Scanguage II connector pins defect??

[auxmike]

Originally Posted by Shroomster

have you checked your ACC/Outlet fuse? DLC is usually run with that circuit.

DLC is fine, it's the Orange scanner that won't link up to the car.

[auxmike]

Can any other scanguage owners check their connectors and post back please?
THX

[auxmike]

Mystery solved!
Scanguage answered my Email!;


Mike,

The two longer pins are the ground pins, they are the chassis ground and the signal ground. These two pins are longer is because it is important that the ground is established before the power pins are connected to the OBD II port. This is a standard set the SAE, which we follow and so should anyone else that plugs into the OBD II port. Please let me know if you have any further questions.



Thank You,

Leah O'Campo
Communications Administrator
Linear Logic, LLC

[Shroomster]

Originally Posted by auxmike

DLC is fine, it's the Orange scanner that won't link up to the car.

I realized that after posting