Limits of stock 1nzfe found once and for all. - Page 4 - Toyota Yaris Forums

Golddeenoh · 05-09-2012, 02:30 PM

Lexus = expensive Toyota. basically anything fancier than an Avalon is a Lexus.

pimp my yaris · 05-12-2012, 10:29 AM

Its time to get serious. Unfortunatly I am still waiting on one crank main bearing that is coming on a slow boat from Japan. These rods look incredibly strong.

cali yaris · 05-12-2012, 10:32 AM

^ I haven't been able to break one yet.

Focus_Sh1ft · 05-12-2012, 01:06 PM

Those are easily twice the size of the normal rods

changchewsoon · 05-12-2012, 01:33 PM

Pauter rods are definitely one of the best! I was trying to lay my hands on them when I first started my build but then somehow settled for Crower.

fnkngrv · 05-12-2012, 01:58 PM

Quote:

Originally Posted by ROCKLAND TOYOTA

SO your saying that lexus(TOYOTA) uses better grade materials on its vehicles??? you do know its all the same stuff right....

So in other words you are saying that the Lexus that comes stock handling over 2 times the horsepower is merely handling that because it has "bigger" parts due to larger displacement? If that is the case then I digress however I would be surprised and saddened.

Altitude · 05-12-2012, 02:35 PM

Quote:

Originally Posted by pimp my yaris

Its time to get serious. Unfortunatly I am still waiting on one crank main bearing that is coming on a slow boat from Japan. These rods look incredibly strong.

I LOVE shiny auto parts.

pimp my yaris · 05-15-2012, 08:38 PM

It looks like I should get my parts in by the end of the week. Time to start check list. Cylinder hone, check assembly lube, check, plsti-guage check. I am already looking at new turbo's and planing a 3" downpipe from hell. Not yet sure I can make it fit yet.

why? · 05-15-2012, 09:57 PM

Quote:

Originally Posted by fnkngrv

So in other words you are saying that the Lexus that comes stock handling over 2 times the horsepower is merely handling that because it has "bigger" parts due to larger displacement? If that is the case then I digress however I would be surprised and saddened.

the engineering and the math is different. But I'd be shocked if the alloys are different. Most of Toyota's v8's are even all aluminum now. Only the IS F and the LFA mention anything other than aluminum.

There is a reason people can push 30 or 40 more horsepower through the car easily, and only really experience problems at over double the stock horsepower.

There is also a reason the 2JZ can push out all sorts of insane power levels.

Blown_xa · 05-15-2012, 10:07 PM

Quote:

Originally Posted by pimp my yaris

It looks like I should get my parts in by the end of the week. Time to start check list. Cylinder hone, check assembly lube, check, plsti-guage check. I am already looking at new turbo's and planing a 3" downpipe from hell. Not yet sure I can make it fit yet.

Do it, 3" dp will fit, depends on turbo outlet location. Motor mount inserts help ease clearance worries.

TURBO YARIS · 05-15-2012, 10:17 PM

What did you mean by this " Most of Toyota's v8's are even all aluminum now. Only the IS F and the LFA mention anything other than aluminum."?

pimp my yaris · 05-15-2012, 11:49 PM

Quote:

Originally Posted by Blown_xa

Do it, 3" dp will fit, depends on turbo outlet location. Motor mount inserts help ease clearance worries.

What are these motor mount inserts you speak of? I could use something to stop the twisting. Im sure it will only get worse now on.

Blown_xa · 05-17-2012, 07:53 PM

Quote:

Originally Posted by pimp my yaris

What are these motor mount inserts you speak of? I could use something to stop the twisting. Im sure it will only get worse now on.

Check with energy suspension to see if they make them for the Yaris. That is what I use.

DentGuy · 05-19-2012, 07:29 PM

3/4 of the shortblock is back together.

pimp my yaris · 05-20-2012, 10:52 PM

Progress and set backs this weekend. I finally recieved all my engine bearings from Toyota on thursday. This weekend I set out to build this short block with a friend "Dent Guy" who built his own 1000hp 2jz supra motor. The instructions for the rods say U may need notch the block for the rod clearance on small bore engines. It took three attemps to remove enough material to clear the rods during crank rotation and still have the indicated 1/16 clearance remaining. And this also means cleaning the block and oil passages three times and R&R the crank three times. This took a long time. On final assembly the very last piston compression ring on the last piston broke while my friend was very gently sliding it over the top of the piston. THAT SuCKED. I was hoping to get this thing running by today or tomarrow. So now I will be ordering a ring set for one piston from CP on monday and hopfully having it shipped overnight to finish assembly on the short block.

pimp my yaris · 05-20-2012, 10:59 PM

more pics

pimp my yaris · 05-20-2012, 11:02 PM

more

pimp my yaris · 05-20-2012, 11:08 PM

This was my first attempt at notching the block. It was not nearly enough as seen by the assembled pic.

05-12-2012, 10:32 AM	#57
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	^ I haven't been able to break one yet. __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

05-12-2012, 01:33 PM	#59
changchewsoon View User's Garage Drives: Vios Turbo Join Date: Feb 2009 Location: Malaysia Posts: 190	Pauter rods are definitely one of the best! I was trying to lay my hands on them when I first started my build but then somehow settled for Crower. __________________ 454 whp, 1.7 bar boost, pump gas, water/meth. 501 whp, 2.2 bar boost, pump gas + avgas, no water/meth. www.viosturbo.com - World's first 500 WHP 1NZ-FE

05-09-2012, 02:30 PM	#55
Golddeenoh Takes corners too fast! View User's Garage Drives: Absolute Red 2009 Yaris HB Join Date: Apr 2012 Location: Columbia, SC Posts: 830	Lexus = expensive Toyota. basically anything fancier than an Avalon is a Lexus.

05-12-2012, 01:06 PM	#58
Focus_Sh1ft Drives: 08 Yaris Turbo; 06 tC Turbo Join Date: Jan 2010 Location: New Jersey Posts: 875	Those are easily twice the size of the normal rods

05-15-2012, 08:38 PM	#62
pimp my yaris C'est la vie Drives: 2009 2 door hatchback Join Date: Aug 2009 Location: chicago Posts: 482	It looks like I should get my parts in by the end of the week. Time to start check list. Cylinder hone, check assembly lube, check, plsti-guage check. I am already looking at new turbo's and planing a 3" downpipe from hell. Not yet sure I can make it fit yet.

05-15-2012, 10:17 PM	#65
TURBO YARIS Drives: Yaris Join Date: Jul 2011 Location: USA Posts: 100	What did you mean by this " Most of Toyota's v8's are even all aluminum now. Only the IS F and the LFA mention anything other than aluminum."?

05-19-2012, 07:29 PM	#68
DentGuy Drives: Supra Join Date: May 2012 Location: Algonquin Posts: 9	3/4 of the shortblock is back together.