Blitz install has begun!! - Toyota Yaris Forums

wildmongoose26 · 03-20-2013, 03:14 PM

Picked up a used kit for a screaming deal local. Came off a yaris so shouldn't be any issues with the TB fitment. Do need to find the right spacers and make some new gaskets but other then that all set to go

Finished the wiring last night and doing the rest of the instsll Saturday. Just have to wire up the wideband and boost gauge between now and then.

Oh, and have a bit if super JDM rareness on the way. So much so I've only ever found one car sporting it, abs that car lives in Japan

Yarflana · 03-20-2013, 03:23 PM

In terms of difficulty, how hard is putting a Blitz on the car? Can it be done in one dedicated day with all the right parts and tools available? Is it worth it? What does it really do?

hw6515 · 03-20-2013, 03:52 PM

thebarber · 03-20-2013, 03:53 PM

Can be done in a day with all the right parts.

When I did mine, I installed the s/c in one evening and the piggyback about a week and a half later

wildmongoose26 · 03-20-2013, 04:12 PM

Well it's just wiring right now. No pics. The wiring was about 2 hours making aure I had it all correct. The rest I'm not sure of yet. Hoping its a day install

As far as the rare JDZm piece... No pics for u

vten · 03-20-2013, 07:57 PM

U will like the extra power Brent !

TOLMACH · 03-20-2013, 09:41 PM

Quote:

Originally Posted by wildmongoose26

Picked up a used kit for a screaming deal local. Came off a yaris so shouldn't be any issues with the TB fitment. Do need to find the right spacers and make some new gaskets but other then that all set to go

Finished the wiring last night and doing the rest of the instsll Saturday. Just have to wire up the wideband and boost gauge between now and then.

Oh, and have a bit if super JDM rareness on the way. So much so I've only ever found one car sporting it, abs that car lives in Japan

I just did the mechanical part on mine. Common issues seem to be air leaks - hence I used gasket maker stuff as all my gaskets are not new and that notorius center nut on the SC manifold. What I did: I measured the stud - how deep it goes inside and then created a bolt by combining the stud and the nut and left it @stuck@ in the manifold- was pretty easy to install the manifold later (studs on the side do a good centering job).

Good luck with your project

03-20-2013, 03:14 PM	#1
wildmongoose26 Drives: 09 5dr Yaris Join Date: Mar 2009 Location: Dallas, TX Posts: 443	Blitz install has begun!! Picked up a used kit for a screaming deal local. Came off a yaris so shouldn't be any issues with the TB fitment. Do need to find the right spacers and make some new gaskets but other then that all set to go Finished the wiring last night and doing the rest of the instsll Saturday. Just have to wire up the wideband and boost gauge between now and then. Oh, and have a bit if super JDM rareness on the way. So much so I've only ever found one car sporting it, abs that car lives in Japan

03-20-2013, 03:53 PM	#4
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	Can be done in a day with all the right parts. When I did mine, I installed the s/c in one evening and the piggyback about a week and a half later __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Compilation of Yaris How-tos/DIYs	YarisBueller	DIY / Maintenance / Service	39	04-28-2018 08:47 AM
Yet another Blitz Supercharger Install	CTScott	DIY / Maintenance / Service	80	05-09-2013 08:18 PM
Blitz install questions	47_MasoN_47	Forced Induction Forum	53	10-03-2012 09:29 AM
Blitz SuperCharger Install	PETERPOOP	Forced Induction Forum	127	09-23-2010 01:25 AM
an other blitz install thanks to Garm	s3r3nity	Forced Induction Forum	18	05-13-2009 09:35 AM

03-20-2013, 03:23 PM	#2
Yarflana View User's Garage Drives: 2008 Base Model Join Date: Jan 2013 Location: TX Posts: 255	In terms of difficulty, how hard is putting a Blitz on the car? Can it be done in one dedicated day with all the right parts and tools available? Is it worth it? What does it really do?

03-20-2013, 03:52 PM	#3
hw6515 Drives: 08 Yaris AT, 350Z GT MT Join Date: Feb 2013 Location: U.S Posts: 70

03-20-2013, 04:12 PM	#5
wildmongoose26 Drives: 09 5dr Yaris Join Date: Mar 2009 Location: Dallas, TX Posts: 443	Well it's just wiring right now. No pics. The wiring was about 2 hours making aure I had it all correct. The rest I'm not sure of yet. Hoping its a day install As far as the rare JDZm piece... No pics for u

03-20-2013, 07:57 PM	#6
vten Drives: red bare bone yaris hb 3dr Join Date: May 2009 Location: columbus Posts: 1,022	U will like the extra power Brent !