TB dyno results

[2bad4u]

The dyno result for 06 Vitz RS 5spd. only mod are a BroSpeed Bosal axle-back muffler and grounding kit (home made).
Max Power = 101.13 Max Torque 93.44
temp outside was 78F using 91 octane.

[ROCKLAND TOYOTA]

BROSPEED is still around? i had their H/E on my del sol and it was a nice setup. BUT that was back in 98' and i haven't heard anything about them recently.

[Thirty-Nine]

Originally Posted by ROCKLAND TOYOTA

BROSPEED is still around? i had their H/E on my del sol and it was a nice setup. BUT that was back in 98' and i haven't heard anything about them recently.

I had a Brospeed on my 98 Civic, too. I bought it in 2004, I think. Well made, inexpensive, too.

[EdgarTRD1.8]

Which TB you put on it??? I know someone told it but check if the TB port match because you'll have a restriction over there, remember it will suck air from a 1.75" or something like that in the stock port of the 1nz vs if you port to 2.25" like the 1zz or the TB you used. If you don't port will not gain too much.

[YarisPR]

Originally Posted by EdgarTRD1.8

Which TB you put on it??? I know someone told it but check if the TB port match because you'll have a restriction over there, remember it will suck air from a 1.75" or something like that in the stock port of the 1nz vs if you port to 2.25" like the 1zz or the TB you used. If you don't port will not gain too much.

Es el throttle de Corolla o Matrix 1.8 no XRS

[EdgarTRD1.8]

Ok yo estoy haciendo una ara~a en aluminio pa ese throttle despues te envio par de pics... y estaba pensando hacer spacers en plastico y aluminio...

[YarisPR]

Originally Posted by EdgarTRD1.8

Ok yo estoy haciendo una ara~a en aluminio pa ese throttle despues te envio par de pics... y estaba pensando hacer spacers en plastico y aluminio...

Me avisas cm va ese proyecto

[2bad4u]

Originally Posted by Thirty-Nine

I had a Brospeed on my 98 Civic, too. I bought it in 2004, I think. Well made, inexpensive, too.

I paid about US$112 installed, great sound will post youtube asap, just trying to do the tb swap this weekend hoping to pickup a 1zz tb at any of the local used parts shops if not I'll get it from Garm, set up with the swap already.