DIY Cruise Control FAQ (2006-2010 Yaris) - Page 20 - Toyota Yaris Forums

FIREPROOF5 · 01-23-2013, 10:32 AM

cant i over ride this and just connect the wires from CC stalk directly to ecm

FIREPROOF5 · 01-23-2013, 10:34 AM

cant we connect the CC stalk wires (in ur blog) blue and brown directly to ECM after all the clips in between are also doing the same i.e sending electric signals

CTScott · 01-23-2013, 11:29 AM

Quote:

Originally Posted by FIREPROOF5

cant we connect the CC stalk wires (in ur blog) blue and brown directly to ECM after all the clips in between are also doing the same i.e sending electric signals

Since the car is built with a spiral cable that does not have enough wires to support cruise control, it is unlikely that the ECM is programmed for it.

In doing a bit more research on the Axio Fielder, the ones with the same engine as the Yaris (1NZ-FE) do not support cruise control, but the ones with the 2ZR-FE engine do.

adamcorey23 · 01-26-2013, 11:32 AM

I have a 2011 Yaris 5 speed MT, No power , Can i still do the cruise control

CTScott · 01-26-2013, 03:09 PM

Quote:

Originally Posted by adamcorey23

I have a 2011 Yaris 5 speed MT, No power , Can i still do the cruise control

Yes you can. You will just need to do an extra piece (adding the connector D3 pins and running the wire from them to the ECM connector).

exidus · 06-23-2013, 08:32 PM

Dear Scott,

First of all received your wires 2 weeks ago and as I was out of state was only able to install everything yesterday. My car being a Thailand build Camry 2.0 was quite tight under the dashboard. It works like a charm.I am now happily crusing on my Malaysian highways.

Thanks a million Scott for all the info I needed to make this happen....

MickZEL · 07-05-2013, 11:22 AM

Guys have a question. And if the connector D3 are already brown and blue wires?

MickZEL · 07-08-2013, 07:29 AM

Does not work, what to do?

Jadijkstra2000 · 07-13-2013, 05:00 PM

Will this be possible on european toyota yaris 2010?

Jadijkstra2000 · 07-14-2013, 08:10 AM

Hmmmm got 89661-0dd90... No idea if it supports cc....

MickZEL · 07-22-2013, 01:27 PM

On European it doesn't work.
Everything works for me. I not correctly tried to include

07liftback · 07-26-2013, 11:04 PM

Doesn't cruise control usually consume more gas than without it? I would probably start falling asleep if I had it on for too long

jose3sgte · 07-30-2013, 12:43 AM

First of all thank you CT Scott for such helpful guide, I did it to my 06 PR spec Yaris and its been working like a charm for 6 months, I just have a question, Can I use a US S spec cluster (2010) to have the indicators working? I just ordered one from ebay.

CTScott · 07-30-2013, 06:01 AM

Quote:

Originally Posted by jose3sgte

First of all thank you CT Scott for such helpful guide, I did it to my 06 PR spec Yaris and its been working like a charm for 6 months, I just have a question, Can I use a US S spec cluster (2010) to have the indicators working? I just ordered one from ebay.

Unfortunately the indicator will not work unless you also upgrade the ECM to a 2009 or newer one as well.

I offer an indicator module, which can be used with 06-08 Yaris, which lack the cluster indicator. See my cruise control DIY below for more info on it.

jose3sgte · 07-30-2013, 07:50 AM

Is the ecu plug n play? Or I have to look for one in particular? (US or PR spec), Thanks

CTScott · 07-30-2013, 08:02 AM

Quote:

Originally Posted by jose3sgte

Is the ecu plug n play? Or I have to look for one in particular? (US or PR spec), Thanks

It is plug and play if it is properly matched. You would need a PR spec one. You would also have to match the car's features - Transmission type, engine immobilizer or not, ABS, Traction control, etc.

Bammer · 08-12-2013, 09:26 PM

Clear, concise instructions. Close-up pics. Couldn't have completed the job without this info.

Thank-you.

YarisBasic · 08-18-2013, 10:07 AM

is anyone know, will the Rostra cc kit work on Australia model (2007) manual sedan,

Thank

Lewis

07-05-2013, 11:22 AM	#349
MickZEL Drives: Yaris sedan Join Date: Apr 2011 Location: Russia,Moscow Posts: 246	Guys have a question. And if the connector D3 are already brown and blue wires? __________________ I like very much travel

07-08-2013, 07:29 AM	#350
MickZEL Drives: Yaris sedan Join Date: Apr 2011 Location: Russia,Moscow Posts: 246	Does not work, what to do? __________________ I like very much travel

07-22-2013, 01:27 PM	#353
MickZEL Drives: Yaris sedan Join Date: Apr 2011 Location: Russia,Moscow Posts: 246	On European it doesn't work. Everything works for me. I not correctly tried to include __________________ I like very much travel

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 07:50 AM
Cruise Control	chessclubloser	DIY / Maintenance / Service	11	03-27-2010 11:59 AM
2007 Yaris Pricing Info !	YarisBueller	New YARIS Purchase Forum	104	06-24-2009 04:54 PM
Using Cruise control	Driver	General Yaris / Vitz Discussion	14	11-09-2006 10:12 PM

01-23-2013, 10:32 AM	#343
FIREPROOF5 Drives: TOYOTA AXIO FIELDER 07 Join Date: Jan 2013 Location: PAKISTAN Posts: 3	cant i over ride this and just connect the wires from CC stalk directly to ecm

01-23-2013, 10:34 AM	#344
FIREPROOF5 Drives: TOYOTA AXIO FIELDER 07 Join Date: Jan 2013 Location: PAKISTAN Posts: 3	cant we connect the CC stalk wires (in ur blog) blue and brown directly to ECM after all the clips in between are also doing the same i.e sending electric signals

01-26-2013, 11:32 AM	#346
adamcorey23 I've made a post! Drives: 2011 Yaris S Join Date: Jan 2013 Location: Ironton, Oh Posts: 1	I have a 2011 Yaris 5 speed MT, No power , Can i still do the cruise control

06-23-2013, 08:32 PM	#348
exidus Drives: toyota Join Date: May 2013 Location: kuala lumpur Posts: 2	Dear Scott, First of all received your wires 2 weeks ago and as I was out of state was only able to install everything yesterday. My car being a Thailand build Camry 2.0 was quite tight under the dashboard. It works like a charm.I am now happily crusing on my Malaysian highways. Thanks a million Scott for all the info I needed to make this happen....

07-13-2013, 05:00 PM	#351
Jadijkstra2000 Drives: Toyota Yaris 2010 Join Date: Jul 2013 Location: Netherlands Posts: 8	Will this be possible on european toyota yaris 2010?

07-14-2013, 08:10 AM	#352
Jadijkstra2000 Drives: Toyota Yaris 2010 Join Date: Jul 2013 Location: Netherlands Posts: 8	Hmmmm got 89661-0dd90... No idea if it supports cc....

07-26-2013, 11:04 PM	#354
07liftback Drives: 07 Yaris Liftback Join Date: Nov 2010 Location: Bay Area Posts: 147	Doesn't cruise control usually consume more gas than without it? I would probably start falling asleep if I had it on for too long

07-30-2013, 12:43 AM	#355
jose3sgte Drives: Yaris Hatch,Celi 3SGTE,GC8 Join Date: Apr 2006 Location: Puerto Rico Posts: 8	First of all thank you CT Scott for such helpful guide, I did it to my 06 PR spec Yaris and its been working like a charm for 6 months, I just have a question, Can I use a US S spec cluster (2010) to have the indicators working? I just ordered one from ebay.

07-30-2013, 07:50 AM	#357
jose3sgte Drives: Yaris Hatch,Celi 3SGTE,GC8 Join Date: Apr 2006 Location: Puerto Rico Posts: 8	Is the ecu plug n play? Or I have to look for one in particular? (US or PR spec), Thanks

08-12-2013, 09:26 PM	#359
Bammer I've made a post! Drives: Yaris Join Date: Aug 2013 Location: Ontario Posts: 1	Clear, concise instructions. Close-up pics. Couldn't have completed the job without this info. Thank-you.

08-18-2013, 10:07 AM	#360
YarisBasic Drives: YRX Black 4 doors seden Join Date: May 2011 Location: Western Australia Posts: 7	is anyone know, will the Rostra cc kit work on Australia model (2007) manual sedan, Thank Lewis