12v plug thingy - Toyota Yaris Forums

KSIbucky · 07-14-2007, 08:29 PM

i was wondering what wire to use from the plug the gray or the black and white one thanx

edit: also does anyone know how to take the plug out

flighttekchris · 07-14-2007, 09:04 PM

=

Quote:

Originally Posted by KSIbucky

i was wondering what wire to use from the plug the gray or the black and white one thanx

i think you are asking what wire is the positive and what is the negative.. right?? the wire on the center pin is positive the other is the ground

KSIbucky · 07-14-2007, 11:29 PM

ya i'm wondering what one is postive do you know what color the wire is otherwise i can figure it out

flighttekchris · 07-15-2007, 07:19 AM

i think the positive wire is gray check the Electrical Wiring Diagram Manual page 220, hope that helps,

chris
wichita ks

Edd · 07-15-2007, 07:50 AM

You could just use a multimeter. Or for a ghetto check, just put an LED in, as it will only light up when it's the right way around (although it will overheat and blow quickly without a resistor with it). Remember on an LED, flat side = negative and long wire = positive.

07-14-2007, 08:29 PM	#1
KSIbucky View User's Garage Drives: 2007 Yaris manual dark silver Join Date: May 2006 Location: Fond du Lac, WI Posts: 694	12v plug thingy i was wondering what wire to use from the plug the gray or the black and white one thanx edit: also does anyone know how to take the plug out __________________ 7 Color Tach Fujita Intake Momo pedals Shift knob and boot. Full TRD SSK. Blitz exhaust Megan Lowering Springs (Next is DC Header) Last edited by KSIbucky; 07-14-2007 at 11:32 PM.

07-14-2007, 11:29 PM	#3
KSIbucky View User's Garage Drives: 2007 Yaris manual dark silver Join Date: May 2006 Location: Fond du Lac, WI Posts: 694	ya i'm wondering what one is postive do you know what color the wire is otherwise i can figure it out __________________ 7 Color Tach Fujita Intake Momo pedals Shift knob and boot. Full TRD SSK. Blitz exhaust Megan Lowering Springs (Next is DC Header)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Good place to find constant & switched 12V behind dash?	atebit	In Car Entertainment + Electronics (audio / video / alarm)	16	03-03-2009 10:40 AM
Toyota AUX plug w/ aftermarket radio?	eight_heads	In Car Entertainment + Electronics (audio / video / alarm)	20	09-07-2007 02:41 AM
DIY: 700w Power Inverter & additional 12v aux. plug w/pics	Astroman	DIY / Maintenance / Service	6	08-08-2007 01:05 PM
DIY: Discreet Mounting of 12V adaptor for the Gtech & V1	H8SGAS	DIY / Maintenance / Service	7	09-26-2006 02:50 AM
Harman Kardon Drive + Play for IPOD	sroberts	In Car Entertainment + Electronics (audio / video / alarm)	5	07-01-2006 01:05 PM

07-15-2007, 07:19 AM	#4
flighttekchris Drives: 2007 Yaris 3door Join Date: Apr 2007 Location: Wichita Ks Posts: 15	i think the positive wire is gray check the Electrical Wiring Diagram Manual page 220, hope that helps, chris wichita ks

07-15-2007, 07:50 AM	#5
Edd Drives: None Join Date: Mar 2007 Location: Australia Posts: 193	You could just use a multimeter. Or for a ghetto check, just put an LED in, as it will only light up when it's the right way around (although it will overheat and blow quickly without a resistor with it). Remember on an LED, flat side = negative and long wire = positive.