1ZZ Throttle Body Spacer - Toyota Yaris Forums

*tk-421* · 03-11-2009, 03:59 PM

Found this on eBay.

How would this spacer perform it we were to couple it with a 1ZZ TB on a 1NZ engine? TIA

BLAZINBLUEVITZ · 03-11-2009, 04:13 PM

i think WHOOPPIE had/has a tc spacer on his.....

thebarber · 03-11-2009, 05:55 PM

guys w/ 1zz matrix, vibes, and corollas seemed to like this mod...adds a couple ponies...

but i dont think i could justify the price for this on a yaris...

mikenacarato · 03-11-2009, 09:17 PM

i cannot click on ebay links at work, but the picture is not the right spacer.

AlexNet0 · 03-11-2009, 09:26 PM

its a generic picture, shows the same one on ebay, I might try to contact the guy and get a real pic

PHXDEMON · 03-11-2009, 09:46 PM

Doesn't seem like it would be worth the price tag for maybe 1-2 HP even if it does work.

thebarber · 03-20-2009, 12:08 PM

Quote:

Originally Posted by Yaris T-Sport

anyone know if the TB spacer can really increase HP, or just a waste of money? WHOOPPIE can you give a review on yours?

search 9thgencorolla.com, genvibe.com, or matrixowners.com

blacksandiegovitz · 03-20-2009, 08:25 PM

Quote:

Originally Posted by PHXDEMON

Doesn't seem like it would be worth the price tag for maybe 1-2 HP even if it does work.

Umm really cause a nst underdrive pulley is listed for $112 shipped from microimageonline.com and only add like 1-2hp's ands the tb spacer cost less and will get you the same hp gains

I plan on installing a 1zz tb and will give this spacer a try for S's and G's

Nexus1155 · 03-20-2009, 08:44 PM

yeah but you have to understand what the underdrive/lightweight pulleys do to understand it. You're basically swapping out a heavy pulley for one with less rotational mass..

hatchbackkid82 · 03-27-2009, 10:47 AM

will this spacer help in anyway to get CEL to go off if we already have a 1ZZ tb?

yarstar · 03-27-2009, 11:12 AM

This may be my next mod.

YarisSedan · 03-27-2009, 11:31 AM

Someone needs to design a direct bolt on design for our throttle body

*tk-421* · 03-27-2009, 01:03 PM

Quote:

Originally Posted by yarstar

This may be my next mod.

Please keep us in the loop if you do go for one of these! I'm interested in this mod as well.

yarstar · 03-27-2009, 05:08 PM

Quote:

Originally Posted by tk-421

Please keep us in the loop if you do go for one of these! I'm interested in this mod as well.

Damn TK, I was hoping you would be the guinea pig with this! I was watching to see what you did!

AlexNet0 · 03-27-2009, 05:51 PM

Quote:

Originally Posted by YarisSedan

Someone needs to design a direct bolt on design for our throttle body

its being worked on, as well as another added option.

and I wrote to the seller of the item and they would not send me a picture.

whooppee777 · 03-27-2009, 06:14 PM

im using the Tc tb spacer with the 1zz throttle body. since theres a diy for switching the chips on the tb's im going to swap the stock chips onto the Tc tb cuz the Tc tb definitely had greater gains than the 1zz tb

YarisSedan · 03-27-2009, 07:07 PM

did you notice any difference with the tc tb spacer

*tk-421* · 03-27-2009, 08:44 PM

Quote:

Originally Posted by yarstar

Damn TK, I was hoping you would be the guinea pig with this! I was watching to see what you did!

Oh, so that's how it's gonna be, eh? I've already guinea-pigged for a couple of projects... It's your turn now!

03-11-2009, 03:59 PM	#1
tk-421 Super Moderator View User's Garage Drives: 5D-07-LB Join Date: Jan 2007 Location: Dagobah Posts: 4,263	1ZZ Throttle Body Spacer Found this on eBay. How would this spacer perform it we were to couple it with a 1ZZ TB on a 1NZ engine? TIA __________________ --[ FORUM RULES ]--[ SEARCHING TIPS ]--[ EYELIDS PICS ]--[ RBK SPOILER ]--[ BEST/WORST INVESTMENTS ]--

03-11-2009, 04:13 PM	#2
BLAZINBLUEVITZ View User's Garage Drives: 2007 YARIS 3DOOR Join Date: Jan 2009 Location: NEW YORK Posts: 1,275	i think WHOOPPIE had/has a tc spacer on his..... __________________ EVERYBODY EVENTUALLY COMES BACK TO YARISWORLD......

03-11-2009, 05:55 PM	#3
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	guys w/ 1zz matrix, vibes, and corollas seemed to like this mod...adds a couple ponies... but i dont think i could justify the price for this on a yaris... __________________

03-11-2009, 09:26 PM	#5
AlexNet0 View User's Garage Drives: '07 Yaris 3dr Join Date: Nov 2008 Location: Rockland, ME Posts: 1,638	its a generic picture, shows the same one on ebay, I might try to contact the guy and get a real pic __________________ ---------- MI-YW ----------

03-27-2009, 11:12 AM	#11
yarstar View User's Garage Drives: 2008 Absolute Red HB Join Date: Oct 2008 Location: Georgia Posts: 264	This may be my next mod. __________________ AEM CAI, NST Pulleys/SSK, WR 4-2-1 Header, TRD axelback, R1 Concept Rotors, TRD Sway Bar, Nitto Rear Strut Bar, Cusco GT-Zero Coilovers, 1ZZ-FE 1.8L TB

03-11-2009, 09:17 PM	#4
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	i cannot click on ebay links at work, but the picture is not the right spacer.

03-11-2009, 09:46 PM	#6
PHXDEMON View User's Garage Drives: 2007 Red Liftback Join Date: Oct 2008 Location: Phoenix, AZ Posts: 885	Doesn't seem like it would be worth the price tag for maybe 1-2 HP even if it does work.

03-20-2009, 08:44 PM	#9
Nexus1155 Bathroom + Laptop = <3 Drives: Audi Join Date: Aug 2006 Location: Dorchester Posts: 1,009	yeah but you have to understand what the underdrive/lightweight pulleys do to understand it. You're basically swapping out a heavy pulley for one with less rotational mass..

03-27-2009, 10:47 AM	#10
hatchbackkid82 Drives: . Join Date: Apr 2007 Location: . Posts: 1,828	will this spacer help in anyway to get CEL to go off if we already have a 1ZZ tb?

03-27-2009, 11:31 AM	#12
YarisSedan Drives: 08 Yaris Sedan Join Date: Oct 2008 Location: California - Bay Area Posts: 2,773	Someone needs to design a direct bolt on design for our throttle body __________________ http://www.cardomain.com/ride/3210549

03-27-2009, 06:14 PM	#16
whooppee777 I used to have 1700 posts View User's Garage Drives: 2008 Yaris Hatch Join Date: Apr 2007 Location: Maryland Posts: 808	im using the Tc tb spacer with the 1zz throttle body. since theres a diy for switching the chips on the tb's im going to swap the stock chips onto the Tc tb cuz the Tc tb definitely had greater gains than the 1zz tb __________________ *First Boosted Yaris On The East Coast*

03-27-2009, 07:07 PM	#17
YarisSedan Drives: 08 Yaris Sedan Join Date: Oct 2008 Location: California - Bay Area Posts: 2,773	did you notice any difference with the tc tb spacer __________________ http://www.cardomain.com/ride/3210549

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Installed the 1zz throttle body -	AlexNet0	DIY / Maintenance / Service	135	08-01-2014 07:57 AM
Cleaning throttle body	ToTo	Performance Modifications	18	07-27-2011 05:20 PM
Toyota Throttle Body Spacer: the Best Fuel-Saving Device	davidmills	Performance Modifications	1	07-01-2007 11:38 PM
toyotafest 2007	esquiva	Photo-Video-Media Gallery	36	05-15-2007 12:03 PM
swap for 2zz-ge????	yarisTOONR82	Performance Modifications	12	03-23-2007 07:15 PM