DIY INTAKE - Page 13 - Toyota Yaris Forums

AlphaFox · 04-09-2007, 11:44 PM

did he get you chino?!

spkrman · 04-09-2007, 11:51 PM

I hear the dude above is driving this to chino's house right now.

ChinoCharles · 04-10-2007, 12:16 AM

This is your last teaser till number one is done!!!

Picture 009.jpg

spkrman · 04-10-2007, 01:18 AM

Quote:

Originally Posted by ChinoCharles

This is your last teaser till number one is done!!!

Attachment 4336

yummy

eTiMaGo · 04-10-2007, 04:29 AM

looks like a high tech bong... multipurpose device, Chino?

Nutzoids · 04-10-2007, 09:08 AM

Quote:

Originally Posted by eTiMaGo

looks like a high tech bong... multipurpose device, Chino?

high...bong...tech...

Shit yeah!

I know 420 is right around the corner... there are weed jokes EVERYWHERE!

AlphaFox · 04-10-2007, 11:34 AM

so........... sick............of.................... waiting......

Black Yaris · 04-10-2007, 11:46 AM

Quote:

Originally Posted by AlphaFox

so........... sick............of.................... waiting......

go grab a beer or two

AlphaFox · 04-10-2007, 08:49 PM

ok I have a beer... its not helping. ;)

acrbill · 04-10-2007, 09:09 PM

Quote:

Originally Posted by ChinoCharles

This is your last teaser till number one is done!!!

Attachment 4336

sweet! Looks like it shouldn't cost more than $50!

ChinoCharles · 04-11-2007, 02:02 AM

Quote:

Originally Posted by acrbill

sweet! Looks like it shouldn't cost more than $50!

No, no Bill, stop looking at your wife. Look at the INTAKE!

PetersRedYaris · 04-11-2007, 01:43 PM

Quote:

Originally Posted by acrbill

sweet! Looks like it shouldn't cost more than $50!

$50??? Maybe with a filter and all the hardware included.

Just giving you crap, looks pretty good. What about a support to keep the pipe steady and prevent the filter from flopping around?

ChinoCharles · 04-11-2007, 01:46 PM

You guys do understand we still need to go through a second design of the MAF plate, get that welded, flare the end of the pipe, paint or powedercoat it, make and weld some mounts, find appropriate hardware... it isn't done.

*Chris07LB* · 04-11-2007, 05:02 PM

Quote:

Originally Posted by ChinoCharles

You guys do understand we still need to go through a second design of the MAF plate, get that welded, flare the end of the pipe, paint or powedercoat it, make and weld some mounts, find appropriate hardware... it isn't done.

Hence why I said to wait before posting anything.

AlphaFox · 04-12-2007, 05:35 PM

wow, this got off track.. can we just stick to talking about the intake now?

btw, hows it going charles?

*Chris07LB* · 04-12-2007, 05:39 PM

Intake is coming along. Charles is doing a fine job.

AlphaFox · 04-12-2007, 05:39 PM

Quote:

Originally Posted by Chris07LB

Intake is coming along. Charles is doing a fine job.

I NEED DETAILS MAN!!

eTiMaGo · 04-12-2007, 08:08 PM

Dammit guys this has gone too far.

I know I've been far too nice and laid-back about this, but I did not want to be some sort of nazi mod who deletes any post with the potential to stir up shit.

But this is too much now... If we can't have any respect for other peoples' work and knowledge, then what's the point of even being a member of this forum.

We're all here for one reason: The Yaris. Whether it's a sedan or liftback, manual or automatic, it's the one reason we come here, right? Now everyone has their own vision for their car, it could be to keep it stock and maximize fuel economy, it could be to turn it into a lightweight, zippy autocross racer, it could be to extract as much acceleration out of it, or turning it to a Fast and Furious-worthy street racer, and so on, or even a little bit of all those. And the great thing is, this car has the potential to be all those things, even if you agree or not. And that's probably the problem, this forum attracts Yaris owners or prospective owners from all walks of life. We have 60-somethings, we have working people who depend on the car as a tool to get them from place to place, we have kids who just want to have the coolest car on the block, and all those visions are important to those people. Sure, it's fun to make jokes of the guy who's done some ricer kinda mods to his car, sure, it may be frustrating to see people so hell-bent on extracting performance out of a car that has not been designed to have much performance in the first place. But so what? If you think you know better, just leave a warning, and leave it at that. When someone doesn't follow your advice and gets burned in some way, then you have all the right to say "I told ya so". A fool and his money are soon parted, I believe the saying goes...

So all this BS hating, let's knock it off. I'm sick of it, I'm sure most others are sick of it even if they don't voice up about it. If I have to be mr badass mod, then so be it.

Now let's get back to the topic at hand, which is one member devoting a lot of time and money to help others with an inexpensive intake solution.

04-10-2007, 12:16 AM	#219
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	This is your last teaser till number one is done!!! Picture 009.jpg Last edited by ChinoCharles; 04-10-2007 at 12:36 AM.

04-10-2007, 04:29 AM	#221
eTiMaGo vroom vroom View User's Garage Drives: lil red 5-door Join Date: Sep 2006 Location: Bangkok, Thailand Posts: 7,744	looks like a high tech bong... multipurpose device, Chino? __________________ The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish. - Robert Jackson Bye bye 1NZ...

04-12-2007, 08:08 PM	#234
eTiMaGo vroom vroom View User's Garage Drives: lil red 5-door Join Date: Sep 2006 Location: Bangkok, Thailand Posts: 7,744	Dammit guys this has gone too far. I know I've been far too nice and laid-back about this, but I did not want to be some sort of nazi mod who deletes any post with the potential to stir up shit. But this is too much now... If we can't have any respect for other peoples' work and knowledge, then what's the point of even being a member of this forum. We're all here for one reason: The Yaris. Whether it's a sedan or liftback, manual or automatic, it's the one reason we come here, right? Now everyone has their own vision for their car, it could be to keep it stock and maximize fuel economy, it could be to turn it into a lightweight, zippy autocross racer, it could be to extract as much acceleration out of it, or turning it to a Fast and Furious-worthy street racer, and so on, or even a little bit of all those. And the great thing is, this car has the potential to be all those things, even if you agree or not. And that's probably the problem, this forum attracts Yaris owners or prospective owners from all walks of life. We have 60-somethings, we have working people who depend on the car as a tool to get them from place to place, we have kids who just want to have the coolest car on the block, and all those visions are important to those people. Sure, it's fun to make jokes of the guy who's done some ricer kinda mods to his car, sure, it may be frustrating to see people so hell-bent on extracting performance out of a car that has not been designed to have much performance in the first place. But so what? If you think you know better, just leave a warning, and leave it at that. When someone doesn't follow your advice and gets burned in some way, then you have all the right to say "I told ya so". A fool and his money are soon parted, I believe the saying goes... So all this BS hating, let's knock it off. I'm sick of it, I'm sure most others are sick of it even if they don't voice up about it. If I have to be mr badass mod, then so be it. Now let's get back to the topic at hand, which is one member devoting a lot of time and money to help others with an inexpensive intake solution. __________________ The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish. - Robert Jackson Bye bye 1NZ...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WR Secret Weapon Intake Dyno Tested..	WRLEO	Performance Modifications	70	05-17-2007 03:00 PM
WR INTAKE SYSTEM : YOU GET $100 FOR DYNO RESULTS !	WRLEO	Sponsors Classifieds Area	0	02-22-2007 10:14 AM
Reviews of Weapon*R Intake system..	WRLEO	Performance Modifications	6	02-20-2007 10:12 PM
intake question and suggestions	Adriaan	Performance Modifications	2	01-31-2007 04:54 PM
Cold Air Intake vs. Short Ram Intake	nevermorez	Performance Modifications	1	01-24-2007 04:25 PM

04-09-2007, 11:44 PM	#217
AlphaFox Drives: 07' Yaris Liftback - silver Join Date: May 2006 Location: Springfield, Mass Posts: 475	did he get you chino?!

04-09-2007, 11:51 PM	#218
spkrman Banned View User's Garage Drives: 1 Join Date: Nov 2006 Location: 2 Posts: 1,476	I hear the dude above is driving this to chino's house right now.

04-10-2007, 11:34 AM	#223
AlphaFox Drives: 07' Yaris Liftback - silver Join Date: May 2006 Location: Springfield, Mass Posts: 475	so........... sick............of.................... waiting......

04-10-2007, 08:49 PM	#225
AlphaFox Drives: 07' Yaris Liftback - silver Join Date: May 2006 Location: Springfield, Mass Posts: 475	ok I have a beer... its not helping. ;)

04-11-2007, 01:46 PM	#229
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	You guys do understand we still need to go through a second design of the MAF plate, get that welded, flare the end of the pipe, paint or powedercoat it, make and weld some mounts, find appropriate hardware... it isn't done.

04-12-2007, 05:35 PM	#231
AlphaFox Drives: 07' Yaris Liftback - silver Join Date: May 2006 Location: Springfield, Mass Posts: 475	wow, this got off track.. can we just stick to talking about the intake now? btw, hows it going charles?

04-12-2007, 05:39 PM	#232
Chris07LB Super Moderator View User's Garage Drives: Yaris Liftback Join Date: Jun 2006 Location: New Jersey Posts: 3,174	Intake is coming along. Charles is doing a fine job.