 |
 |
|
|
07-11-2007, 02:42 PM
|
#19 |
  
Drives: '14 GT86, '08 Vitz Join Date: Dec 2006
Location: Central Valley, CA
Posts: 9,873
|
i didn't need a spring compressor when we installed my S.Tech's.
|
|
|
|
07-11-2007, 03:03 PM
|
#20 | |
|
Drives: 07 Yaris LB Absolute RED Join Date: Apr 2007
Location: Boston, MA
Posts: 884
|
Quote:
|
|
|
|
|
|
07-11-2007, 06:44 PM
|
#21 |
|
|
Yeah taking the stock ones out you will need a compressor but for install you do not need a compressor.
|
|
|
|
|
07-11-2007, 06:49 PM
|
#22 |
|
Lonesome Cowboy
Drives: 2007 WHITE HATCHBACK Join Date: Feb 2007
Location: Inner City, Dallas
Posts: 2,995
|
installed my basics this past weekend no compressor for the rear and didn't even take the wheels off the rear, front needed compressor to get to parts, cut bump stops and cut dust covers front and rear
__________________
SPONSORED BY 
|
|
|
|
|
07-11-2007, 08:49 PM
|
#23 |
|
Super Moderator
|
Re-read my DIY.
Removing stock springs from stock struts - Use a spring compressor.. let's be safe here. Installing new Tanabe's to stock struts - No spring compressor needed. Look at the side by side pictures of the stock .vs. tanabe spring, and you will see why.  Also, for those that wish to follow Tanabe's instructions, cutting the bump stop is also shown in my pictures... and how much to (which part) to reuse. Just a reminder, this DIY was done using Tanabe DF's with stock struts and shocks.. using other springs and or struts and shocks, may require different measurements for cutting, or no cutting at all of your bump stops. ... back to dinner. |
|
|
|
|
07-11-2007, 08:53 PM
|
#24 | |
|
Lonesome Cowboy
Drives: 2007 WHITE HATCHBACK Join Date: Feb 2007
Location: Inner City, Dallas
Posts: 2,995
|
Quote:
__________________
SPONSORED BY
|
|
|
|
|
|
07-11-2007, 11:26 PM
|
#25 |
|
Super Moderator
|
nope, better.
|
|
|
|
|
07-12-2007, 08:58 AM
|
#26 |
Drives: LB-Auto-PWR-ABS-Cruise-Springs Join Date: Aug 2006
Location: Richmond, VA
Posts: 1,065
|
I suggest one of these? Very good for the strut tower bolts so you don't strip them It is also a great tool to have.
http://www.sears.com/sr/javasr/produ...TOOL&ihtoken=1
__________________
Other car is a 2005 Mustang Convertible 4.0L V6 Manual - Legend Lime Get YarAss in gear! RIP - Casey Tatum Last edited by nsmitchell; 07-12-2007 at 09:45 AM. |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Finishing my suspension | ChinoCharles | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 11 | 10-15-2011 09:26 PM |
| question about radio install | misfits9095 | In Car Entertainment + Electronics (audio / video / alarm) | 8 | 06-06-2007 03:08 PM |
| NorCal: Suspension install | The Stig | California | 12 | 06-05-2007 12:51 AM |
| Suspension Setup Question | Ran Kizama | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 27 | 04-28-2007 02:05 PM |
| n00b question... | djfuji | Cosmetic Modifications (Exterior/Interior) | 9 | 01-29-2007 10:47 PM |
Linear Mode
