Remote Start DIY Wiring Guide 2006-2010 Yaris

[CTScott]

Originally Posted by Skylinecar1982

Tried the pink too also no luck but will try again tomorrow.


I can take the green wire from the ultra start ( the wire that needs the negative pulse to start.) and I can manually ground the wire twice to make the remote start think it is getting a negative pulse. Then the device will start the car. Once the car is started through the device. The factory remote will not work anymore for the vehicle.

Thanks
Mark

There are two pinks. Make sure that it's the large one on the end, not the small one in the middle.