Blitz S/C a rebuilt and rebaged Toyota S/C? - Toyota Yaris Forums

Yaris0609 · 03-12-2010, 01:30 PM

I picked up an SC14 from a toyota Previa, and when looking at the Blitz S/C kits on member's Yarii, I noticed some similarities between the two.

This first picture tells it all. It looks like Blitz removed the pulley, made an extension with bearings, and cast a new intake manifold that bolts directly to the output of the supercharger.

The SC12 and the SC14 are both roots type blowers. Check this thread....
http://www.microimageonline.com/foru...win-screw.html

After seeing this last picture, I am betting its an SC14. 6 bolt intake pipe, 5 bolt (in rectangle shape) boost pipe.

So those of you with a Blitz S/C kit are really rocking Toyota Parts!!

Specs: Stock MR2 with SC12 1.6L 143Hp 140 FT LBs 8.1 C/R
Previa S/C with SC14 2.4L 158Hp 190 Ft lbs 8.9 C/R

I will partially dismantle my SC14 and take pics here shortly.

Yaris0609 · 03-12-2010, 04:00 PM

its close but no cigar.

they might have modified the casting to have 6 bolt on top and 6 bolt on bottom. the previa intake tube has a bypass in it, and that is why it is 5 bolts. the tube goes over the s/c. the ecu controls the activation of the S/C in a similar way the 2zzge ecu controls lift, based on throttle position and engine load.

If i had a junked blitz im sure i could get it to work on a yaris with the s/c14.

Heres some measurement pics

blacksandiegovitz · 03-12-2010, 04:20 PM

Interesting reserch and good pictures too , So what are your plans with this ???

Yaris0609 · 03-13-2010, 12:21 AM

well nothing really. I can't afford nor justify the means of a $3500 s/c kit. Plus I am absolutely obsessed with only putting Toyota parts on my Yaris.

There might be people wondering what kind of S/C this is, or you might find a trashed s/c, and be able to replace it with an SC14, or you could make your own kit. I paid 60 bucks for this out of the junkyard, and its in pretty decent shape. with a little fab work and a belt, this could be an easy diy, you would just need a fuel controller and clutch controller, and obviously a smaller pulley...

03-12-2010, 01:30 PM	#1
Yaris0609 Drives: 09 Yaris 3 DR HB Join Date: Jun 2009 Location: Tucson, AZ Posts: 49	Blitz S/C a rebuilt and rebaged Toyota S/C? I picked up an SC14 from a toyota Previa, and when looking at the Blitz S/C kits on member's Yarii, I noticed some similarities between the two. This first picture tells it all. It looks like Blitz removed the pulley, made an extension with bearings, and cast a new intake manifold that bolts directly to the output of the supercharger. The SC12 and the SC14 are both roots type blowers. Check this thread.... http://www.microimageonline.com/foru...win-screw.html After seeing this last picture, I am betting its an SC14. 6 bolt intake pipe, 5 bolt (in rectangle shape) boost pipe. So those of you with a Blitz S/C kit are really rocking Toyota Parts!! Specs: Stock MR2 with SC12 1.6L 143Hp 140 FT LBs 8.1 C/R Previa S/C with SC14 2.4L 158Hp 190 Ft lbs 8.9 C/R I will partially dismantle my SC14 and take pics here shortly.

03-12-2010, 04:20 PM	#3
blacksandiegovitz Your mom goes to college View User's Garage Drives: 08 Vitz Join Date: Oct 2008 Location: Just chillin' out brah ! Posts: 1,434	Interesting reserch and good pictures too , So what are your plans with this ??? __________________ Garm is permanently high because he is the king of smokin' deals!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-12-2010, 04:00 PM	#2
Yaris0609 Drives: 09 Yaris 3 DR HB Join Date: Jun 2009 Location: Tucson, AZ Posts: 49	its close but no cigar. they might have modified the casting to have 6 bolt on top and 6 bolt on bottom. the previa intake tube has a bypass in it, and that is why it is 5 bolts. the tube goes over the s/c. the ecu controls the activation of the S/C in a similar way the 2zzge ecu controls lift, based on throttle position and engine load. If i had a junked blitz im sure i could get it to work on a yaris with the s/c14. Heres some measurement pics

03-13-2010, 12:21 AM	#4
Yaris0609 Drives: 09 Yaris 3 DR HB Join Date: Jun 2009 Location: Tucson, AZ Posts: 49	well nothing really. I can't afford nor justify the means of a $3500 s/c kit. Plus I am absolutely obsessed with only putting Toyota parts on my Yaris. There might be people wondering what kind of S/C this is, or you might find a trashed s/c, and be able to replace it with an SC14, or you could make your own kit. I paid 60 bucks for this out of the junkyard, and its in pretty decent shape. with a little fab work and a belt, this could be an easy diy, you would just need a fuel controller and clutch controller, and obviously a smaller pulley...