greddy intake manifold for yaris... - Toyota Yaris Forums

marcus · 08-18-2010, 05:58 PM

too bad site says only for turbo or supercharged application only..damn it.!

2manywheels · 08-18-2010, 06:11 PM

oohh.. Tasty bits!! That would go well with the blitz!!

Yoda · 08-18-2010, 07:22 PM

Quote:

Originally Posted by 2manywheels

oohh.. Tasty bits!! That would go well with the blitz!!

^ eh what?

kou · 08-18-2010, 07:40 PM

thats WEAPON R's manifold.

cdydjded · 08-18-2010, 08:59 PM

Quote:

Originally Posted by kou

thats WEAPON R's manifold.

I concur, it even says Weapon R on the piece of paper. Its also not for the Yaris, its for the xA/XB. You can tell by the flange where the tbody would go, its the wrong angle. That & WR never made one for the Yaris.....

marcus · 08-18-2010, 11:55 PM

yah ur right site said its yaris though..oh well..hope garm gets ours done soon before i get rid of my car..

cali yaris · 08-19-2010, 01:07 AM

if you re-weld and change the flange to match the Yaris TB, that would work just fine. No one so far has wanted to pay up the high price, then have to modify it further for the Yaris.

Nexus1155 · 08-19-2010, 01:35 AM

Shouldn't be too extreme modifications to get it to work for you. But its around $500 for a 10hp/tq gain.

For a little more than that you can run a safe NOS setup for 50hp gain

Or for 3-5x that amount depending on kit, you can have 70-90hp gain with a turbo.

I don't know if I can justify $500 for 10hp, when you can get those gains from tuning for cheaper.

cali yaris · 08-19-2010, 11:06 AM

^ That's $50 per hp, which in my tuning experience is relatively cheap. The bolt-ons come out to $75-100 per hp, if you really take a close look at it.

We've had this discussion a few times on here; really cheap power is possible only when you do it all yourself. I know there will always be differing opinions on how much $$/hp is reasonable. To each his own, right?

evoxgsr · 08-19-2010, 11:18 AM

Yea this certainly isn't like my EVO, $1500 can net you over 100 awhp. I'm trying to figure out what path to take with her car.

Nexus1155 · 08-19-2010, 12:11 PM

Yeah it is really opinionated. For $3000 on my car you can get 300hp extra from a stock baseline. $10/hp is dirt cheap i think.

Yoda · 08-19-2010, 07:56 PM

Quote:

Originally Posted by Nexus1155

Shouldn't be too extreme modifications to get it to work for you. But its around $500 for a 10hp/tq gain.

For a little more than that you can run a safe NOS setup for 50hp gain

Or for 3-5x that amount depending on kit, you can have 70-90hp gain with a turbo.

I don't know if I can justify $500 for 10hp, when you can get those gains from tuning for cheaper.

dont know if it will even net you 10hp

cali yaris · 08-19-2010, 08:58 PM

that design, IF the runners are calculated properly, should net 10-15 hp.

marcus · 08-19-2010, 09:07 PM

sweet so im assuming garms manifold will push atleast 10hp...nice cant wait..

08-19-2010, 01:07 AM	#7
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	if you re-weld and change the flange to match the Yaris TB, that would work just fine. No one so far has wanted to pay up the high price, then have to modify it further for the Yaris. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

08-19-2010, 11:06 AM	#9
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	^ That's $50 per hp, which in my tuning experience is relatively cheap. The bolt-ons come out to $75-100 per hp, if you really take a close look at it. We've had this discussion a few times on here; really cheap power is possible only when you do it all yourself. I know there will always be differing opinions on how much $$/hp is reasonable. To each his own, right? __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

08-19-2010, 11:18 AM	#10
evoxgsr Drives: evo x gsr Join Date: Jul 2010 Location: buffalo, NY Posts: 10	Yea this certainly isn't like my EVO, $1500 can net you over 100 awhp. I'm trying to figure out what path to take with her car. __________________ Speed Circuit UICP, CAI-BLOX velocity stack-Waste Gate mod 4 turns-TWM Short Shifter with 400gram knob-COBB AP, Turbo Inlet Hose-UR HFC, 4.5"intercooler, dual exit catback-Perrin Rear Swaybar-Enkei RPF1s 18x9.5 Black-HKS SSQV recirc-AMS downpipe, SS brake lines, LICP-Grimmspeed 3 port-boost gauge in ashtray-Rally Armour UR Mudflaps-Rexpeed CF HoodScoop, VG-Swift Springs- APR Front Splitter-AEM AFR Gauge

08-19-2010, 08:58 PM	#13
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	that design, IF the runners are calculated properly, should net 10-15 hp. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1nz-fe intake manifold , Xa ...	blacksandiegovitz	Performance Modifications	32	08-26-2010 01:06 PM
Custom Intake Manifold + Direct Port Nitrous	blacksandiegovitz	Performance Modifications	9	04-21-2010 07:05 PM
Yaris Intake Manifold	richardholdener	Performance Modifications	201	05-18-2009 11:58 AM
Intake Manifold Gasket?	Nexus1155	DIY / Maintenance / Service	6	11-18-2008 08:03 PM
Intake Systems Decision Maker..	Blenjar	Performance Modifications	25	09-15-2007 10:07 PM

08-18-2010, 06:11 PM	#2
2manywheels Drives: 09 YarHB Join Date: Feb 2009 Location: Canada Posts: 175	oohh.. Tasty bits!! That would go well with the blitz!!

08-18-2010, 07:40 PM	#4
kou View User's Garage Drives: 08 lb Join Date: Aug 2007 Location: nj Posts: 935	thats WEAPON R's manifold.

08-18-2010, 11:55 PM	#6
marcus toyota View User's Garage Drives: 2007 Yaris RS Blazed Join Date: Oct 2006 Location: toronto, canada Posts: 3,637	yah ur right site said its yaris though..oh well..hope garm gets ours done soon before i get rid of my car..

08-19-2010, 01:35 AM	#8
Nexus1155 Bathroom + Laptop = <3 Drives: Audi Join Date: Aug 2006 Location: Dorchester Posts: 1,009	Shouldn't be too extreme modifications to get it to work for you. But its around $500 for a 10hp/tq gain. For a little more than that you can run a safe NOS setup for 50hp gain Or for 3-5x that amount depending on kit, you can have 70-90hp gain with a turbo. I don't know if I can justify $500 for 10hp, when you can get those gains from tuning for cheaper.

08-19-2010, 12:11 PM	#11
Nexus1155 Bathroom + Laptop = <3 Drives: Audi Join Date: Aug 2006 Location: Dorchester Posts: 1,009	Yeah it is really opinionated. For $3000 on my car you can get 300hp extra from a stock baseline. $10/hp is dirt cheap i think.

08-19-2010, 09:07 PM	#14
marcus toyota View User's Garage Drives: 2007 Yaris RS Blazed Join Date: Oct 2006 Location: toronto, canada Posts: 3,637	sweet so im assuming garms manifold will push atleast 10hp...nice cant wait..