|
08-31-2015, 01:54 PM | #1 |
Drives: 2007 Yaris Join Date: Aug 2015
Location: SoCal
Posts: 2
|
Downshifting grinding
I just got a 2007 manual tranny yaris and it doesn't want to shift into 2nd unless I'm going below 25mph does a little grind. down shifts fine below that speed. Is this normal? going UP thru the gears no issues what so ever!
|
08-31-2015, 03:21 PM | #2 |
Drives: Toyota Yaris Sedan 09 STD Join Date: May 2009
Location: Puerto Rico
Posts: 1,227
|
My transmission was doing the same thing... It was the synchronizer that was worn.
__________________
|
08-31-2015, 03:28 PM | #3 |
Drives: 2007 Yaris Join Date: Aug 2015
Location: SoCal
Posts: 2
|
that's what I was thinking how much was it to fix ?
|
09-01-2015, 01:16 PM | #4 |
Drives: Toyota Yaris Sedan 09 STD Join Date: May 2009
Location: Puerto Rico
Posts: 1,227
|
I fixed mine with $350 because I bought an used Scion xB transmission and swapped the input, countershaft and differential to my transmission because the xB has a 4.31 final drive. I also did the whole job myself so no mechanic fees.
__________________
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Grinding noise when turning sharp right | roblobstuhh | DIY / Maintenance / Service | 14 | 07-08-2015 09:28 AM |
Grinding Noise While Turning | 09heavychevy | DIY / Maintenance / Service | 13 | 04-17-2015 03:54 PM |
Grinding noise in reverse | NickNickNick | DIY / Maintenance / Service | 14 | 03-15-2013 03:10 AM |
ABS?, Grinding Noise When Brakes Are Locked!??? | p0pNfr3sh | DIY / Maintenance / Service | 3 | 03-03-2010 05:22 AM |
Grinding sound from engine area | Thsplayer | DIY / Maintenance / Service | 0 | 01-03-2010 05:09 AM |