Axleback connection rattles due to handbrake line - Toyota Yaris Forums

Yarflana · 03-09-2013, 07:50 PM

Ok, at the point where my Megan Racing axleback muffler connects to the stock mid-pipe, one of the flanges touches that side's hand brake line when at idle due to vibration and it rattles at times.

I felt the place where the flange has been touching the line and the rubbery area of the hand brake line is wearing away as you might expect.

I am wondering what I could put on the line to wrap it with that would be a good buffer and keep it quiet; it will wear, but better to wear something I wrap the brake line with vs. the brake line itself right? Moving the hand brake line away from the flange a significant amount or bending it doesn't seem like a good option to ensure good hand brake function, etc....

Any thoughts are appreciated,
Pat

hw6515 · 03-10-2013, 01:05 AM

use some wrap-around heat-shrink tubing or sleeving.

Yarflana · 03-10-2013, 05:52 PM

Thanks. Other thoughts?

Yarflana · 03-10-2013, 06:03 PM

You know, I may be able to use a combination of pushing the exhaust a bit and pulling the hand brake line away from one another enough to prevent rubbing during those idle times because anything I put on either that isn't metal will rub away eventually and the true fix is to prevent them touching. I will se what I can do.

03-09-2013, 07:50 PM	#1
Yarflana View User's Garage Drives: 2008 Base Model Join Date: Jan 2013 Location: TX Posts: 255	Axleback connection rattles due to handbrake line Ok, at the point where my Megan Racing axleback muffler connects to the stock mid-pipe, one of the flanges touches that side's hand brake line when at idle due to vibration and it rattles at times. I felt the place where the flange has been touching the line and the rubbery area of the hand brake line is wearing away as you might expect. I am wondering what I could put on the line to wrap it with that would be a good buffer and keep it quiet; it will wear, but better to wear something I wrap the brake line with vs. the brake line itself right? Moving the hand brake line away from the flange a significant amount or bending it doesn't seem like a good option to ensure good hand brake function, etc.... Any thoughts are appreciated, Pat

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Zage Turbo Kit Install - Toyota Yaris	Focus_Sh1ft	Forced Induction Forum	160	02-06-2022 08:14 PM

03-10-2013, 01:05 AM	#2
hw6515 Drives: 08 Yaris AT, 350Z GT MT Join Date: Feb 2013 Location: U.S Posts: 70	use some wrap-around heat-shrink tubing or sleeving.

03-10-2013, 05:52 PM	#3
Yarflana View User's Garage Drives: 2008 Base Model Join Date: Jan 2013 Location: TX Posts: 255	Thanks. Other thoughts?

03-10-2013, 06:03 PM	#4
Yarflana View User's Garage Drives: 2008 Base Model Join Date: Jan 2013 Location: TX Posts: 255	You know, I may be able to use a combination of pushing the exhaust a bit and pulling the hand brake line away from one another enough to prevent rubbing during those idle times because anything I put on either that isn't metal will rub away eventually and the true fix is to prevent them touching. I will se what I can do.