Torque Specs 2009 Suspension

[GrayYaris]

Is there any place on the site with torque specs for bolts on the Yaris? I have the hub off my 2009 (waiting to get a new bearing pressed in) and am trying to figure out what to set the wrench at. I really only care about the spindle nut but I guess it would be good to get my tie rod end and lower ball joint right too.

[CTScott]

You can download the complete service manual, thanks to the Micro Image forum: http://www.microimageonline.com/foru...32-YARIS-FILES

It is the 2007 version, but the specs are the same for your 2009.

[GrayYaris]

Originally Posted by CTScott

You can download the complete service manual, thanks to the Micro Image forum: http://www.microimageonline.com/foru...32-YARIS-FILES

It is the 2007 version, but the specs are the same for your 2009.

Thanks Scott after I posted I remembered that you had sent me that link a while back.

Would it be useful to yaris world to have a post with suspension torque specs or does everyone just head over to micro image?

Anyway

According to the manual on micro image titled "driveshaft.pdf" the torque is 160 ft pounds for the axle nut.