anyone with blitz super and CAI AEM help please - Toyota Yaris Forums

vten · 05-09-2012, 10:11 AM

im having a problem with my supercharger install on the idling ...trying to source the problem....my installer cut off a piece of my AEM CAI ...to fit onto the blitz ...since it's from the xb ...

would this be the culprit ??

on idling , it seems like my car doesnt have enough air for the engine and died on every stops ...

per my aem manual ...that spout is suppose to go to the crank case breather hose

help guys

CTScott · 05-09-2012, 10:54 AM

As long as he plugged the nipple on the crank case you are OK with that bypassed (it is really an emissions thing).

The idling issue when running a F/IC is typically caused by having too short of an injector response time (which is a parameter in the F/IC system settings).

Schizoprenia · 05-09-2012, 11:32 AM

i think you are facing problems with diameter of the intake piping, would the XB be different? the yaris MAF sensor will sit only on 2.25" pipe, centered at the manner of the stock airbox position of the sensor. if XB uses a 2.5" pipe intake, dont think it would work...

vten · 05-09-2012, 02:15 PM

I have pictures for all the hoses .... I'll post it once I get home ...
Quite irritated at this moment ...

vten · 05-10-2012, 09:20 AM

here's the hoses pics

05-09-2012, 10:54 AM	#2
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,460	As long as he plugged the nipple on the crank case you are OK with that bypassed (it is really an emissions thing). The idling issue when running a F/IC is typically caused by having too short of an injector response time (which is a parameter in the F/IC system settings). __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Tires and CAI	psychopinay42	Items for Sale by private party	4	05-04-2009 07:45 PM
AEM Intake JUST INSTALLED	falkor_99	Performance Modifications	28	11-07-2008 08:55 PM

05-09-2012, 11:32 AM	#3
Schizoprenia Drives: Toyota Yaris 1.5 M/T '06 Join Date: Oct 2009 Location: Surabaya, Indonesia Posts: 24	i think you are facing problems with diameter of the intake piping, would the XB be different? the yaris MAF sensor will sit only on 2.25" pipe, centered at the manner of the stock airbox position of the sensor. if XB uses a 2.5" pipe intake, dont think it would work...

05-09-2012, 02:15 PM	#4
vten Drives: red bare bone yaris hb 3dr Join Date: May 2009 Location: columbus Posts: 1,022	I have pictures for all the hoses .... I'll post it once I get home ... Quite irritated at this moment ...