|
06-08-2010, 04:54 PM | #1 |
aka SDMF
|
cel-maf sensor
so lately i been popping a cel p0101 which i looked up and it was my maf sensor acting up. i am currently running a blitz sc, 1zz fuel injectors, fujita cai. i have had no problems running this setup for almost a year. now i am always throwing a code, i have cleaned the sensor multiple times and it just seems to throw this code alot. is it time to buy a new maf? i have also noticed that the oring is wearing out, would that play a big factor? thanks for the help.
|
06-08-2010, 06:19 PM | #2 |
Drives: 2008 HB, A/T, Power W/L/M Join Date: Oct 2008
Location: LI, New Yawk
Posts: 2,063
|
I've been buying mission critical spares little by little.
Cheap insurance.....
__________________
Never take eyes off opponent - Bruce Lee |
06-08-2010, 07:07 PM | #3 |
aka SDMF
|
yeah ill be dropping by the dealership later and picking up one
|
06-09-2010, 09:02 AM | #4 |
Drives: . Join Date: Apr 2007
Location: .
Posts: 1,828
|
how much for one of these sensors?
|
06-19-2010, 08:06 PM | #5 |
aka SDMF
|
update, so i bought a new maf and 1 week later still popped a cel, im thinking i should just put my stock airbox in to test if it the cai, its weird since i had the cai for almost 3 years and this is happening.
|
06-19-2010, 11:40 PM | #6 |
Slowy getting there
|
Do you have any pending codes?
__________________
|
06-19-2010, 11:44 PM | #7 |
aka SDMF
|
p0101, thats it, im thinking of putting back 1nz injectors or changing back to stock airbox, the last mod i did was changing the injectors. so i will start with that i guess
|
06-19-2010, 11:53 PM | #8 |
Slowy getting there
|
What type of code reader are you using?
__________________
|
06-19-2010, 11:59 PM | #9 |
aka SDMF
|
i have a scangauge, and my buddy used some other highend reader, not sure of the brand but he said it the same as the techs use.
|
06-20-2010, 12:10 AM | #10 |
Slowy getting there
|
Get your friends again and see if you have any pending codes. My scanner at work can read them
__________________
|
07-12-2010, 02:32 PM | #11 |
Drives: 2D Grey Hatchback Join Date: Dec 2009
Location: NY
Posts: 4
|
I've had the same problem. I put in a K&N cai and after about 200 miles the cel came on with the P0101 code. I called K&N and they couldn't explain it, they just kept saying there must be vacuum leak somewhere but I put hose clamps on every vacuum line and checked all the connections on the cai but no luck. I just drive it now with the light on.
|
07-12-2010, 05:17 PM | #12 |
Banned
Drives: 07 sedan Join Date: Mar 2010
Location: new mexico
Posts: 292
|
For the fujita, search on MI forums for fujita fail. Make sure the support didn't rip a hole in your pipe as has happened to 2 users.
Also, on my SRI, I used a silicon sealant in between the pipe and the MAF. I've yet to see a CEL or have even a second of rough idle or anything. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
pieza para el sensor maf | paveovisual | Central and South America | 17 | 09-10-2012 04:34 PM |
The "let's brainstorm how to make a piggyback work" thread | eTiMaGo | Forced Induction Forum | 83 | 08-17-2011 03:54 PM |
WTB 2 screws hold down MAF sensor | detroiter | Willing to Buy by private party | 7 | 03-12-2010 03:35 PM |
WTB stock maf sensor screws | Grandieri | Willing to Buy by private party | 2 | 04-30-2009 11:47 AM |
CEL Issue via MAF Sensor, Thoughts? | The Architect | Performance Modifications | 8 | 03-29-2009 11:50 PM |