Update: A little more damage found (CTScott, could use your knowledge here). - Page 2 - Toyota Yaris Forums

SilverBack · 09-28-2011, 10:48 PM

That's what I was thinking too, but I just wanted make sure I was making the best decision. Thanks again!

fnkngrv · 09-29-2011, 11:32 AM

I might have mine still...the plastic piece anyway. We removed a bunch of the plastic parts and didn't put them back on during my turbo install.

SilverBack · 09-29-2011, 04:13 PM

I'm just gonna get the replacement bolts and see if the one I already have still holds tight. If not, I'll PM you an offer.

SilverBack · 10-16-2011, 02:47 AM

Turns out it was even more damaged than I thought, so I had to replaced it completely. The deal was that there were mounting stakes at the bottom end that got sheared-off clean, which meant a total part replacement with mounting buttons was in order. Anyways, I got the parts today and got the job done in under 20 minutes. Good as new

09-28-2011, 10:48 PM	#19
SilverBack Joey View User's Garage Drives: '14 Scion xD 5-speed Join Date: Oct 2008 Location: El Monte, Ca Posts: 3,529	That's what I was thinking too, but I just wanted make sure I was making the best decision. Thanks again! __________________ Formerly owned Met-Met. '07 Yaris LB 5-speed. A forum post should be like a skirt: Long enough to cover the subject but short enough to keep things interesting. "I don't have an anger problem. I have an idiot problem." -Hank Hill

09-29-2011, 11:32 AM	#20
fnkngrv Mr. 155 and climbing View User's Garage Drives: Seriously Modded 07 Sedan Join Date: Jun 2006 Location: In The Hotbox Posts: 4,742	I might have mine still...the plastic piece anyway. We removed a bunch of the plastic parts and didn't put them back on during my turbo install. __________________ Team Tiamat Racing on Facebook Youtube Channel: Team Tiamat Racing *Class record holder in Land Speed @ 154.5mph for 1.5 mile and 145.5mph in the mile in the F (2.016 to 3.014 L), G (1.524 to 2.015 L), and H (1.016 to 1.523 L) classes.*

09-29-2011, 04:13 PM	#21
SilverBack Joey View User's Garage Drives: '14 Scion xD 5-speed Join Date: Oct 2008 Location: El Monte, Ca Posts: 3,529	I'm just gonna get the replacement bolts and see if the one I already have still holds tight. If not, I'll PM you an offer. __________________ Formerly owned Met-Met. '07 Yaris LB 5-speed. A forum post should be like a skirt: Long enough to cover the subject but short enough to keep things interesting. "I don't have an anger problem. I have an idiot problem." -Hank Hill

10-16-2011, 02:47 AM	#22
SilverBack Joey View User's Garage Drives: '14 Scion xD 5-speed Join Date: Oct 2008 Location: El Monte, Ca Posts: 3,529	Turns out it was even more damaged than I thought, so I had to replaced it completely. The deal was that there were mounting stakes at the bottom end that got sheared-off clean, which meant a total part replacement with mounting buttons was in order. Anyways, I got the parts today and got the job done in under 20 minutes. Good as new __________________ Formerly owned Met-Met. '07 Yaris LB 5-speed. A forum post should be like a skirt: Long enough to cover the subject but short enough to keep things interesting. "I don't have an anger problem. I have an idiot problem." -Hank Hill