Spoiler attachment question - Toyota Yaris Forums

JohnnyBomber101 · 04-14-2011, 08:50 PM

I have read every post that the word "spoiler" comes up with in search. I can not find anything on how to attach one of the "J's" style spoilers to the Yaris Hatch. I have been looking at pics of several HBs that have them and I can only assume that they have drilled holes and used sheet metal screws or something like that.

Does this sound correct to anyone? Does anyone have any advice on this? The top of the hatch is double walled, so I can not use a nut and bolt setup.

Could someone let me know the method they used?

Brian · 04-14-2011, 09:23 PM

When I installed an OEM spoiler on a LB, I had to drill 4 holes in the outer skin. It was held in place with 2 clips and two rubber plugs. The rubber plugs had a threaded metal center and when the bolts are inserted and tightened they expand to secure it in the hole. The spoiler also had double sided tape for added security.

JohnnyBomber101 · 04-14-2011, 09:54 PM

Thanks Brian. I will check with Toyota on those plugs.

Brian · 04-14-2011, 10:10 PM

P/n is 76865-52030 for the rubber retainer and p/n for the screw is 90159-60431. Its about $4 for the retainer and about $.75 for the screw.

04-14-2011, 08:50 PM	#1
JohnnyBomber101 Drives: 2008 Yaris 3dr Join Date: Apr 2011 Location: Virginia Posts: 37	Spoiler attachment question I have read every post that the word "spoiler" comes up with in search. I can not find anything on how to attach one of the "J's" style spoilers to the Yaris Hatch. I have been looking at pics of several HBs that have them and I can only assume that they have drilled holes and used sheet metal screws or something like that. Does this sound correct to anyone? Does anyone have any advice on this? The top of the hatch is double walled, so I can not use a nut and bolt setup. Could someone let me know the method they used? __________________ "No problem is insoluble, with the correct application of explosives." EOD - because firefighters need heroes too... Scoliosis - because real women have curves!

04-14-2011, 09:23 PM	#2
Brian Drives: '07 Yaris turbo, '11 Juke Join Date: Mar 2007 Location: Riverside, CA Posts: 849	When I installed an OEM spoiler on a LB, I had to drill 4 holes in the outer skin. It was held in place with 2 clips and two rubber plugs. The rubber plugs had a threaded metal center and when the bolts are inserted and tightened they expand to secure it in the hole. The spoiler also had double sided tape for added security. __________________ http://www.cardomain.com/ride/3875996

04-14-2011, 09:54 PM	#3
JohnnyBomber101 Drives: 2008 Yaris 3dr Join Date: Apr 2011 Location: Virginia Posts: 37	Thanks Brian. I will check with Toyota on those plugs. __________________ "No problem is insoluble, with the correct application of explosives." EOD - because firefighters need heroes too... Scoliosis - because real women have curves!

04-14-2011, 10:10 PM	#4
Brian Drives: '07 Yaris turbo, '11 Juke Join Date: Mar 2007 Location: Riverside, CA Posts: 849	P/n is 76865-52030 for the rubber retainer and p/n for the screw is 90159-60431. Its about $4 for the retainer and about $.75 for the screw. __________________ http://www.cardomain.com/ride/3875996

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rear Spoiler SWAP?? From 08 to 09	TRDMarty	General Yaris / Vitz Discussion	4	03-18-2011 04:30 PM
TRD Vios Spoiler fitment?	AdeJong 03	Cosmetic Modifications (Exterior/Interior)	12	08-24-2009 09:06 PM
2009 Spoiler Question	pariahdecss	Cosmetic Modifications (Exterior/Interior)	16	12-19-2008 11:22 PM
RS Spoiler (Yes i tried to search it!!)	hasher22	Cosmetic Modifications (Exterior/Interior)	2	08-23-2007 11:02 PM
RS Spoiler price question	Sway84	Cosmetic Modifications (Exterior/Interior)	3	06-04-2007 10:35 PM