|
03-06-2016, 04:29 PM | #1 |
Drives: '08 2zr swapped Vios M/T Join Date: Oct 2012
Location: Caledonia Ont.
Posts: 2,938
|
Security Kill Switch
I'm going to be rigging up a kill switch (possibly 2) fpor extra piece of mind when my car is left in a public parking lot all day while I'm in class. I don't want the ECU to reset when the kill switch is activated. Therefore I will be adding a kill switch to the ignition and another to the fuel pump power.
I am thinking of just wiring up a basic switch in line with the wire that delivers power. This way when the switch is off(open) it cuts the power to either the ignition or the fuel pump. When I flick the switch on (closed) everything will work as expected. I obviously will be hiding these 2 switched in places only I know about. Will wiring the switches up this was work for my purpose I intend? I don't want anything special to happen so i don't believe I'll need a relay or fuse. Can someone please supply me with that wires I can attached the switches to so that my kill switches work as planned. As stated above I'll be cutting the ignition and the fuel pump. Thanks
__________________
No one ever wants to give a Yaris the point by... |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY - Headlights off with the Ignition Switch | CTScott | DIY / Maintenance / Service | 46 | 11-03-2018 08:42 PM |
Clutch safety switch wire description. Kill switch? Add on? | valchrist90731 | DIY / Maintenance / Service | 2 | 08-03-2015 09:04 PM |
Replacement Map Light Switch? | Meteorite_Marty | Cosmetic Modifications (Exterior/Interior) | 8 | 11-12-2013 10:18 PM |
Ignition Kill switch? | Deathegg | DIY / Maintenance / Service | 6 | 07-05-2011 07:17 AM |