|
08-10-2015, 12:58 PM | #37 |
Tim Miller
Drives: White 2007 Yaris 4-door Join Date: Aug 2015
Location: Grapevine, TX
Posts: 1
|
Thanks Guys- Was going crazy because the mechanical assembly fell off and was hiding behind the housing...until I saw these photos, I would have given up...but keep digging around until I found it. Happy Yaris Owner.
|
12-07-2015, 11:56 AM | #38 |
Tw200--excellent!
Drives: 2010 yaris..absolutely red. Join Date: Jun 2010
Location: Ohio
Posts: 209
|
This very issue happened to me last night on my 2010 Yaris 4 door hatchback. I'm kinda heavy handed at times. In the aforementioned photos , do these dash panels (where the fan speed and recirculation knob is) "pop" off easily? Pull straight out or push panels in slightly to get them too release??? TIA
|
12-07-2015, 04:30 PM | #39 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
Yes. Just pull straight back starting with the bottom corners.
__________________
|
|
12-08-2015, 12:11 AM | #40 |
Tw200--excellent!
Drives: 2010 yaris..absolutely red. Join Date: Jun 2010
Location: Ohio
Posts: 209
|
Thanks Scott , this Forum is a vital necessity. Thanks to all.
|
12-08-2015, 06:01 PM | #41 |
Tw200--excellent!
Drives: 2010 yaris..absolutely red. Join Date: Jun 2010
Location: Ohio
Posts: 209
|
I haven't started disassembly yet. Any clue as to why the mechanism / cable maufunctions ?. Is there a screw that needs a bit of lock tight applied?. TIA
|
12-08-2015, 06:03 PM | #42 |
Tw200--excellent!
Drives: 2010 yaris..absolutely red. Join Date: Jun 2010
Location: Ohio
Posts: 209
|
What the heck , the print on my last post is micro???.
|
12-08-2015, 07:25 PM | #43 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
No. The cable carrier assembly just snaps into place. The issue is that if the cable or what it drives binds and you force the cable, you pop the carrier out.
__________________
|
12-08-2015, 11:45 PM | #44 |
Tw200--excellent!
Drives: 2010 yaris..absolutely red. Join Date: Jun 2010
Location: Ohio
Posts: 209
|
Understood , thank you. When I eventually get too this , I'll look for binding points / lube points.
|
07-04-2016, 03:40 PM | #45 |
I've made a post!
Drives: 2009 Yaris Sedan Join Date: Jul 2015
Location: Ottawa, Canada
Posts: 1
|
Just Fixed my 2009 Yaris
Had the same problem and just fixed it thanks for the posts and pictures
|
10-22-2016, 11:07 AM | #46 |
I've made a post!
Drives: 2007 Yaris Sedan Join Date: Oct 2016
Location: USA
Posts: 1
|
Thanks everyone for the help and pictures. My issue ended up being the actual flap being stuck and not allowing it to move. Taking out the glove box, following the cable to figure out where the mechanism was and moving it manually cleared up whatever gunk had been accumulating and allowed the dial to move normally. Attached some pictures of that in case anyone was interested.IMG_0380.JPGIMG_0381.JPG
|
08-03-2017, 08:36 AM | #47 |
I've made a post!
Drives: Toyota Yaris HB (Vitz) Join Date: Aug 2017
Location: Sri Lanka
Posts: 1
|
Thanks a lot!! You have saved me my money and time at the garage.
Today I did it and only took 5 - 10 mins. |
06-26-2020, 05:40 AM | #48 |
I've made a post!
Drives: 2007 yaris 1.5 Join Date: Jun 2015
Location: portsmouth nh
Posts: 1
|
I’ve had this problem now for a while ...I HOPE THIS HELPS!!!
Inside my glove compartment where the flap is for the vent , it had a wiring harness cable that fell in front of the flap ... when the glove box is closed it was pushing against the wires that fell In front of the vent flap... Try opening the glove box and then try to flip the vent ... if it flips easy , pop the glove box out and check to see if there is anything impending the vent . That was my fix for a tight vent cable... |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
I broke my fan switch... HELP | *MAD DOG* | DIY / Maintenance / Service | 10 | 07-23-2009 09:47 AM |
Intake Systems Decision Maker.. | Blenjar | Performance Modifications | 25 | 09-15-2007 10:07 PM |