Perrin Crank Pulley - Toyota Yaris Forums

IntensePower · 06-20-2006, 02:14 PM

If the Yaris is using the same motor as the xa and xb the perrin crank pulley could work.

Just FYI

*Chris07LB* · 06-20-2006, 07:14 PM

Quote:

Originally Posted by IntensePower

If the Yaris is using the same motor as the xa and xb the perrin crank pulley could work.

Just FYI

I have asked this many times, mainly over @ ScionLife.com, but what else will fit?

heylookitsjames · 06-21-2006, 02:12 AM

I would assume any of the actual engine parts will fit, be it spark plugs or cams (if they even exist for the scions), but ancillaries may be slghtly different due to chassis design and engine bay layout (like intakes).

What I would like to know is if the suspension components are compatable or not...

why? · 06-21-2006, 10:47 AM

They're not. The suspension is different in the yaris. The pickup points are slightly different.

IntensePower · 06-21-2006, 05:41 PM

as mentioned in one of the tein threads they are releasing coilovers in september for suspension.
besides some of the cusco parts i do not know.

if the transmission is the same the perrin short shifter might work.(i'm pretty sure it is) the perring SS should work and they are throw adjustable.

We hope to get a Yaris in our shop soon to look into parts fitment with more detail.

soros151 · 07-07-2006, 12:28 AM

I think there even is a strocker kit for xBs, At least I heard about the development on them. Don't know how much will they upper too.

ZPIracing · 02-22-2007, 12:08 PM

The xB pulley will not work. Well it might but would not be ideal. The Yaris uses a single belt design while the xB runs two belts off the crank pulley.

06-20-2006, 02:14 PM	#1
IntensePower Drives: 350z, supra, xb, 240sx Join Date: May 2006 Location: Gilbert, AZ Posts: 9	Perrin Crank Pulley If the Yaris is using the same motor as the xa and xb the perrin crank pulley could work. Just FYI __________________ Intensepower 480-926-8797 www.intensepower.com

06-21-2006, 10:47 AM	#4
why? Only Happy When it Rains View User's Garage Drives: Yaris LB Join Date: Jan 2006 Location: harnett county NC Posts: 4,097	They're not. The suspension is different in the yaris. The pickup points are slightly different. __________________ Colin Chapman disciple

06-21-2006, 05:41 PM	#5
IntensePower Drives: 350z, supra, xb, 240sx Join Date: May 2006 Location: Gilbert, AZ Posts: 9	as mentioned in one of the tein threads they are releasing coilovers in september for suspension. besides some of the cusco parts i do not know. if the transmission is the same the perrin short shifter might work.(i'm pretty sure it is) the perring SS should work and they are throw adjustable. We hope to get a Yaris in our shop soon to look into parts fitment with more detail. __________________ Intensepower 480-926-8797 www.intensepower.com

07-07-2006, 12:28 AM	#6
soros151 Another question... :D Drives: Scion tC 06 Join Date: Jul 2006 Location: Puerto Rico Posts: 70	I think there even is a strocker kit for xBs, At least I heard about the development on them. Don't know how much will they upper too. __________________ One tire nearer to my goal

06-21-2006, 02:12 AM	#3
heylookitsjames maintenance of momentum View User's Garage Drives: 2007 5spd 3dr Join Date: Jun 2006 Location: Riverside CA Posts: 129	I would assume any of the actual engine parts will fit, be it spark plugs or cams (if they even exist for the scions), but ancillaries may be slghtly different due to chassis design and engine bay layout (like intakes). What I would like to know is if the suspension components are compatable or not...

02-22-2007, 12:08 PM	#7
ZPIracing Drives: Scions Join Date: Feb 2007 Location: Louisville, KY Posts: 55	The xB pulley will not work. Well it might but would not be ideal. The Yaris uses a single belt design while the xB runs two belts off the crank pulley.