|
|
08-01-2007, 02:23 PM | #1 |
Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006
Location: USA
Posts: 1,097
|
NEW GROUP BUY: NST WP-Lite & ALT-Lite Pulley Kit (NonStopTuning)
Hi everyone,
Mike here again... I run this little company that one or two of you may have heard of, called NST. You asked for it and now here it is This Group Buy will offer the YW community our WP-Lite & ALT-Lite Kit (NST09025K). These NST Pulleys are lightweight versions of the OEM alternator and water pump pulleys, and are roughly 60% lighter than the OEM pulleys they replace. You guys will have a choice of three colors: Red, Blue, Graphite Gray. More actual photographs to come very soon. The results of such a modification are: an improvement in throttle response, especially when paired with the CR-Lite (NST09158) Crank Pulley, an upward shift in horsepower and torque curves accross the RPM band, better gas mileage, and more BLING! This GB will require roughly 14 people within the next 14 days. Each WP-Lite & ALT-Lite Pulley Kit (NST09025K) will cost $140 SHIPPED anywhere in the USA or Canada and will ship via USPS services. Payments can be made using the services of PayPal, Debit, or Credit cards; we will have detailed instructions for you about this as we come closer to the close of this GB. (Aug 15, 2007) We will begin the production process on this GB as soon as the closing date has arrived and will have some sweet pulleys to ship out to you guys in late September or early October. Exact ETAs will come when we reach the closing date. As usual, important updates will be added to this thread on this first page, so please continue to check this page for updates... Once again, it is a pleasure to be such a recognized name in your community and I hope we can bring you even more great products in the future. You guys are welcome to browse our site, send us Email, or look for us on AIM at the screen name NSTonAIM should you have any questions. I look forward to hearing from any of you. UPDATE 08-05-07: The closing date for this GB is AUG 15. We will take payments the same way that we did for previous group buys. You will have a window of about 7 to 10 days to submit your payment, most likely sometime between AUG 15 - 25. We have already passed our 14 member requirement, so this GB is now official. We will keep the list open until the 15th so that more people can take advantage of the savings. Please stay tuned and check this page for more updates! UPDATE 08-13-07: Thanks again everyone for all your enthusiasm and your commitment to this GB. We have added a special page for this GB to our website. Please use this page to submit your payment, PayPal or any Credit Card, and provide your shipping address. MSRP for this kit is listed at $160. You will be charged $130 + $10 shipping = $140 shipped... --- http://www.nonstoptuning.com/pKitToyYarisGB.htm --- Those of you who wish to add a CR-Lite Crank Pulley or Short Shift Kit can do so on this same page, and will be charged a discounted shipping rate for your order. --- BE SURE TO INCLUDE YOUR COLOR (RED, BLUE, GRAY) AND YW SCREEN NAME WITH YOUR ORDER IN THE OPTIONAL COMMENT BOX DURING CHECK OUT --- This page will be available between August 13 - August 28 to allow you sufficient time to submit your payment and solidify your palce on the list. We will begin production on these pieces once payments have been processed and will ship your packages out via USPS Priority Mail as soon as possible. Our current ETA for completion and shipment is OCTOBER 2007. We will update this ETA once all payments have been received and processed. Thanks again everyone, we certainly do appreciate all your enthusiasm and support!!! I will add [PAID] taggs to your names as your payments are received and processed. Please continue to check this page for updates... 1. ChinoCharles PAID 2. Vanderkitten (RED) PAID 3. Vanderkitten (RED) PAID 4. ism3t (red) 5. RedToyotaYaris (red) PAID 6. Black Yaris (blue) PAID 7. Doc Zaius (red) PAID 8. Astroman (red) PAID 9. REZNUNT + crank pulley (all red please) PAID 10. sdmf (red) PAID 11. bubaa (red) 12. Terrorize (blue) PAID 13. tmyers82 (Blue) PAID 14. lostmind (gray) PAID 15. CASTREX (Blue) PAID 16. me_ver51 (gray) PAID 17. stevencyt (red) PAID 18. cali yaris (red) PAID 19. WD-40 (red) + crank pulley PAID 20. WD-40 (red) + crank pulley (yes 2 sets) PAID 21. Alphafox (blue) PAID 22. YarisGuy (red) PAID 23. luckydlb (blue) PAID 24. tk-421 (gray) + crank pulley PAID 25. Sabretooth (red) + crank pulley 26. RUBBERDIPSTICK (gray) PAID 27. TheCutsman (RED) 28. 07TypeS (Gray) 29. dngz (Gray) PAID 30. cdmyaris (red) PAID 31. jerkratt (Blue) PAID 32. Eijikikimaru + Crank pully (All Red) PAID 33. vacantj (red) + crank pulley (Red) PAID 34. eco (Blue) PAID 35. redglare45 (gray) PAID UPDATE 08-27-07: Most members have submitted payment and have solidified their spots on this GB. Thanks everyone for the quick payments, we appreciate it. These pieces will go into production later this week and we expect to have them available for shipping during the first week of OCTOBER. I will keep you updated over the next few weeks. UPDATE 10-01-07: Pulleys are now in the works and will receive anodizing over the next 7-10 days. After this process pulleys will go through the final round of testing for proper balance and fitment. Our current ETA is OCTOBER 15. All packages will ship via USPS Priority Mail and USPS Global Express Mail. Keep an eye on your Email accounts for Delivery Confirmation Numbers on or around OCTOBER 15 everyone!!! Last edited by NonStopTuning; 10-01-2007 at 03:47 PM. |
08-01-2007, 02:32 PM | #2 |
Drives: 07 Yaris LB Absolute RED Join Date: Apr 2007
Location: Boston, MA
Posts: 884
|
wow!!!!! i gotta start saving...ill take red please
__________________
v |
08-01-2007, 02:34 PM | #3 |
sign me up *red* please
|
|
08-01-2007, 02:35 PM | #4 |
der Zeck
Drives: '05 Audi A4 1.8t quattro Join Date: Sep 2006
Location: Toledo, OH
Posts: 5,231
|
I am so #1 to jump on this one... grrrr... I will delete your post so I am first DAMN IT
Blue pulley set for bulley moderator pushing to the front of the line
__________________
|
08-01-2007, 02:35 PM | #5 |
Drives: 2007 Yaris HB Join Date: Apr 2007
Location: my own little world
Posts: 1,256
|
Installation...is it simple?
If I were to replace just one of these, which would be most beneficial? Help me Jebus, I can't stop modding! |
08-01-2007, 06:35 PM | #6 | |
Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006
Location: USA
Posts: 1,097
|
Quote:
The WP-Lite and ALT-Lite pulleys will be sold as a pair and will not be offered individually. I don't recommend installing one without the other as the gains from just one would be minimal. They are meant to be used as a pair for optimum weight reduction in the rotating assembly. Join the GB and get both at a considerable discount, you won't be disappointed. |
|
08-01-2007, 06:38 PM | #7 |
I used to have 1700 posts
|
its as simple as installing the crank pulley right?
|
08-01-2007, 08:54 PM | #8 |
Drives: Yaris 3 Door, 04 WRX, 69 Lotus Join Date: Apr 2007
Location: norcal
Posts: 128
|
Should be much simplier, unless there are clearance issues OR your hands aren't small. ;)
More bolts, but far less torque. On my DSM, the WP pulley was tough cause it was kinda wedged between the engine and mount lol. Will the colours match your other products? And a 2nd to the underdrive-ness question... |
08-01-2007, 10:46 PM | #9 | |
Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006
Location: USA
Posts: 1,097
|
Quote:
Colors will match. Same shades of Red, Blue, and Graphite Gray. As stated before, these are part of our -Lite series. These pulleys are OEM diameter pulleys. In my near decade of working nearly 24/7 with pulleys, I have found that Underdriving is properly done when it can be done via an Underdrive Crank Pulley. As we have discussed before, building an Underdrive Crank Pulley for the Yaris has proven to be rather difficult because of the way the crank case has been designed on this engine. It is something that we are looking into... These WP-Lite and ALT-Lite Pulleys should be a nice addition to the CR-Lite Crank Pulley many of you already own. You asked for them, and we did the R&D for them. Now it is time for you guys to show real support for your favorite aftermarket company |
|
08-04-2007, 02:25 AM | #10 |
Toyota Newb!!
Drives: Yaris S Sedan w/ Aero Package! Join Date: Jun 2006
Location: Toronto
Posts: 228
|
There ya go! Ok..we are passed 14 people...so price will be even LOWER right?? LOL...j/k..
OK...but seriously...START collecting $$ so you can START shipping! Heh heh...can you tell i really want this?? How's that for showing some NST support? Oh yeah...think you can put in some NST decals/stickers in my order? I didn't get anything with the CR-lite. |
08-04-2007, 02:59 AM | #11 |
0. ChinoCharles
1. nqd (red) 2. RedToyotaYaris (red) p. Black Yaris (blue) 4. Doc Zaius (red) 5. OxyG3nE (blue) 6. Astroman (red) 7. REZNUNT (red) 8. sdmf (red) 9. bubaa (red) 10. Terrorize (blue) 11. Kurokoma-kun (blue) 12. Jerkratt (Blue) my 07 maybe dead but the 08's coming! 13. tmyers82 (Blue) 14. lostmind (undecided, gray maybe?) 15. CASTREX (Blue) 16. me_ver51 (gray) |
|
08-04-2007, 03:07 AM | #12 |
Drives: '07 Blazing Blue LB, '09 Jetta Join Date: May 2007
Location: SoCal
Posts: 413
|
damn..you guys really makin me wanna buy,
but first, what this thing do exactly??...give us in simple word plz. more power?...more torque?
__________________
current: '07 Yaris LB - '09 VW Jetta ex: '06 Beetle S(19x8.5 Audi A8) - MK4 GLi BMP(18x8 OZ, K04) - '03 GTi(17x7.5 Ronal, APR93) - '01 GLS - '88 GTi - '86 GTi - '83 GTi |
08-04-2007, 01:41 PM | #13 | |
Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006
Location: USA
Posts: 1,097
|
Quote:
These WP-Lite and ALT-Lite Pulleys are roughly 60% lighter than the OEM pulleys they replace. The results of such a modification are: an improvement in throttle response, especially when paired with the CR-Lite (NST09158) Crank Pulley, an upward shift in horsepower and torque curves accross the RPM band, better gas mileage, and more BLING! |
|
08-15-2007, 08:21 PM | #14 |
Modded Moderator
Drives: 07 Toyota Yaris, 71 Galaxie Join Date: Mar 2007
Location: Wenatchee, WA
Posts: 3,670
|
Woohoo! PAID!
|
08-15-2007, 08:44 PM | #15 |
Drives: 07 Yaris Liftback Join Date: Jul 2007
Location: California, SoCal
Posts: 161
|
paid
__________________
Toyota Yaris FTFW!! |
08-15-2007, 10:59 PM | #16 |
Drives: MR2 Spyd/Type R/Yaris/Civic Si Join Date: Feb 2007
Location: Ottawa
Posts: 479
|
Hey,
wow I'm just finding this now provided the 1NZFE hasn't changed (I have an echo) I'd like the two pulleys in blue please (I already have the crank pulley) , I'll PM you about payment etc... campbellwill@hotmail.com Thanks Will |
08-16-2007, 01:46 AM | #17 | |
Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006
Location: USA
Posts: 1,097
|
Quote:
Thank you very much |
|
08-17-2007, 12:46 PM | #18 |
Modded Moderator
Drives: 07 Toyota Yaris, 71 Galaxie Join Date: Mar 2007
Location: Wenatchee, WA
Posts: 3,670
|
NST, could you please update the paid list? I paid, but the list shows I haven't.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY: Nonstop Tuning CR-Lite Pulley | ChinoCharles | DIY / Maintenance / Service | 121 | 02-03-2010 05:41 AM |
NEW GROUP BUY: NST Short Shift Kit (NonStopTuning) | NonStopTuning | NonStopTuning | 245 | 08-28-2007 03:53 PM |
NEW GROUP BUY: Yaris NST Crank Pulley (NonStopTuning) | NonStopTuning | NonStopTuning | 224 | 05-17-2007 07:40 AM |
GROUP BUY - NST Crank Pulley | riceboy | Items for Sale by private party | 35 | 12-30-2006 04:03 PM |
KLight HID Conversion Group Buy!! $165.00 shipped!! | JRT lighting | Sponsors Classifieds Area | 4 | 11-20-2006 10:47 PM |