers in USA, and he said it should be in the range of $350. But a group buy will help the price get alittle lower. Now only if i can get a car over here to test fit it and confirm 100% perfect fit.

11-10-2006, 04:46 PM	#4
Violin View User's Garage Drives: 2007 Yaris LB Auto Join Date: Jul 2006 Location: New Jersey Posts: 1,592	Again with the West Coast. Sheesh!

11-10-2006, 04:48 PM	#5
WRLEO Drives: Yaris Join Date: Nov 2006 Location: San Francisco Posts: 46	Here are the dyno results from our Xb / Xa Header which is the same platform we just changed some brackets around. So performance should be exactly the same, if the ecu is the same. DYNO RUN VIDEO: http://www.monstermotorworks.com/ima...headertest.AVI

11-10-2006, 05:00 PM	#6
YamilR View User's Garage Drives: Absolutely Red Liftback Join Date: Aug 2006 Location: San Diego, CA Posts: 570	The Megan is ofered in a GB for 20 people for $190.

11-10-2006, 06:20 PM	#7
WRLEO Drives: Yaris Join Date: Nov 2006 Location: San Francisco Posts: 46	Compare Apples with Apples.. Megan is 4-1. WR is 4-2-1 which is proven to make more power.

11-10-2006, 06:26 PM	#8
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	Nice.

11-11-2006, 11:08 AM	#12
WRLEO Drives: Yaris Join Date: Nov 2006 Location: San Francisco Posts: 46	yes that was the only mod. we are planning to do a 1.3L header also. Were looking for a final test fit car to check the fitment 100%. anyone in the bay area?

11-11-2006, 12:07 PM	#14
dngz View User's Garage Drives: black yaris sedan Join Date: Jun 2006 Location: vancouver Posts: 475	=( id rather have these headers than the MR ones =(.....

11-11-2006, 05:57 PM	#16
BulletProofAuto Drives: 00 itr Join Date: May 2006 Location: Gardena, CA Posts: 227	i got to see some of their products in person at sema during my stroll around. i was impressed with the quality to price ratio.

11-11-2006, 09:50 PM	#18
Violin View User's Garage Drives: 2007 Yaris LB Auto Join Date: Jul 2006 Location: New Jersey Posts: 1,592	I'm glad I waited. Be sure to post more once it's tested and ready for market.