megan header hardware - Toyota Yaris Forums

06yaris06 · 05-05-2010, 01:46 AM

hey everyone,

I just picked up a used megan header and it came with the gasket (in good condition) but no other hardware. I was just wondering if anyone can tell me what i will need and the sizes?...i think i need 3 studs for the part that connects to the mid-pipe (size unknown?)..as well as a donut gasket for that same section? and lastly i think i need 5 bolts that connect the header to the engine because the stock ones will be too short? (again the size of those i also dont know?).

so if anyone can tell me what exactly it is that i will need and their sizes for the install it would be much appreciated. If i am way off please dont hesitate to tell me and point me in the right direction lol!. Thank you very much in advance for any input!

aucorium · 05-05-2010, 01:58 AM

hey buddy

the megan header is suppose to be bolt on , i know there is suppose to be a few goodies in the box , just run a search on the forum , there are quite a few posts on this topic , hope it helps :-)

Bluevitz-rs · 05-05-2010, 08:43 AM

If you're careful you can get the old donut off the stock exhaust. And you should be able to use all the existing hardware that already holding the manifold on.

thebarber · 05-05-2010, 11:28 AM

i just swapped the header in my 07 last month

since you own an 06, your's will likley be like mine and half destroyed

i reused all the oem bolts/nuts to install the header, so all you need is the donut gasket and the gasket at the block (which it sounds like you already have)

good luck!

06yaris06 · 05-05-2010, 12:47 PM

sweet sounds good..thanks alot guys its very much appreciated! i will probably be doing it either thursday or friday ill keep you guys posted ..and barber also thank you for the rim refinishing tips a while back it went very well and they looked great :D

WeeYari · 05-05-2010, 12:51 PM

Quote:

Originally Posted by 06yaris06

it went very well and they looked great :D

Post up pics!

06yaris06 · 05-05-2010, 12:57 PM

i wouldve and shouldve but i refinished them so i could sell them lol and they sold right away...they were 17's and just too heavy for me. killlled my mileage :( lol...

thebarber · 05-05-2010, 01:33 PM

glad i can/could help

05-05-2010, 01:46 AM	#1
06yaris06 View User's Garage Drives: 2006 Yaris (Red) Join Date: Oct 2008 Location: Toronto Posts: 28	megan header hardware hey everyone, I just picked up a used megan header and it came with the gasket (in good condition) but no other hardware. I was just wondering if anyone can tell me what i will need and the sizes?...i think i need 3 studs for the part that connects to the mid-pipe (size unknown?)..as well as a donut gasket for that same section? and lastly i think i need 5 bolts that connect the header to the engine because the stock ones will be too short? (again the size of those i also dont know?). so if anyone can tell me what exactly it is that i will need and their sizes for the install it would be much appreciated. If i am way off please dont hesitate to tell me and point me in the right direction lol!. Thank you very much in advance for any input!

05-05-2010, 01:58 AM	#2
aucorium AKA Samurai Racer Drives: Yaris 2006 Join Date: Jul 2006 Location: South Africa Posts: 834	hey buddy the megan header is suppose to be bolt on , i know there is suppose to be a few goodies in the box , just run a search on the forum , there are quite a few posts on this topic , hope it helps :-) __________________ JDMtuner Import Performance Tuning www.jdmtuner.co.za

05-05-2010, 11:28 AM	#4
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	i just swapped the header in my 07 last month since you own an 06, your's will likley be like mine and half destroyed i reused all the oem bolts/nuts to install the header, so all you need is the donut gasket and the gasket at the block (which it sounds like you already have) good luck! __________________

05-05-2010, 01:33 PM	#8
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	glad i can/could help __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Megan Racing header install and review with pics.	Herbicidal	Performance Modifications	6	09-03-2009 08:40 AM
Pre Hack Revival: Megan Racing Header vs Ebay Header	Sabretooth	Performance Modifications	15	08-19-2009 05:26 PM
FS: Megan Racing Exhaust n Header.	Sabretooth	Items for Sale by private party	6	05-17-2009 05:04 PM
FS: Megan Header -- BNIB -- Socal	03Z33	Items for Sale by private party	11	11-23-2008 01:59 AM
Megan Header Advice	jamal1984	Cosmetic Modifications (Exterior/Interior)	1	02-20-2007 07:22 PM

05-05-2010, 08:43 AM	#3
Bluevitz-rs 1NZ-6spd View User's Garage Drives: '05 6-Spd Vitz RS Join Date: Oct 2008 Location: Oshawa, Ontario, Canada Posts: 2,967	If you're careful you can get the old donut off the stock exhaust. And you should be able to use all the existing hardware that already holding the manifold on.

05-05-2010, 12:47 PM	#5
06yaris06 View User's Garage Drives: 2006 Yaris (Red) Join Date: Oct 2008 Location: Toronto Posts: 28	sweet sounds good..thanks alot guys its very much appreciated! i will probably be doing it either thursday or friday ill keep you guys posted ..and barber also thank you for the rim refinishing tips a while back it went very well and they looked great :D

05-05-2010, 12:57 PM	#7
06yaris06 View User's Garage Drives: 2006 Yaris (Red) Join Date: Oct 2008 Location: Toronto Posts: 28	i wouldve and shouldve but i refinished them so i could sell them lol and they sold right away...they were 17's and just too heavy for me. killlled my mileage :( lol...