Wiper Blades

[david_827]

Is there anyway to reposition the wiper blades?

For some reason the longer wiper blade on my sedan ends up getting stuck under the arm of the shorter one, then when i start the wiper blades the longer one ends up getting mangled. This has happened to me about 4 or 5 times over the last year and some change

i'll try to take a pic tonight to show you what i mean.
BTW i am using the Toyota OEM wiper blades.

[WeeYari]

-Pop the plastic cap off of the wiper arm mounting point.

-Undo retaining nut that will be reveiled.

-Lift off wiper arm and reposition it a couple of degrees.

-Tighten down nut.

-Replace plastic cover.

Make sure you have the wiper arm lifted to full upright while working with the nut.

[david_827]

Originally Posted by WeeYari

-Pop the plastic cap off of the wiper arm mounting point.

-Undo retaining nut that will be reveiled.

-Lift off wiper arm and reposition it a couple of degrees.

-Tighten down nut.

-Replace plastic cover.

Make sure you have the wiper arm lifted to full upright while working with the nut.

Thanks! i will try this.