Cruise control install 2009 Yaris 3 door

[dbielawski]

Originally Posted by CTScott

I was about to say that you need to get your eyes examined in regards to the 2 vs 3 pins on D3, but then I took a look and noticed that on my 08 there are indeed only 2 pins on the clockspring side of that connector.

The other pin for the cruise control is ground. You can simply tie the other wire to the frame of the steering wheel, since it is a chassis ground.

Ok...now what? Mechanic grounded the cruise stalk. When cruise stalk pushed to activate, the ABS, parking brake and PS lights came on but cruise still not working!!!

Any suggestions. Thanks!