Yoda's Turbo Log - Page 13 - Toyota Yaris Forums

Yoda · 02-15-2011, 07:13 PM

Afr is high 11s to 11.5 when I hit full boost. He also advised me not to floor it below 2.5k
Too much load on the engine too soon. I make full boost @ 2.3k rpm! As long as I am not stupid with It i should be ok. If I was on a dynojet I prob would have hit 200

cali yaris · 02-15-2011, 07:28 PM

^ VERY nice

cdydjded · 02-15-2011, 10:10 PM

Quote:

Originally Posted by Yoda

Afr is high 11s to 11.5 when I hit full boost. He also advised me not to floor it below 2.5k
Too much load on the engine too soon. I make full boost @ 2.3k rpm! As long as I am not stupid with It i should be ok. If I was on a dynojet I prob would have hit 200

Stock injectors?

Yoda · 02-15-2011, 10:12 PM

Quote:

Originally Posted by cdydjded

Stock injectors?

no 1zz

PETERPOOP · 02-15-2011, 10:31 PM

sweeeet

cali yaris · 02-15-2011, 11:47 PM

At peak power, what duty cycle were the injectors running?

Focus_Sh1ft · 02-16-2011, 02:20 PM

I'd be careful with that turbo if I were you. No one wants to see a repeat of what happened to poor pimp. Otherwise, great numbers.

Yoda · 02-16-2011, 02:48 PM

dont kno what duty cycle for the injectors cali.
and to my surprise i have no shaft play at all. Feels just like knew and i was running without a bov for like 3 weeks before i got the greddy...

Yoda · 02-24-2011, 07:33 PM

Sigh not enough power. Gonna get my engine built. So people talk about needing to upgrade axles when you hit 245 whp. So my question is upgrade to what? O and I am gonna shoot for 20 psi and then I will go for cosmetics

Blown_xa · 02-24-2011, 09:10 PM

I wouldn't worry about axles unless you hit the dragstrip with slicks. Most of the time you won't have enough traction to break one.

Congrats on good hp numbers. I could never keep a stock motor in one piece at 150whp. Its crazy you got those numbers with 1zz injectors, I ran tC injectors maxed out to get 150whp but with stock fuel pump. Did you run a walboro perhaps?

PETERPOOP · 02-24-2011, 10:32 PM

Quote:

Originally Posted by Yoda

Sigh not enough power. Gonna get my engine built. So people talk about needing to upgrade axles when you hit 245 whp. So my question is upgrade to what? O and I am gonna shoot for 20 psi and then I will go for cosmetics

Oh my. Anything specific that has made you want to do this? Lose a race, rode in a friend's faster car, or got a taste of "power" and want more?!?!?!

cali yaris · 02-24-2011, 10:35 PM

Agreed you probably don't need built axles, but I got mine from the Drive Shaft Shop:

http://www.driveshaftshop.com/

Focus_Sh1ft · 02-24-2011, 10:56 PM

Haha, you weren't kidding when you said that promotion meant A LOT of flex room.

PETERPOOP · 02-25-2011, 02:08 AM

ya seriously!

Bluevitz-rs · 02-25-2011, 09:41 AM

Surfing eBay and came across these... FleaBay link

cali yaris · 02-25-2011, 11:56 AM

I think I know the company that makes those, I shot them an email. I would just worry about being the guinea pig!

Bluevitz-rs · 02-25-2011, 12:03 PM

is "Maxspeedingrods" the name of the company or is that just the ebay name?

Focus_Sh1ft · 02-25-2011, 02:05 PM

Good stuff - I was under the impression the only rods for the 1NZ were made by that company XBG was getting them from. Can't remember the name atm.

Otherwise, those look like some nice big beefy rods. They should be able to take some abuse.

... That sounded pretty awful.

02-15-2011, 07:28 PM	#218
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	^ VERY nice __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

02-15-2011, 11:47 PM	#222
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	At peak power, what duty cycle were the injectors running? __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

02-24-2011, 09:10 PM	#226
Blown_xa Drives: Scion xA Join Date: Oct 2009 Location: Virginia Posts: 449	I wouldn't worry about axles unless you hit the dragstrip with slicks. Most of the time you won't have enough traction to break one. Congrats on good hp numbers. I could never keep a stock motor in one piece at 150whp. Its crazy you got those numbers with 1zz injectors, I ran tC injectors maxed out to get 150whp but with stock fuel pump. Did you run a walboro perhaps? __________________ Ptuning.com

02-24-2011, 10:35 PM	#228
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	Agreed you probably don't need built axles, but I got mine from the Drive Shaft Shop: http://www.driveshaftshop.com/ __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

02-25-2011, 11:56 AM	#232
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	I think I know the company that makes those, I shot them an email. I would just worry about being the guinea pig! __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

02-15-2011, 07:13 PM	#217
Yoda Drives: 2008 Black Sedan Join Date: Oct 2008 Location: FL Posts: 966	Afr is high 11s to 11.5 when I hit full boost. He also advised me not to floor it below 2.5k Too much load on the engine too soon. I make full boost @ 2.3k rpm! As long as I am not stupid with It i should be ok. If I was on a dynojet I prob would have hit 200

02-15-2011, 10:31 PM	#221
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	sweeeet

02-16-2011, 02:20 PM	#223
Focus_Sh1ft Drives: 08 Yaris Turbo; 06 tC Turbo Join Date: Jan 2010 Location: New Jersey Posts: 875	I'd be careful with that turbo if I were you. No one wants to see a repeat of what happened to poor pimp. Otherwise, great numbers.

02-16-2011, 02:48 PM	#224
Yoda Drives: 2008 Black Sedan Join Date: Oct 2008 Location: FL Posts: 966	dont kno what duty cycle for the injectors cali. and to my surprise i have no shaft play at all. Feels just like knew and i was running without a bov for like 3 weeks before i got the greddy...

02-24-2011, 07:33 PM	#225
Yoda Drives: 2008 Black Sedan Join Date: Oct 2008 Location: FL Posts: 966	Sigh not enough power. Gonna get my engine built. So people talk about needing to upgrade axles when you hit 245 whp. So my question is upgrade to what? O and I am gonna shoot for 20 psi and then I will go for cosmetics

02-24-2011, 10:56 PM	#229
Focus_Sh1ft Drives: 08 Yaris Turbo; 06 tC Turbo Join Date: Jan 2010 Location: New Jersey Posts: 875	Haha, you weren't kidding when you said that promotion meant A LOT of flex room.

02-25-2011, 02:08 AM	#230
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	ya seriously!

02-25-2011, 09:41 AM	#231
Bluevitz-rs 1NZ-6spd View User's Garage Drives: '05 6-Spd Vitz RS Join Date: Oct 2008 Location: Oshawa, Ontario, Canada Posts: 2,967	Surfing eBay and came across these... FleaBay link

02-25-2011, 12:03 PM	#233
Bluevitz-rs 1NZ-6spd View User's Garage Drives: '05 6-Spd Vitz RS Join Date: Oct 2008 Location: Oshawa, Ontario, Canada Posts: 2,967	is "Maxspeedingrods" the name of the company or is that just the ebay name?

02-25-2011, 02:05 PM	#234
Focus_Sh1ft Drives: 08 Yaris Turbo; 06 tC Turbo Join Date: Jan 2010 Location: New Jersey Posts: 875	Good stuff - I was under the impression the only rods for the 1NZ were made by that company XBG was getting them from. Can't remember the name atm. Otherwise, those look like some nice big beefy rods. They should be able to take some abuse. ... That sounded pretty awful.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Turbo Project Yaris TS 1.8L	CASTREX	Yaris TS Talk	40	08-21-2009 10:24 AM
HKS turbo timer type 1	Tamago	Performance Modifications	3	07-21-2009 11:59 AM
Turbo Kit - trade for stock parts!	crankyelbow	Items for Sale by private party	62	02-03-2009 12:30 PM
delayed turbo project...	joey1320	Forced Induction Forum	8	09-26-2007 11:18 PM
Vitz Rs turbo vs U.S. Yaris add turbo?	weaponrcamry	Performance Modifications	18	08-09-2006 08:45 PM