Blitz for parts or repair. - Toyota Yaris Forums

07stlYaris · 02-27-2015, 11:03 PM

I have the Blitz that Tolmach (look up posts) had from an xb. The clutch bearing spun on the snout so it will need either a fixed pulley or a sleeve where the clutch bearing sits. The supercharger spins fine and boosted even with the aforementioned bearing problem. I'm selling it as used for parts so theres no issue regarding the fact that its needing some work. I'll take $500 shipped anywhere in the lower 48. Let me state this again, it NEEDS a bit of work to make it fully functional again. Do not buy unless you have access to a machine shop. I'll include the blitz fmc and bracketry so all you need to do is fix the snout and you should be good to go.

Bluevitz-rs · 02-28-2015, 07:29 AM

any pictures of the issue?

07stlYaris · 02-28-2015, 11:20 AM

Sold. No pics but if you've ever seen the snout without the clutch, it has 2 snapring grooves (inner for the stator and outer for the rotor). The area on the top of the snout where the rotor bearing sits (in between the grooves) is now a few thousandths smaller making the bearing wobbly on the shaft.

ezhacker1 · 02-28-2015, 11:45 AM

wow that was quick. the entire install hardware even with the required fix, such a cheap price

02-27-2015, 11:03 PM	#1
07stlYaris If Its Not Blown It Sucks View User's Garage Drives: 07 Yaris LB Meteorite Join Date: Nov 2011 Location: STL Posts: 117	Blitz for parts or repair. I have the Blitz that Tolmach (look up posts) had from an xb. The clutch bearing spun on the snout so it will need either a fixed pulley or a sleeve where the clutch bearing sits. The supercharger spins fine and boosted even with the aforementioned bearing problem. I'm selling it as used for parts so theres no issue regarding the fact that its needing some work. I'll take $500 shipped anywhere in the lower 48. Let me state this again, it NEEDS a bit of work to make it fully functional again. Do not buy unless you have access to a machine shop. I'll include the blitz fmc and bracketry so all you need to do is fix the snout and you should be good to go. Last edited by 07stlYaris; 02-28-2015 at 11:36 AM.

02-28-2015, 11:45 AM	#4
ezhacker1 Drives: Decepticon - Ravage Join Date: Nov 2008 Location: San Francisco Posts: 1,462	wow that was quick. the entire install hardware even with the required fix, such a cheap price __________________ Check out my Build thread: http://www.yarisworld.com/forums/showthread.php?t=52274

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
List of Boosted Yarisworld Members	whooppee777	Forced Induction Forum	262	11-23-2022 05:49 AM
Looking fo blitz or blitz parts	unikyaris	Willing to Buy by private party	2	01-16-2014 08:57 AM
Blitz throttle controller	808_Yaris	Performance Modifications	43	10-22-2009 04:36 AM
BLITZ HAS CLOSED?????	ROCKLAND TOYOTA	General Yaris / Vitz Discussion	12	08-13-2009 05:35 AM
GI: OFFICIAL BLITZ YARIS	laszlo	Cars for Sale by private party	11	11-25-2008 05:05 AM

02-28-2015, 07:29 AM	#2
Bluevitz-rs 1NZ-6spd View User's Garage Drives: '05 6-Spd Vitz RS Join Date: Oct 2008 Location: Oshawa, Ontario, Canada Posts: 2,967	any pictures of the issue?

02-28-2015, 11:20 AM	#3
07stlYaris If Its Not Blown It Sucks View User's Garage Drives: 07 Yaris LB Meteorite Join Date: Nov 2011 Location: STL Posts: 117	Sold. No pics but if you've ever seen the snout without the clutch, it has 2 snapring grooves (inner for the stator and outer for the rotor). The area on the top of the snout where the rotor bearing sits (in between the grooves) is now a few thousandths smaller making the bearing wobbly on the shaft.