 |
 |
|
|
03-04-2017, 10:57 PM
|
#1 |
  Drives: 2007 yaris HB Join Date: Mar 2016
Location: Barrie Canada
Posts: 690
|
Last strut question...I promise.
I have the proper KYB strut model for my yaris.
My main concern is will the oem strut top plate fit on the KYB,or should I hold off and get new kyb top plate.My plan was to reuse the oem boot/insulator aswell. Still waiting back from KYB but figured someone here would know. P.S I hope I am not polluting the board and perhaps should of piggybacked off some of my other strut related posts? |
|
|
|
03-04-2017, 11:21 PM
|
#2 |
Drives: '08 2zr swapped Vios M/T Join Date: Oct 2012
Location: Caledonia Ont.
Posts: 2,938
|
I'm assuming you're talking about the bearing as the yaris doesn't really have too bar mounts? The bearing assembly can be reused with the kyb's. I installed new own bearings on my kyb's but I regressed the old ones and saved them as they're in good shape just needed new grease
__________________
No one ever wants to give a Yaris the point by... 
|
|
|
|
|
03-05-2017, 12:00 AM
|
#3 |
Drives: 07 yaris hatchback Join Date: Dec 2016
Location: Nahant M.A
Posts: 265
|
My oem struts and shocks are kyb
Sent from my SM-G935T using Tapatalk |
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Rear shock, sway bar, and strut brace refit | Tapokata | DIY / Maintenance / Service | 19 | 05-31-2016 01:05 AM |
| Cusco strut bar question. | mastaofdisasta | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 3 | 04-06-2016 04:31 PM |
| Megan front strut bars Question??? | GnomeBody | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 9 | 09-26-2009 11:52 PM |
| Strut bar - To preload or not to preload that is the question | YarisSedan | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 4 | 04-02-2009 09:38 PM |
| Question about 2 kinds of TRD springs & rear strut bar | Astroman | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 3 | 06-18-2007 05:44 PM |
Linear Mode
