|
06-30-2010, 12:42 AM | #1 |
Rides canyon walls
Drives: 1988 RX7 FC 10th AE Join Date: Jun 2007
Location: Long Beach, CA
Posts: 503
|
Removing Power Steering/Replacing PS Rack with Manual Rack
Long story short I cracked/broke my steering rack. They have 'manual' racks advertised and im assuming that means no power steering. I'm wondering what needs to be done in order to properly remove the power steering system so i can use the manual rack.
Thanks Heres a pic:
__________________
OEM Style Wing Spoiler | TRD Axle-Back Exhaust | Megan Lowering Springs (1.5 f/r) | Simota Carbon Charger Intake | Python 871XP Alarm System | Aluminum Sports Pedal | 17x7 +42mm Enkei J10 Black w/ Silver Lip | 205/40 Falken Ziex-912 | NST Lite Crank Pulley Red | 1ZZ-FE Throttle Body | AMK Racing Header Last edited by eii; 06-30-2010 at 05:37 AM. |
06-30-2010, 08:37 AM | #2 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
All 06+ Yaris have Electronic Power Steering. The electric motor is located up on the column, so that might be why so many eBay sellers list the rack as being "manual".
For conversion to manual, you can simply pull the EPS fuse, but the electric motor will offer some additional resistance to turning. You could probably pull the electric motor off of the steering column to alleviate that. For replacing the rack, check out the power steering section of the service manual: http://www.yarisworld.com/forums/showthread.php?t=1768 |
06-30-2010, 09:30 AM | #3 |
Drives: 2008 HB, A/T, Power W/L/M Join Date: Oct 2008
Location: LI, New Yawk
Posts: 2,063
|
How did this happen?
Would'nt warr cover this??
__________________
Never take eyes off opponent - Bruce Lee |
06-30-2010, 09:52 AM | #4 | |
Rides canyon walls
Drives: 1988 RX7 FC 10th AE Join Date: Jun 2007
Location: Long Beach, CA
Posts: 503
|
Quote:
I was gonna get this replaced by warranty, but when I went to the dealer my warranty was out by 1 month :)....
__________________
OEM Style Wing Spoiler | TRD Axle-Back Exhaust | Megan Lowering Springs (1.5 f/r) | Simota Carbon Charger Intake | Python 871XP Alarm System | Aluminum Sports Pedal | 17x7 +42mm Enkei J10 Black w/ Silver Lip | 205/40 Falken Ziex-912 | NST Lite Crank Pulley Red | 1ZZ-FE Throttle Body | AMK Racing Header |
|
06-30-2010, 10:10 AM | #5 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
|
06-30-2010, 10:52 AM | #6 |
Banned
Drives: yw calls me douche and racist. Join Date: Aug 2007
Location: hay
Posts: 2,183
|
|
06-30-2010, 11:15 AM | #7 |
Rides canyon walls
Drives: 1988 RX7 FC 10th AE Join Date: Jun 2007
Location: Long Beach, CA
Posts: 503
|
lol I was so sad. I was gonna get the entire rack and tie rods (which I also need replaced) for free. $100 off ebay for rack and pinion + tie rods isnt that bad. I actually had been going up to GMR 4 times a week for 2-3 months with my rack like this. Also my hub/wheel bearing was completely destroyed and cracked too which I was running like that for a while too. It was louder than my engine. I replaced the bearing and hub a month ago and its going out again so I'm pretty sure my knuckle is bust too.
__________________
OEM Style Wing Spoiler | TRD Axle-Back Exhaust | Megan Lowering Springs (1.5 f/r) | Simota Carbon Charger Intake | Python 871XP Alarm System | Aluminum Sports Pedal | 17x7 +42mm Enkei J10 Black w/ Silver Lip | 205/40 Falken Ziex-912 | NST Lite Crank Pulley Red | 1ZZ-FE Throttle Body | AMK Racing Header |
06-30-2010, 02:40 PM | #8 |
Banned
Drives: yw calls me douche and racist. Join Date: Aug 2007
Location: hay
Posts: 2,183
|
I wonder how bad mine is. I've been to the track and many auto-x. But I never do regular checks.
|
06-30-2010, 06:05 PM | #9 |
Rides canyon walls
Drives: 1988 RX7 FC 10th AE Join Date: Jun 2007
Location: Long Beach, CA
Posts: 503
|
na, yours is good, trust me :)..
__________________
OEM Style Wing Spoiler | TRD Axle-Back Exhaust | Megan Lowering Springs (1.5 f/r) | Simota Carbon Charger Intake | Python 871XP Alarm System | Aluminum Sports Pedal | 17x7 +42mm Enkei J10 Black w/ Silver Lip | 205/40 Falken Ziex-912 | NST Lite Crank Pulley Red | 1ZZ-FE Throttle Body | AMK Racing Header |
07-01-2010, 07:24 AM | #10 |
Drives: no-longer-boosted '10 Yaris Join Date: Nov 2009
Location: Angus, Ontario
Posts: 1,891
|
what did u do?
__________________
If it has boobs or wheels sooner or later your gonna have problems with it |
07-01-2010, 07:48 AM | #11 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Perhaps a little too much of this?
|
07-01-2010, 09:26 AM | #12 |
Rides canyon walls
Drives: 1988 RX7 FC 10th AE Join Date: Jun 2007
Location: Long Beach, CA
Posts: 503
|
Mmm, not something I like to brag about, but I've learned from my mistakes so I shall share..
Left turn, under steer, right wheel slammed into wall, rear flew up in the air. Replaced the lca and strut, but the + chamber was still present in right wheel. Assuming/most likely frame damage :). Also Im sure that the rack and pinion had cracked from the crash and finally broke off completely about 2-3 months ago. This accident happened almost a year ago. Pics of the wheel Pic of hub/wheel bearing Pic of wheel, bad angle, but theres a few degress of positive chamber
__________________
OEM Style Wing Spoiler | TRD Axle-Back Exhaust | Megan Lowering Springs (1.5 f/r) | Simota Carbon Charger Intake | Python 871XP Alarm System | Aluminum Sports Pedal | 17x7 +42mm Enkei J10 Black w/ Silver Lip | 205/40 Falken Ziex-912 | NST Lite Crank Pulley Red | 1ZZ-FE Throttle Body | AMK Racing Header Last edited by eii; 07-01-2010 at 10:52 AM. |
07-02-2010, 03:54 AM | #13 |
Drives: no-longer-boosted '10 Yaris Join Date: Nov 2009
Location: Angus, Ontario
Posts: 1,891
|
U HIT A WALL??!!! u hit an immobile object?? lol, bet u were having way too much fun, lol.
if u havent broken anything ur not having enough fun :) any body damage? and i can almost assure u have damage on the other side from this.
__________________
If it has boobs or wheels sooner or later your gonna have problems with it |
07-02-2010, 08:05 PM | #14 |
Rides canyon walls
Drives: 1988 RX7 FC 10th AE Join Date: Jun 2007
Location: Long Beach, CA
Posts: 503
|
Dude, that wall came out of no where and moved in front of my car! Yeah i have too much fun and still doing so with my cracked rack :). My side skirt on that side got super scratched up and some tiny unnoticeable scratches on the rear door. My friend did the same exact thing at the same turn in his civic ef. He had some nice volks on, his wheel literally disentigrated. :)
__________________
OEM Style Wing Spoiler | TRD Axle-Back Exhaust | Megan Lowering Springs (1.5 f/r) | Simota Carbon Charger Intake | Python 871XP Alarm System | Aluminum Sports Pedal | 17x7 +42mm Enkei J10 Black w/ Silver Lip | 205/40 Falken Ziex-912 | NST Lite Crank Pulley Red | 1ZZ-FE Throttle Body | AMK Racing Header |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
When will the Yaris hit the showrooms at dealers? | Petrolhead | New YARIS Purchase Forum | 181 | 11-28-2011 07:03 AM |
From Manual Window/Lock to Power W/L | eocintron | Cosmetic Modifications (Exterior/Interior) | 5 | 11-10-2009 10:31 PM |
from manual to power windows/locks. | TickleTimeTim | Cosmetic Modifications (Exterior/Interior) | 3 | 04-27-2009 12:28 AM |
Well seems the F&*king Power Package with Manual is impossible in the States(Hatch) | gaffo | General Yaris / Vitz Discussion | 28 | 07-15-2007 07:55 PM |
How many 5-speed manual with power package? | abcando | General Yaris / Vitz Discussion | 11 | 08-01-2006 09:54 AM |