Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > Wash, Wax, Detailing, Exterior Repairs
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 04-24-2016, 06:32 PM   #1
area man
Newbie
 
Drives: 2014 Yaris SE
Join Date: May 2015
Location: MI
Posts: 2
Cleaning behind tail lights on 2014 hatchback/SE?

Anyone with experience removing the tail light assemblies on a hatchback? I unbolted them from inside the trunk but I can't get them to pop out. It looks like there is a clip that goes behind the bumper.

Do I need to remove bumper to get these things out? Rain is washing dirt behind them and it is build up around the lens.

I think this picture from ebay is of what I'm dealing with.

area man is offline   Reply With Quote
Old 10-20-2016, 02:43 PM   #2
connern
I've made a post!
 
Drives: 2008 Yaris RS 4dr
Join Date: Aug 2013
Location: Canada
Posts: 1
Shouldn't be an issue.. there's 2 10mm bolts inside the little vent looking plats inside the hatch

Once you undo those two bolts, use something soft and rigid to wedge into the gap between the light housing and body on the exterior of the car, and just sort of push from the inside, and pull from the outside (you look like you're hugging your cars tailight when doing this) and they pop right out
connern is offline   Reply With Quote
Old 10-20-2016, 05:05 PM   #3
thebarber
daily driver
 
thebarber's Avatar
 
Drives: 04 echo RS
Join Date: Jun 2006
Location: Grand Rapids, MI
Posts: 5,693
might just have to herc them out of there...
__________________
thebarber is offline   Reply With Quote
Old 11-01-2016, 12:24 PM   #4
snowsquirrel
 
Drives: 2008 Yaris 5dr LB
Join Date: Aug 2016
Location: Waterloo, Ontario
Posts: 48
Tail Light Removal

Well, the driver side brake light blown, so need to replace the bulb 7443, the tail assembly came out only after some persuasion, found out it was due to rusted locating pin, so cleaned it and applied appropriate lub, hopefully won't attack the plastic part attached to the body.

When I worked on the right side assembly, it wouldn't budge, so I gave it a good yank, it came off, but oh-uh, the pin broke off! So the JB Weld to the rescue, not pretty but it's hidden from view.

So be careful when other members doing this operation, it may not come out easily for some, if the pin rusts or it wouldn't release smoothly.
Attached Images
File Type: jpg IMG_1339.jpg (66.5 KB, 33 views)
File Type: jpg IMG_1336.jpg (74.5 KB, 33 views)
File Type: jpg IMG_1340.jpg (72.2 KB, 33 views)
File Type: jpg IMG_1337.jpg (92.7 KB, 33 views)
File Type: jpg IMG_1338.jpg (72.1 KB, 33 views)
snowsquirrel is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
3rd Gen Vitz RS (and G's) Tail Lights: Part Numbers, Ordering, and Installation keiri Third Gen Yaris General Discussion 23 05-09-2017 07:45 PM
Free Projectors or LED tails for 1 Yaris 4d + 1 Yaris 2d in SoCal V70R_Blackbrick Cosmetic Modifications (Exterior/Interior) 26 11-27-2013 11:14 PM
LED tail lights installed Cutie Pie #2 Cosmetic Modifications (Exterior/Interior) 10 08-20-2012 11:25 PM
Tail lights for 09 sedan piepie Cosmetic Modifications (Exterior/Interior) 7 06-03-2009 09:24 AM


All times are GMT -4. The time now is 03:13 AM.




YarisWorld
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.