Removal of the door panel - Toyota Yaris Forums

Golddeenoh · 02-21-2013, 05:32 PM

There is a rattling noise coming from my drivers side door every time I close the door or hit a bump. does anyone have a diagram or set of instructions for removing the door panel?

CTScott · 02-21-2013, 05:52 PM

There's a thread in the DIY section called something like "30 second door panel removal".

Golddeenoh · 02-22-2013, 01:33 PM

http://www.yarisworld.com/forums/sho...+panel+removal

found it thanks

Golddeenoh · 02-24-2013, 02:34 PM

well i fixed the rattle in the door, apparently this bracket had come lose where it has foam gluing it to the outside door panel.

i put a few dabs of super glue on the foam and pushed it back where it was, and for added redneck assurance, some duct tape.

CTScott · 02-24-2013, 02:39 PM

Superglue is only for non-porous materials. I would use Automotive Goop instead, which will do a good job of bonding it back in place.

Golddeenoh · 02-24-2013, 03:58 PM

its was dry rotted looking and torn, the duct tap should hold it together. since my budget for repairs right now is 0 i will have to stick with what i did instead of acquiring something else. thanks for the info :D

Gil Gondreth · 04-26-2014, 10:01 PM

In case anyone is wondering if this is the source of your rattle, here's a video so you can compare the sound to what you've been hearing. https://www.youtube.com/watch?v=Dfza6yZjXUc

02-21-2013, 05:32 PM	#1
Golddeenoh Takes corners too fast! View User's Garage Drives: Absolute Red 2009 Yaris HB Join Date: Apr 2012 Location: Columbia, SC Posts: 830	Removal of the door panel There is a rattling noise coming from my drivers side door every time I close the door or hit a bump. does anyone have a diagram or set of instructions for removing the door panel? __________________ mods:15''Drag DR21 w/Nitto NeoGen 205/50R15, Tanabe DF210 lowering springs 1.6/1.8, TRD Rear Sway Bar, Tanabe Front Sway Bar, Micro Image Short Throw Shift Kit (both in and under), 8.64lbs flywheel, F1 Stage 4 Clutch, AEM Cold Air Intake (Red), Megan Racing Header, DC Sports Axle Back Exhaust, Micro Image Crank Pulley, NST lite Alternator Pulley, ARP Manifold Stud Kit,Tanabe Front Strut Tower Brace, ScanGuage II, Micro Image Silicone Radiator Hose Kit (Red), NRG Carbon Fiber Shift Knob (round), 2009-2011 Toyota Yaris Liftback Foglight kit, NRG Grounding Kit (Red), Hella Horns(Red),CF Hood

02-21-2013, 05:52 PM	#2
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,460	There's a thread in the DIY section called something like "30 second door panel removal". __________________

02-22-2013, 01:33 PM	#3
Golddeenoh Takes corners too fast! View User's Garage Drives: Absolute Red 2009 Yaris HB Join Date: Apr 2012 Location: Columbia, SC Posts: 830	http://www.yarisworld.com/forums/sho...+panel+removal found it thanks __________________ mods:15''Drag DR21 w/Nitto NeoGen 205/50R15, Tanabe DF210 lowering springs 1.6/1.8, TRD Rear Sway Bar, Tanabe Front Sway Bar, Micro Image Short Throw Shift Kit (both in and under), 8.64lbs flywheel, F1 Stage 4 Clutch, AEM Cold Air Intake (Red), Megan Racing Header, DC Sports Axle Back Exhaust, Micro Image Crank Pulley, NST lite Alternator Pulley, ARP Manifold Stud Kit,Tanabe Front Strut Tower Brace, ScanGuage II, Micro Image Silicone Radiator Hose Kit (Red), NRG Carbon Fiber Shift Knob (round), 2009-2011 Toyota Yaris Liftback Foglight kit, NRG Grounding Kit (Red), Hella Horns(Red),CF Hood

02-24-2013, 02:39 PM	#5
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,460	Superglue is only for non-porous materials. I would use Automotive Goop instead, which will do a good job of bonding it back in place. __________________

02-24-2013, 03:58 PM	#6
Golddeenoh Takes corners too fast! View User's Garage Drives: Absolute Red 2009 Yaris HB Join Date: Apr 2012 Location: Columbia, SC Posts: 830	its was dry rotted looking and torn, the duct tap should hold it together. since my budget for repairs right now is 0 i will have to stick with what i did instead of acquiring something else. thanks for the info :D __________________ mods:15''Drag DR21 w/Nitto NeoGen 205/50R15, Tanabe DF210 lowering springs 1.6/1.8, TRD Rear Sway Bar, Tanabe Front Sway Bar, Micro Image Short Throw Shift Kit (both in and under), 8.64lbs flywheel, F1 Stage 4 Clutch, AEM Cold Air Intake (Red), Megan Racing Header, DC Sports Axle Back Exhaust, Micro Image Crank Pulley, NST lite Alternator Pulley, ARP Manifold Stud Kit,Tanabe Front Strut Tower Brace, ScanGuage II, Micro Image Silicone Radiator Hose Kit (Red), NRG Carbon Fiber Shift Knob (round), 2009-2011 Toyota Yaris Liftback Foglight kit, NRG Grounding Kit (Red), Hella Horns(Red),CF Hood

04-26-2014, 10:01 PM	#7
Gil Gondreth Drives: 07 yaris 3-door liftback Join Date: Mar 2014 Location: Phx Arizona Posts: 3	In case anyone is wondering if this is the source of your rattle, here's a video so you can compare the sound to what you've been hearing. https://www.youtube.com/watch?v=Dfza6yZjXUc

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Auto Transmission removal	artichap	DIY / Maintenance / Service	14	10-23-2012 10:27 PM
99 Vitz Hatchback rear outer door handle removal	deadalus	DIY / Maintenance / Service	3	09-06-2010 02:02 AM
Removal of the Factory Integrated Source	sqcomp	In Car Entertainment + Electronics (audio / video / alarm)	7	08-24-2010 12:44 AM
Weight Savings - Removal, Reduction, Reminder....	TRD_Yaris	Performance Modifications	17	08-12-2006 02:07 PM