Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > Performance Modifications
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 04-19-2011, 03:54 PM   #1
cali yaris
ULTIMATE
 
cali yaris's Avatar
 
Drives: 07 Yaris Turbo
Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
Send a message via AIM to cali yaris
vacuum hose / heater hose size

What size is the stock Yaris vacuum and heater hose? I.D.

Thanks
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.
cali yaris is offline   Reply With Quote
Old 05-16-2013, 07:47 PM   #2
47_MasoN_47
What I thought I'd do was
 
47_MasoN_47's Avatar
 
Drives: 09 Yaris Sedan
Join Date: Aug 2009
Location: Northwest Alabama
Posts: 1,140
I know this thread is 2 years old, but I've been needing to know this. I took a pair of calipers and measured the ID of the hose that goes from the valve cover to the intake manifold and it came out to 18.6mm. I found 19mm (3/4") hose online, but I'm not sure if this will work. My hose is leaking and I'd like to get a hose that doesn't have that weird insulated coating around it that I can get a proper hose clamp on instead of that piddly little metal clip.

Ideas? Opinions?

This is the hose I was looking at: http://www.amazon.com/gp/product/B00...1&s=automotive

As you can see this one is pretty expensive, so I don't want to buy it and it not fit.
__________________

My Nissan Hardbody (D21) 4x4 build log
Check out my YouTube channel (mostly shooting) - http://www.youtube.com/user/47MasoN47
47_MasoN_47 is offline   Reply With Quote
Old 05-17-2013, 10:58 AM   #3
47_MasoN_47
What I thought I'd do was
 
47_MasoN_47's Avatar
 
Drives: 09 Yaris Sedan
Join Date: Aug 2009
Location: Northwest Alabama
Posts: 1,140
Has noone replaced this hose with a non-factory part?
__________________

My Nissan Hardbody (D21) 4x4 build log
Check out my YouTube channel (mostly shooting) - http://www.youtube.com/user/47MasoN47
47_MasoN_47 is offline   Reply With Quote
Old 05-17-2013, 11:04 AM   #4
kou
 
Drives: 08 lb
Join Date: Aug 2007
Location: nj
Posts: 935
3/4 hose should work
kou is offline   Reply With Quote
Old 05-17-2013, 11:34 AM   #5
CTScott
ULTIMATE
 
CTScott's Avatar
 
Drives: 09 5dr LB, 2x 08 3dr LB
Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
I can't seem to find the thread, but a while back someone asked the same thing and I posted the measurements. Rather than measuring the existing hose, measure the nipple that it will go onto at a point other than the flared area.
__________________
CTScott is offline   Reply With Quote
Old 05-17-2013, 11:58 AM   #6
47_MasoN_47
What I thought I'd do was
 
47_MasoN_47's Avatar
 
Drives: 09 Yaris Sedan
Join Date: Aug 2009
Location: Northwest Alabama
Posts: 1,140
Yeah I had asked you at one point over on MI I believe, but I never could find that thread either.
__________________

My Nissan Hardbody (D21) 4x4 build log
Check out my YouTube channel (mostly shooting) - http://www.youtube.com/user/47MasoN47
47_MasoN_47 is offline   Reply With Quote
Old 05-17-2013, 01:46 PM   #7
TOLMACH
 
Drives: soarer
Join Date: Feb 2011
Location: Beautiful British Columbia
Posts: 954
Quote:
Originally Posted by 47_MasoN_47 View Post
I know this thread is 2 years old, but I've been needing to know this. I took a pair of calipers and measured the ID of the hose that goes from the valve cover to the intake manifold and it came out to 18.6mm. I found 19mm (3/4") hose online, but I'm not sure if this will work. My hose is leaking and I'd like to get a hose that doesn't have that weird insulated coating around it that I can get a proper hose clamp on instead of that piddly little metal clip.

Ideas? Opinions?

This is the hose I was looking at: http://www.amazon.com/gp/product/B00...1&s=automotive

As you can see this one is pretty expensive, so I don't want to buy it and it not fit.
5/8 hose is the one that you need.. just ask for one in the nearby automotive store.. very cheap stuff
TOLMACH is offline   Reply With Quote
Old 05-17-2013, 03:15 PM   #8
47_MasoN_47
What I thought I'd do was
 
47_MasoN_47's Avatar
 
Drives: 09 Yaris Sedan
Join Date: Aug 2009
Location: Northwest Alabama
Posts: 1,140
Thanks Tolmach.

Would silicone be okay to replace that valve cover to intake hose with? I read that silicone isn't safe for oil. I'm not sure how much oil goes through that hose but I know there is some, because it's all over my supercharger throttle body tube thing.
__________________

My Nissan Hardbody (D21) 4x4 build log
Check out my YouTube channel (mostly shooting) - http://www.youtube.com/user/47MasoN47
47_MasoN_47 is offline   Reply With Quote
Old 05-17-2013, 03:43 PM   #9
kou
 
Drives: 08 lb
Join Date: Aug 2007
Location: nj
Posts: 935
It will fail early as oil will soak into it. And a lot of oil blows in to the intake that is why mine is blowing into the air, mmmm the sweet smell of oil.
kou is offline   Reply With Quote
Old 05-17-2013, 04:06 PM   #10
YarisSedan
 
YarisSedan's Avatar
 
Drives: 08 Yaris Sedan
Join Date: Oct 2008
Location: California - Bay Area
Posts: 2,773
Mine is silicon and has been on there for about 3 years so far its held up.
YarisSedan is offline   Reply With Quote
Old 05-17-2013, 04:32 PM   #11
TOLMACH
 
Drives: soarer
Join Date: Feb 2011
Location: Beautiful British Columbia
Posts: 954
Quote:
Originally Posted by 47_MasoN_47 View Post
Thanks Tolmach.

Would silicone be okay to replace that valve cover to intake hose with? I read that silicone isn't safe for oil. I'm not sure how much oil goes through that hose but I know there is some, because it's all over my supercharger throttle body tube thing.
Do not know.. I am just using cheap regular one ))
TOLMACH is offline   Reply With Quote
Old 05-17-2013, 08:28 PM   #12
tooter
play every day
 
tooter's Avatar
 
Drives: 2012 Yaris L 2dr 5sp
Join Date: Apr 2012
Location: Los Angeles
Posts: 1,961
My Weapon R intake tube came with a silicone hose and I've had it on for about 9 months with no issues. No softening, no swelling, no discoloration, no deterioration. Now that you mentioned it, I'll keep a close eye on it for any changes and will post them if anything happens.
tooter is offline   Reply With Quote
Old 05-17-2013, 09:58 PM   #13
47_MasoN_47
What I thought I'd do was
 
47_MasoN_47's Avatar
 
Drives: 09 Yaris Sedan
Join Date: Aug 2009
Location: Northwest Alabama
Posts: 1,140
Even though they don't look as nice (I really wanted some pretty blue hoses haha) I went ahead and just got a regular ol black piece of heater tube. It was $5 for 2 feet of it and a couple of steel hose clamps.
__________________

My Nissan Hardbody (D21) 4x4 build log
Check out my YouTube channel (mostly shooting) - http://www.youtube.com/user/47MasoN47
47_MasoN_47 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Zage Turbo Kit Install - Toyota Yaris Focus_Sh1ft Forced Induction Forum 160 02-06-2022 08:14 PM
NEED ENGINE CHECK LIGHT CODE LIST Attitude Forced Induction Forum 12 04-11-2011 06:38 PM
Radiator hose size window_lee General Yaris / Vitz Discussion 0 03-31-2009 06:33 AM
Exhaust Pipe Size (Tamaņo del tubo de escape) carlosh Central and South America 11 08-02-2007 04:15 PM
Coolant Hose Size Question vasilios DIY / Maintenance / Service 2 06-27-2007 09:45 AM


All times are GMT -4. The time now is 07:44 PM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.