Fogs that won't light

[Golddeenoh]

I installed the fog light per the instructions:

http://www.microimageonline.com/down...ts_install.pdf

http://www.microimageonline.com/down...h%20Wiring.pdf

^this one tells me to remove the wrong resistor, the other one is the one that should be removed as it is the one that will stay on. so now I will have to remove both, unless I just broke the switch all together by removing the one.

I followed all the instructions as they are in both of the above. the switch lights come one but the fog lights do not. also the list image for the second set of instructions says to connect a connector together by the linkage. I only have the male end. no other connector.

1 Do I remove the wire from the switch and connect it to the open connector?
2 Would this be the reason as to why my fog light will not light?