New NST Pulleys for the TS - Toyota Yaris Forums

NonStopTuning · 11-21-2008, 02:09 PM

UPDATE

NEW NST Underdrive Crank Pulley for the Yaris TS 1.8 and Scion xD!
http://www.nonstoptuning.com/pKitToySciXD.html

Now in stock and ready for immediate shipping.
These pulleys are AWESOME!!!

CASTREX · 11-21-2008, 02:33 PM

How could you not love NST!!!

When can I have mine?

edit:Available on Jan-09

Would Garm carry these?

NonStopTuning · 12-01-2008, 06:50 PM

UPDATE

NEW NST GB ON ScionLife...
http://www.scionlife.com/forums/viewforum.php?f=277

And before we get this question, let me go ahead and address this issue....

I know that originally we talked about doing a crank pulley and alternator pulley... we have since chosen to go a different route...

We will offer our 10% Underdrive Crank Pulley as a solo item. This pulley is roughly 70% lighter than the OEM pulley and will provide the best mix of performance and daily drivability for our customers. You will see better HP and TQ delivery, better throttle response, better gas mileage, and absolutely NO headaches or worries about accessory output.

The Alternator Pulley has been scratched, and will likely not be offered as a production item for the xD. This is due to the fact that removal of the alternator, and installation of a new pulley, have shown to be a big pain! Spending the great deal of time and effort on this install, or paying a shop for this installation, would likely turn most people away from this mod. In short... an alternator pulley is probably not worth the effort for 90% of you out there.

So get ready to pick up one of our crank pulleys and enjoy the great benefits at a rock bottom price!!!

CASTREX · 12-01-2008, 07:28 PM

I already signed for 2 pulleys!

Mike,

I don't require INTL shipping for my pulleys but all the other TS owners are in Europe. I guess they will be interested in knowing if you will be able to ship to them. And roughly how bad is the shipping to Europe.

NonStopTuning · 12-02-2008, 12:31 AM

We can definitely ship to any country in Europe. USPS Global Express Mail is roughly $20 to $25 for such a package and is calculated by our online shopping cart at the time of each order.

Rafterman · 12-02-2008, 06:36 AM

yeeehaaaa...sounds good

Yaris Palme · 12-02-2008, 08:59 AM

sounds good.

can we also order this vom microimage?? i need also parts from them...

CASTREX · 12-02-2008, 10:45 AM

Since this is a group buy, in order to have access to the special (introduction) price you need to order from NST.

How ever, you could tie off with Mike from NST and have your Pulley sent to Garm. USPS shipping within the USA is pretty cheap.

Then Garm could consolidate the pulley along with all the other parts you are buying from him.

CASTREX · 12-02-2008, 10:50 AM

I'm already signed for the group buy in the official Thread over at Scionlife.com but for all the TS owners from Yaris World we could start a list over at this thread.

Yaris Palme, Rafterman
Let me know if you would like to be added to the Group buy.

The last date to join is Dec-15 and the payment should be submitted soon after that date. The pulleys will be shipped 6 wks later. (probably by the end of January)

Yaris Palme · 12-02-2008, 11:45 AM

i think i will buy one.... but 15.dez.... it is to early for me.......
and i also will test my paypal account. i don´t know if it really work.

CASTREX · 12-02-2008, 12:37 PM

I'm sure you can pay with a credit card as well.

According to Mike the GB finishes on Dec-15 (That's the last day to join the group) Then NSt will give 10 extra days to submit all payments.

In the worst case you will be able to buy it later. It will cost $118 instead of $99. but other than that no big deal...

Yaris Palme · 12-02-2008, 01:14 PM

Quote:

Originally Posted by CASTREX

I'm sure you can pay with a credit card as well.

According to Mike the GB finishes on Dec-15 (That's the last day to join the group) Then NSt will give 10 extra days to submit all payments.

In the worst case you will be able to buy it later. It will cost $118 instead of $99. but other than that no big deal...

not everybody has a creditcard ;) i don´t have one, because i don´t need it, here in Austria.

NonStopTuning · 12-02-2008, 02:29 PM

PayPal would be the easiest way for international customers to place an order with us.

Thank you everyone, I appreciate it!

NonStopTuning · 12-03-2008, 02:07 AM

PS. Thank you for all your help and support Mr. CASTREX, we certainly do appreciate it very much!

CASTREX · 12-08-2008, 02:21 PM

Bump!

No more interested people on the pulley here?

We are close to the deadline for the Group buy and we still need 5 more people to join.

constantin · 12-08-2008, 03:21 PM

I am interested but the only thing that worries me is the instalation. How ... ?

Yaris Palme · 12-08-2008, 03:32 PM

like to change the V-belt.

unstiff the compressor of the aircond.
unstiff the alternator
pull of the stock pulley.

so i think. pls correct me, if i write some wrong.

CASTREX · 12-08-2008, 04:08 PM

You got it right.

You need to loose the alternator bolt to loose the belt.

The you can remove the crank pulley by removing the right front wheel.

Is really simple. The only thing to consider is that removing the Crank pulley bolt is going to be really hard if you do it by hand.
An Air/Impact gun/wrench would be highly recommended. With the right tools it should be a mater of 1/2 an hour.

Here is a link with a small write up and some pictures so you have a better idea of the installation:
http://www.scionlife.com/forums/viewtopic.php?t=243432

11-21-2008, 02:09 PM	#1
NonStopTuning Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006 Location: USA Posts: 1,097	New NST Pulleys for the TS UPDATE NEW NST Underdrive Crank Pulley for the Yaris TS 1.8 and Scion xD! http://www.nonstoptuning.com/pKitToySciXD.html Now in stock and ready for immediate shipping. These pulleys are AWESOME!!! __________________ MIKE @ NST www.NonStopTuning.com Last edited by NonStopTuning; 03-05-2009 at 04:35 PM.

11-21-2008, 02:33 PM	#2
CASTREX Who said Yaris was slow? View User's Garage Drives: Yaris T-Sport 2008 Join Date: Nov 2006 Location: Costa Rica Posts: 1,287	How could you not love NST!!! When can I have mine? edit:Available on Jan-09 Would Garm carry these? Last edited by CASTREX; 11-21-2008 at 03:36 PM. Reason: did not see availability date on the news...

12-01-2008, 06:50 PM	#3
NonStopTuning Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006 Location: USA Posts: 1,097	UPDATE NEW NST GB ON ScionLife... http://www.scionlife.com/forums/viewforum.php?f=277 And before we get this question, let me go ahead and address this issue.... I know that originally we talked about doing a crank pulley and alternator pulley... we have since chosen to go a different route... We will offer our 10% Underdrive Crank Pulley as a solo item. This pulley is roughly 70% lighter than the OEM pulley and will provide the best mix of performance and daily drivability for our customers. You will see better HP and TQ delivery, better throttle response, better gas mileage, and absolutely NO headaches or worries about accessory output. The Alternator Pulley has been scratched, and will likely not be offered as a production item for the xD. This is due to the fact that removal of the alternator, and installation of a new pulley, have shown to be a big pain! Spending the great deal of time and effort on this install, or paying a shop for this installation, would likely turn most people away from this mod. In short... an alternator pulley is probably not worth the effort for 90% of you out there. So get ready to pick up one of our crank pulleys and enjoy the great benefits at a rock bottom price!!! __________________ MIKE @ NST www.NonStopTuning.com

12-02-2008, 12:31 AM	#5
NonStopTuning Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006 Location: USA Posts: 1,097	We can definitely ship to any country in Europe. USPS Global Express Mail is roughly $20 to $25 for such a package and is calculated by our online shopping cart at the time of each order. __________________ MIKE @ NST www.NonStopTuning.com

12-02-2008, 08:59 AM	#7
Yaris Palme MAZDASPEED3 View User's Garage Drives: MazdaSpeed3 Join Date: Aug 2006 Location: Austria Posts: 186	sounds good. can we also order this vom microimage?? i need also parts from them... __________________

12-01-2008, 07:28 PM	#4
CASTREX Who said Yaris was slow? View User's Garage Drives: Yaris T-Sport 2008 Join Date: Nov 2006 Location: Costa Rica Posts: 1,287	I already signed for 2 pulleys! Mike, I don't require INTL shipping for my pulleys but all the other TS owners are in Europe. I guess they will be interested in knowing if you will be able to ship to them. And roughly how bad is the shipping to Europe.

12-02-2008, 06:36 AM	#6
Rafterman Drives: Yaris II TS 133 hp Join Date: Oct 2006 Location: Zwickau/Germany Posts: 30	yeeehaaaa...sounds good

12-02-2008, 10:45 AM	#8
CASTREX Who said Yaris was slow? View User's Garage Drives: Yaris T-Sport 2008 Join Date: Nov 2006 Location: Costa Rica Posts: 1,287	Since this is a group buy, in order to have access to the special (introduction) price you need to order from NST. How ever, you could tie off with Mike from NST and have your Pulley sent to Garm. USPS shipping within the USA is pretty cheap. Then Garm could consolidate the pulley along with all the other parts you are buying from him.

12-02-2008, 10:50 AM	#9
CASTREX Who said Yaris was slow? View User's Garage Drives: Yaris T-Sport 2008 Join Date: Nov 2006 Location: Costa Rica Posts: 1,287	I'm already signed for the group buy in the official Thread over at Scionlife.com but for all the TS owners from Yaris World we could start a list over at this thread. Yaris Palme, Rafterman Let me know if you would like to be added to the Group buy. The last date to join is Dec-15 and the payment should be submitted soon after that date. The pulleys will be shipped 6 wks later. (probably by the end of January)

12-02-2008, 11:45 AM	#10
Yaris Palme MAZDASPEED3 View User's Garage Drives: MazdaSpeed3 Join Date: Aug 2006 Location: Austria Posts: 186	i think i will buy one.... but 15.dez.... it is to early for me....... and i also will test my paypal account. i don´t know if it really work. __________________

12-02-2008, 12:37 PM	#11
CASTREX Who said Yaris was slow? View User's Garage Drives: Yaris T-Sport 2008 Join Date: Nov 2006 Location: Costa Rica Posts: 1,287	I'm sure you can pay with a credit card as well. According to Mike the GB finishes on Dec-15 (That's the last day to join the group) Then NSt will give 10 extra days to submit all payments. In the worst case you will be able to buy it later. It will cost $118 instead of $99. but other than that no big deal...

12-02-2008, 02:29 PM	#13
NonStopTuning Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006 Location: USA Posts: 1,097	PayPal would be the easiest way for international customers to place an order with us. Thank you everyone, I appreciate it! __________________ MIKE @ NST www.NonStopTuning.com

12-03-2008, 02:07 AM	#14
NonStopTuning Drives: NST CARS: S13 AE86 ANT10 AW11 Join Date: Dec 2006 Location: USA Posts: 1,097	PS. Thank you for all your help and support Mr. CASTREX, we certainly do appreciate it very much! __________________ MIKE @ NST www.NonStopTuning.com

12-08-2008, 02:21 PM	#15
CASTREX Who said Yaris was slow? View User's Garage Drives: Yaris T-Sport 2008 Join Date: Nov 2006 Location: Costa Rica Posts: 1,287	Bump! No more interested people on the pulley here? We are close to the deadline for the Group buy and we still need 5 more people to join.

12-08-2008, 03:21 PM	#16
constantin VVT-i Addict View User's Garage Drives: Yaris TS Join Date: Oct 2008 Location: Romania/Craiova Posts: 67	I am interested but the only thing that worries me is the instalation. How ... ? __________________ Redline maniac.

12-08-2008, 03:32 PM	#17
Yaris Palme MAZDASPEED3 View User's Garage Drives: MazdaSpeed3 Join Date: Aug 2006 Location: Austria Posts: 186	like to change the V-belt. unstiff the compressor of the aircond. unstiff the alternator pull of the stock pulley. so i think. pls correct me, if i write some wrong. __________________

12-08-2008, 04:08 PM	#18
CASTREX Who said Yaris was slow? View User's Garage Drives: Yaris T-Sport 2008 Join Date: Nov 2006 Location: Costa Rica Posts: 1,287	You got it right. You need to loose the alternator bolt to loose the belt. The you can remove the crank pulley by removing the right front wheel. Is really simple. The only thing to consider is that removing the Crank pulley bolt is going to be really hard if you do it by hand. An Air/Impact gun/wrench would be highly recommended. With the right tools it should be a mater of 1/2 an hour. Here is a link with a small write up and some pictures so you have a better idea of the installation: http://www.scionlife.com/forums/viewtopic.php?t=243432

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NST NonStopTuning Pulley Kits	NonStopTuning	NonStopTuning	19	11-08-2014 10:23 PM
NST (NonStopTuning) Pulleys. Info, Specs, User Data...	NonStopTuning	Performance Modifications	636	12-13-2013 09:47 PM
Drift Yaris + NST Pulleys = :)	thefoth	Performance Modifications	20	11-20-2008 09:03 PM
NST Pulleys	hatchbackkid82	Performance Modifications	15	09-29-2007 08:04 PM
NEW GROUP BUY: NST WP-Lite & ALT-Lite Pulley Kit (NonStopTuning)	NonStopTuning	NonStopTuning	266	09-29-2007 02:51 AM