Dropping the tansmission? - Page 2 - Toyota Yaris Forums

Bluevitz-rs · 03-17-2014, 04:01 PM

You'll probably notice a lot more driveline vibration, but less free play from on throttle to off throttle.

Golddeenoh · 03-17-2014, 05:20 PM

it is definitely different. improved rev response, better grip from the clutch. weird to let out on, it has free travel until the top 75% of the peddle movement, then it starts to grab and is completely engaged by 80% travel. it lets out like a Honda, kind of weird. It will take some getting used to.

Bluevitz-rs · 03-17-2014, 07:03 PM

You can adjust all aspects of the clutch travel by adjusting the pushrod from the pedal to the master cylinder. Just loosen the rod back a bit then adjust the top out stopper to take up the slack.

Golddeenoh · 03-18-2014, 08:30 PM

the slack eased its self out. but on another note, the engine mount is either dead or dieing. squeaks with engine movement, running or not, and of course it is the oil filled/ hydrolic one that cost about 1k to get.

Bluevitz-rs · 03-18-2014, 11:01 PM

If it comes to replacing it just get a used one.

Golddeenoh · 03-19-2014, 05:31 PM

are these the correct ones?

http://www.ebay.com/itm/2006-2009-To...731b6f&vxp=mtr

Bluevitz-rs · 03-19-2014, 05:47 PM

They would appear to be. The ones for the Echo are all totally different.

03-17-2014, 05:20 PM	#20
Golddeenoh Takes corners too fast! View User's Garage Drives: Absolute Red 2009 Yaris HB Join Date: Apr 2012 Location: Columbia, SC Posts: 830	it is definitely different. improved rev response, better grip from the clutch. weird to let out on, it has free travel until the top 75% of the peddle movement, then it starts to grab and is completely engaged by 80% travel. it lets out like a Honda, kind of weird. It will take some getting used to. __________________ mods:15''Drag DR21 w/Nitto NeoGen 205/50R15, Tanabe DF210 lowering springs 1.6/1.8, TRD Rear Sway Bar, Tanabe Front Sway Bar, Micro Image Short Throw Shift Kit (both in and under), 8.64lbs flywheel, F1 Stage 4 Clutch, AEM Cold Air Intake (Red), Megan Racing Header, DC Sports Axle Back Exhaust, Micro Image Crank Pulley, NST lite Alternator Pulley, ARP Manifold Stud Kit,Tanabe Front Strut Tower Brace, ScanGuage II, Micro Image Silicone Radiator Hose Kit (Red), NRG Carbon Fiber Shift Knob (round), 2009-2011 Toyota Yaris Liftback Foglight kit, NRG Grounding Kit (Red), Hella Horns(Red),CF Hood

03-18-2014, 08:30 PM	#22
Golddeenoh Takes corners too fast! View User's Garage Drives: Absolute Red 2009 Yaris HB Join Date: Apr 2012 Location: Columbia, SC Posts: 830	the slack eased its self out. but on another note, the engine mount is either dead or dieing. squeaks with engine movement, running or not, and of course it is the oil filled/ hydrolic one that cost about 1k to get. __________________ mods:15''Drag DR21 w/Nitto NeoGen 205/50R15, Tanabe DF210 lowering springs 1.6/1.8, TRD Rear Sway Bar, Tanabe Front Sway Bar, Micro Image Short Throw Shift Kit (both in and under), 8.64lbs flywheel, F1 Stage 4 Clutch, AEM Cold Air Intake (Red), Megan Racing Header, DC Sports Axle Back Exhaust, Micro Image Crank Pulley, NST lite Alternator Pulley, ARP Manifold Stud Kit,Tanabe Front Strut Tower Brace, ScanGuage II, Micro Image Silicone Radiator Hose Kit (Red), NRG Carbon Fiber Shift Knob (round), 2009-2011 Toyota Yaris Liftback Foglight kit, NRG Grounding Kit (Red), Hella Horns(Red),CF Hood

03-19-2014, 05:31 PM	#24
Golddeenoh Takes corners too fast! View User's Garage Drives: Absolute Red 2009 Yaris HB Join Date: Apr 2012 Location: Columbia, SC Posts: 830	are these the correct ones? http://www.ebay.com/itm/2006-2009-To...731b6f&vxp=mtr __________________ mods:15''Drag DR21 w/Nitto NeoGen 205/50R15, Tanabe DF210 lowering springs 1.6/1.8, TRD Rear Sway Bar, Tanabe Front Sway Bar, Micro Image Short Throw Shift Kit (both in and under), 8.64lbs flywheel, F1 Stage 4 Clutch, AEM Cold Air Intake (Red), Megan Racing Header, DC Sports Axle Back Exhaust, Micro Image Crank Pulley, NST lite Alternator Pulley, ARP Manifold Stud Kit,Tanabe Front Strut Tower Brace, ScanGuage II, Micro Image Silicone Radiator Hose Kit (Red), NRG Carbon Fiber Shift Knob (round), 2009-2011 Toyota Yaris Liftback Foglight kit, NRG Grounding Kit (Red), Hella Horns(Red),CF Hood

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official: Toyota dropping the Matrix after 2013 (from U.S.)	Kal-El	Off-topic / Other Cars / Everything else Discussions	10	08-09-2013 08:49 AM
Dropping out of boost/not activating	47_MasoN_47	Forced Induction Forum	13	05-06-2013 05:26 PM
MPG Dropping	NRclem	Fuel Economy Forum	20	01-07-2013 12:39 PM
mpg dropping..	marcus	Fuel Economy Forum	14	11-10-2010 08:28 AM

03-17-2014, 04:01 PM	#19
Bluevitz-rs 1NZ-6spd View User's Garage Drives: '05 6-Spd Vitz RS Join Date: Oct 2008 Location: Oshawa, Ontario, Canada Posts: 2,967	You'll probably notice a lot more driveline vibration, but less free play from on throttle to off throttle.

03-17-2014, 07:03 PM	#21
Bluevitz-rs 1NZ-6spd View User's Garage Drives: '05 6-Spd Vitz RS Join Date: Oct 2008 Location: Oshawa, Ontario, Canada Posts: 2,967	You can adjust all aspects of the clutch travel by adjusting the pushrod from the pedal to the master cylinder. Just loosen the rod back a bit then adjust the top out stopper to take up the slack.

03-18-2014, 11:01 PM	#23
Bluevitz-rs 1NZ-6spd View User's Garage Drives: '05 6-Spd Vitz RS Join Date: Oct 2008 Location: Oshawa, Ontario, Canada Posts: 2,967	If it comes to replacing it just get a used one.

03-19-2014, 05:47 PM	#25
Bluevitz-rs 1NZ-6spd View User's Garage Drives: '05 6-Spd Vitz RS Join Date: Oct 2008 Location: Oshawa, Ontario, Canada Posts: 2,967	They would appear to be. The ones for the Echo are all totally different.