Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Second Generation Toyota Yaris Main Rooms > General Yaris / Vitz Discussion
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 11-04-2009, 08:59 PM   #19
bladesmith6
 
Drives: 2007 yaris HB
Join Date: Mar 2006
Location: PA
Posts: 394
oh and i think the rain x wiper works well. I also Aquapel the windshield to give myself a little extra help.
bladesmith6 is offline   Reply With Quote
Old 11-04-2009, 09:11 PM   #20
Lafiro
 
Drives: 06 Yaris Sedan
Join Date: Jun 2006
Location: NYC
Posts: 694
Send a message via AIM to Lafiro
Nice, maybe I will try this after winter, since I dont see the point in buying good wipers now that its getting cold.

BTW, GO YANKEES!!!!!!!!!!!!!!!!!!!!!!!!
Lafiro is offline   Reply With Quote
Old 11-08-2009, 06:28 PM   #21
MadMax
 
MadMax's Avatar
 
Drives: 2008 Yaris Liftback (Sprocket)
Join Date: Oct 2008
Location: San Antonio, Texas!
Posts: 2,799
I just got a set of RainX blades and cut down a 16" one to 14" for my HB. It's on the car at the moment and fits nicely, but it was a real pain in the ass getting the caps back on.

I am letting the glue dry a bit more before I try them out (it's raining as we speak). They do look good, unfortunately it's hard to get good pics but here is my best try...






Cheers! M2

Last edited by MadMax; 02-05-2010 at 05:00 PM. Reason: Fixed the pic links...
MadMax is offline   Reply With Quote
Old 11-08-2009, 07:01 PM   #22
captainm27
 
Drives: 2008 Sedan A/T Silver
Join Date: Nov 2008
Location: New Jersey
Posts: 202
Quote:
Originally Posted by IllusionX View Post
are you sure? because the sedan is tight fit for a 13", you cannot over size to 14...

the LB does take 14 though.
Well, that's what the manual says...and I actually use a 14" on mine and it works perfectly. However, when I go to the auto store and check thier wiper guides, some say 13" and others say 14". So I used the 14 and it's working like a champ.
captainm27 is offline   Reply With Quote
Old 11-09-2009, 03:26 PM   #23
IllusionX
It's the illusion you see
 
Drives: 07 Yaris Sedan Aero
Join Date: Oct 2006
Location: Brossard, QC
Posts: 3,888
mine do not have ANY space left for more than 13".

The reference book do say 14" on some and 13" on others though..
Heck, the reference book even says 24" on the drivers side. but 24" is too small for the sedan. It really needs 26"
IllusionX is offline   Reply With Quote
Old 11-09-2009, 04:06 PM   #24
captainm27
 
Drives: 2008 Sedan A/T Silver
Join Date: Nov 2008
Location: New Jersey
Posts: 202
Quote:
Originally Posted by IllusionX View Post
mine do not have ANY space left for more than 13".

The reference book do say 14" on some and 13" on others though..
Heck, the reference book even says 24" on the drivers side. but 24" is too small for the sedan. It really needs 26"
I also noticed that too...I've seen the 24" on certain reference books...,but it really indeed uses a 26". I wonder where the confusions come from. Could it be a year thing? I have a 2008 Sedan and it uses 14" and 26".
captainm27 is offline   Reply With Quote
Old 11-11-2009, 05:12 PM   #25
Altitude
 
Altitude's Avatar
 
Drives: '08 LB MT Bayou
Join Date: Oct 2008
Location: Colorado
Posts: 1,671
Quote:
Originally Posted by bladesmith6 View Post
Just so everyone is aware you can take apart a the Rain-X Latitude cut them down and re-assemble for the passenger side if you are careful. I got tired of trying to find a uniform pressure blade in the small size "13-14" so I bought a 16" and cut it down, works great.
Thanks for that idea. I've been running the Rain-X for the large blade and oem for the small and it's really been bothering me. This was such an obvious and excellent solution. Worked great by the way!
Altitude is offline   Reply With Quote
Old 11-14-2009, 12:07 PM   #26
IllusionX
It's the illusion you see
 
Drives: 07 Yaris Sedan Aero
Join Date: Oct 2006
Location: Brossard, QC
Posts: 3,888
Quote:
Originally Posted by captainm27 View Post
I also noticed that too...I've seen the 24" on certain reference books...,but it really indeed uses a 26". I wonder where the confusions come from. Could it be a year thing? I have a 2008 Sedan and it uses 14" and 26".
Impossible. The yaris sedan has been been larger since it came out in late 2006.

I don't believe you unless you put a ruler by your wiper and take a picture. lol

I am still using the OEM blades that came with the car... and it is 13", and no extra space to put anything longer...
IllusionX is offline   Reply With Quote
Old 11-14-2009, 10:33 PM   #27
captainm27
 
Drives: 2008 Sedan A/T Silver
Join Date: Nov 2008
Location: New Jersey
Posts: 202
Quote:
Originally Posted by IllusionX View Post
Impossible. The yaris sedan has been been larger since it came out in late 2006.

I don't believe you unless you put a ruler by your wiper and take a picture. lol

I am still using the OEM blades that came with the car... and it is 13", and no extra space to put anything longer...
lol, well, I don't have a ruler with me. But I'll take a picture of it for you. But for now, here's the exact same item on amazon that I bought at Advance Auto Parts, and had one of the employees install it for me. (yeah, I suck at installing wiper blades)

http://www.amazon.com/Trico-Products...8255854&sr=1-5
captainm27 is offline   Reply With Quote
Old 11-16-2009, 10:41 PM   #28
IllusionX
It's the illusion you see
 
Drives: 07 Yaris Sedan Aero
Join Date: Oct 2006
Location: Brossard, QC
Posts: 3,888
I just noticed today my 26" wiper is shorter than my previous 26".
IllusionX is offline   Reply With Quote
Old 11-16-2009, 11:04 PM   #29
captainm27
 
Drives: 2008 Sedan A/T Silver
Join Date: Nov 2008
Location: New Jersey
Posts: 202
Huh....could it be some kind of miss reading on their side? Maybe they claim it's 26", but it's really 25"?
captainm27 is offline   Reply With Quote
Old 11-17-2009, 07:29 PM   #30
IllusionX
It's the illusion you see
 
Drives: 07 Yaris Sedan Aero
Join Date: Oct 2006
Location: Brossard, QC
Posts: 3,888
I can assure you, my next set of wipers will NOT be viewmax wipers from waltmart. I don't like how the driver's side does not make good contact with the glass towards the top of the windshield.

michelin hydro edge wipers go for 15$ a piece at costco, even for the 26".
from the look of them, they can be cut down just like the rain-x. They may even be the exact same wipers.

My viewmax 26" was 20, and the 13 cost 15...
IllusionX is offline   Reply With Quote
Old 11-25-2009, 07:50 PM   #31
Black Yaris
der Zeck
 
Black Yaris's Avatar
 
Drives: '05 Audi A4 1.8t quattro
Join Date: Sep 2006
Location: Toledo, OH
Posts: 5,231
the reason you have some parts store say 13's and others 14's is because the OE size is 350mm (remember this is a Japanese car) which is 13.7795 inches long... so some round up and some round down

as for the drivers side is 650mm or 25.5906 inches... but no one makes a 25 inch blade

The OE blades off of a xD cost me about $50, about the same amount of money as any of the aftermarket replacements

and BTW inserts can be purchased at just about any autoparts store for $4-5 for a pair
__________________
Black Yaris is offline   Reply With Quote
Old 11-26-2009, 02:57 PM   #32
IllusionX
It's the illusion you see
 
Drives: 07 Yaris Sedan Aero
Join Date: Oct 2006
Location: Brossard, QC
Posts: 3,888
it is not.

hatchback takes 24 and 14 while the sedan takes 26 and 13. I don't care about the half an inch sticking in or out, the 2.5cm different is there on the 2 cars.
IllusionX is offline   Reply With Quote
Old 02-12-2010, 10:25 AM   #33
jeff618
 
jeff618's Avatar
 
Drives: Mazda 3
Join Date: Dec 2009
Location: Waterford, WI
Posts: 20
Lightbulb

Why are there so many wiper threads on here??? LOL Ok...I just put this on another string but it totally applies here too...

OK...here's the ticket: As you probably know from reading this string, the Toyota Yaris' 14" passenger side replacement windshield wiper is very hard to find in the newer-style beam blades. The 12" rear is also very hard to find because its a special rear blade that fits the special rear arm.

After exhaustive research, I've only found one aftermarket set-up that works: 'Trico NeoForm Beam Blades' on the front (yes, they have a 14") and 'Trico Exact Fit Rear Integral Blade' on the rear. All of the above come with step-by-step, illustrated removal and replacement instructions - easy install. Got the whole set-up online.

__________________
First Time Caller, Long Time Listener, Great Topic, Love The Show...Thanks For Taking My Call
jeff618 is offline   Reply With Quote
Old 02-12-2010, 12:36 PM   #34
DerFlosser
 
DerFlosser's Avatar
 
Drives: Yaris
Join Date: Apr 2009
Location: USA
Posts: 355
Quote:
Originally Posted by jeff618 View Post
Why are there so many wiper threads on here??? LOL Ok...I just put this on another string but it totally applies here too...

OK...here's the ticket: As you probably know from reading this string, the Toyota Yaris' 14" passenger side replacement windshield wiper is very hard to find in the newer-style beam blades. The 12" rear is also very hard to find because its a special rear blade that fits the special rear arm.

After exhaustive research, I've only found one aftermarket set-up that works: 'Trico NeoForm Beam Blades' on the front (yes, they have a 14") and 'Trico Exact Fit Rear Integral Blade' on the rear. All of the above come with step-by-step, illustrated removal and replacement instructions - easy install. Got the whole set-up online.

Nice avatar.
DerFlosser is offline   Reply With Quote
Old 03-28-2010, 09:58 AM   #35
jeff618
 
jeff618's Avatar
 
Drives: Mazda 3
Join Date: Dec 2009
Location: Waterford, WI
Posts: 20
Arrow Take it if you want it...

Quote:
Originally Posted by jeff618 View Post
Why are there so many wiper threads on here??? LOL Ok...I just put this on another string but it totally applies here too...

OK...here's the ticket: As you probably know from reading this string, the Toyota Yaris' 14" passenger side replacement windshield wiper is very hard to find in the newer-style beam blades. The 12" rear is also very hard to find because its a special rear blade that fits the special rear arm.

After exhaustive research, I've only found one aftermarket set-up that works: 'Trico NeoForm Beam Blades' on the front (yes, they have a 14") and 'Trico Exact Fit Rear Integral Blade' on the rear. All of the above come with step-by-step, illustrated removal and replacement instructions - easy install. Got the whole set-up online.

As a follow-up to my post above, I just got an email from wipers123.com and there's a $15 rebate on NeoForms (including the 14") through 5/15/10. They also sent me an additional $5 instant coupon "springreturningcustomer" (orders over $30) not sure when it expires... I'm not ready to replace mine yet so take it if you want it!

__________________
First Time Caller, Long Time Listener, Great Topic, Love The Show...Thanks For Taking My Call
jeff618 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Wiper blades .... Lafiro General Yaris / Vitz Discussion 81 02-02-2012 06:54 PM
Wiper Blades futdechenes General Yaris / Vitz Discussion 44 06-27-2010 11:08 AM
new pics thebarber Photo-Video-Media Gallery 19 08-27-2009 09:01 PM
What kind of wiper blades? buyah123 DIY / Maintenance / Service 9 11-25-2008 05:25 PM


All times are GMT -4. The time now is 12:22 PM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.