|
12-20-2009, 05:44 PM | #19 |
Drives: 08 Sedan Join Date: Oct 2008
Location: Tyler, TX
Posts: 899
|
You could look to see if the keyless module box is installed. Most US Yari's do not have the engine immobilizer. I believe most of those go to Canada because it is required by law.
|
12-20-2009, 05:47 PM | #20 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
No blinky LED on the dash and silver ring around the ignition switch (as opposed to black plastic) definitely indicates no immobilizer. Trying the procedure above would be a quick and easy way of verifying that it doesn't have factory remote entry. |
|
12-21-2009, 12:18 AM | #21 |
Drives: 2008 HB Join Date: Dec 2009
Location: SC
Posts: 3
|
I've confirmed both today. A steel key worked. (Though the guy couldn't get both sides of the same key to work. I'll have to find someone more competent.)
I tried the program sequence, but the door locks never cycled. Thanks for the feedback! |
12-23-2009, 03:26 PM | #22 |
I've made a post!
Drives: vitz 2007 Join Date: Dec 2009
Location: male
Posts: 1
|
Hello everyone. I would like to have another remote keyless entry for my vitz imported from japan(Model is DBA-SCP90-AHXNK) (Year 2007) from all the search I did the steps given is to add another keyless entry yaris that have the ignition key, I only have a start button available? The key available is to lock/unclock doors and nothing more? The vitz is equipped with the immobilizer.
Is there a compatible key for this model in the market and what is the programming sequence for it. Any help will be appreciated. Thanks |
12-23-2009, 09:18 PM | #23 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
|
|
01-26-2011, 12:36 AM | #24 |
I'm going to add on to this thread and bump it instead of starting a new one...
Just bought pre-owned 07 Yaris S sedan, auto locks, only one silver key came with car. I followed CTScott's instructions about programming, and got the lock/unlocks in step 9, which led me to believe the cars DOES have keyless enty (would this be a correct assumption?)...so...I do not have any remotes, I do not have the owners manual, so I do not have an FCC ID to reference. What are my chances/options for getting one or two remotes. Slim? Expensive? Dealer only? Thanks in advance for any advice!
__________________
If it aint fixed, don't broke it. |
|
01-26-2011, 08:20 AM | #25 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
If so, then you will be looking for a remote with the FCC ID of MOZRI-20BTY
__________________
|
|
01-28-2011, 01:32 PM | #26 |
Based on this tread;
http://www.yarisworld.com/forums/sho...19&postcount=6 the clicks of locks happened in step 9. I'm not sure why the steps are different than the list posted above, but I assume we are talking about the same step, so yes, I had the 'click of locks'.
__________________
If it aint fixed, don't broke it. |
|
02-18-2011, 07:31 PM | #27 |
Ok, so I finally found and ordered a remote key from Midwest Keyless off of eBay. I emailed the guy to ask about FCC ID, he said it starts with MOZ so this is the correct key (according to the online User's Manual, the FCC ID is MOZB41TG for a key without immobilizer..sound right CTScott?).
The key has arrived, I have done the 'add mode' steps, and get nothing at the end...no confirmation lock/unlock, and no error of 2x lock/unlock...just nothing. And the remote only flashes a red light when I press the button. I also tried the 'rewrite mode' and still nothing. Any suggestions? Thanks!
__________________
If it aint fixed, don't broke it. |
|
02-18-2011, 07:39 PM | #28 | |
Quote:
Thanks!
__________________
If it aint fixed, don't broke it. |
||
02-18-2011, 09:16 PM | #29 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
The programming doesn't have to be done with the remote key.
With the FCC ID. Does it just start with the same 3 characters or do all match? The first three are just the manufacturer ID, so the remaining must match as well for the device to be compatible.
__________________
|
02-19-2011, 02:50 AM | #30 | |
FCC ID
Quote:
"it starts with MOZ. this is the correct one. thanks" Did the FCC ID above look right to you CTScott? As it is different than the ID that you suggested previously in the post...
__________________
If it aint fixed, don't broke it. |
||
02-19-2011, 08:30 AM | #31 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
If there is not a sticker on the back of the remote with the FCC ID, then there may be one inside.
__________________
|
|
02-19-2011, 12:24 PM | #32 |
In the Owner's Manual that I got online from Toyota, it has these three FCC IDs, one in the section of the immobilizer key (which I don't have), and two in the section for the regular key. I thought I had read on here somewhere that one of two was the key and the other was the receiver in the car. The two IDs are MOZB41TG and MOZB21RG. I took the cover off the new key, and the FCC ID is MOZB41TG.
It would appear to be correct, yet I cannot get it to program.... :(
__________________
If it aint fixed, don't broke it. Last edited by Nodrog; 02-19-2011 at 12:27 PM. Reason: added pic |
|
02-19-2011, 02:25 PM | #33 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
__________________
|
|
03-06-2011, 07:56 PM | #34 | |
Quote:
Ok, so if I pull the C pillar what will the receiver look like? And is popping off the C pillar easy? Thanks!
__________________
If it aint fixed, don't broke it. |
||
03-06-2011, 08:56 PM | #35 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
I haven't removed one on a sedan, but it looks like there are 4 clips that hold it on.
__________________
|
|
03-08-2011, 09:20 PM | #36 |
Here are pics of what I found behind the driver's C pillar...I'm going to assume the dangling white plug is what WOULD be connected to the remote receiver, which appears to not be there. Is this a pretty good assumption?
__________________
If it aint fixed, don't broke it. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
can i / where to get factory switch for aftermarket fog lights? and exhaust tip q. | fantabulousbaby | Cosmetic Modifications (Exterior/Interior) | 22 | 08-29-2006 01:13 PM |
DIY KEYLESS ENTRY on Power Liftback? | TC-LIFTBACK | DIY / Maintenance / Service | 0 | 08-23-2006 09:57 AM |
yaris sedan remote trunk relase question pls help soon | fantabulousbaby | New YARIS Purchase Forum | 4 | 08-05-2006 01:26 AM |
Should I add remote key less entry? Options | YotaYarisUSA | General Yaris / Vitz Discussion | 13 | 05-02-2006 05:06 PM |
FS Various OEM keyless Remote | riceboy | Items for Sale by private party | 0 | 04-14-2006 02:42 PM |