Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > DIY / Maintenance / Service
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 12-19-2017, 06:14 PM   #19
xdarkxfirex
 
Drives: 2015 yaris le
Join Date: Feb 2015
Location: hamilton, on
Posts: 128
I notice its when I come to a steady stop sometimes when i feel it. I could be not being depressed enough to really engage noticeably.
xdarkxfirex is offline   Reply With Quote
Old 12-28-2017, 12:15 PM   #20
xdarkxfirex
 
Drives: 2015 yaris le
Join Date: Feb 2015
Location: hamilton, on
Posts: 128
Could it also be the rubber hoses? Where is a good place to buy a set of stainless ones?
xdarkxfirex is offline   Reply With Quote
Old 01-26-2018, 12:41 AM   #21
Exiwolfman
 
Exiwolfman's Avatar
 
Drives: 2007 Yaris
Join Date: Feb 2013
Location: Wasaga beach
Posts: 1,599
Adjust the rear drums and make sure the front slider pins are free , rear makes a huge difference in how the brakes feel on Yaris

Sent from my ONEPLUS A5010 using Tapatalk
Exiwolfman is offline   Reply With Quote
Old 01-27-2018, 09:27 AM   #22
xdarkxfirex
 
Drives: 2015 yaris le
Join Date: Feb 2015
Location: hamilton, on
Posts: 128
It does, but you have to adjust them regularly. I just did the other day. I ordered a set of new front brakes just to see if it will help the problem go away as well. I've pretty much narrowed it down to that now. Dont know if proportioning valves, or a booster can cause the same problem. I've heard mixed things. Sometimes you have to press twice to notice the brakes engage, it doesnt engage, or you press brakes feel warping then it sinks a little.
xdarkxfirex is offline   Reply With Quote
Old 01-27-2018, 09:37 AM   #23
IllusionX
It's the illusion you see
 
Drives: 07 Yaris Sedan Aero
Join Date: Oct 2006
Location: Brossard, QC
Posts: 3,721
I still don't understand. Are you pressing the brake pedal and it goes to the floor without slowing down at all? Like the first time you press the pedal after pushing the piston in for new pads?

Sent from my SM-G930W8 using Tapatalk
__________________
IllusionX is offline   Reply With Quote
Old 01-27-2018, 01:37 PM   #24
Exiwolfman
 
Exiwolfman's Avatar
 
Drives: 2007 Yaris
Join Date: Feb 2013
Location: Wasaga beach
Posts: 1,599
Quote:
Originally Posted by xdarkxfirex View Post
It does, but you have to adjust them regularly. I just did the other day. I ordered a set of new front brakes just to see if it will help the problem go away as well. I've pretty much narrowed it down to that now. Dont know if proportioning valves, or a booster can cause the same problem. I've heard mixed things. Sometimes you have to press twice to notice the brakes engage, it doesnt engage, or you press brakes feel warping then it sinks a little.
Are your slider pins moving and lubed are the front pistons moving etc ...think you are putting way to much though in to this , adjust rear and make sure all is moving upfront and you don't have a seized calipers .

Sent from my ONEPLUS A5010 using Tapatalk
Exiwolfman is offline   Reply With Quote
Old 01-28-2018, 01:24 AM   #25
xdarkxfirex
 
Drives: 2015 yaris le
Join Date: Feb 2015
Location: hamilton, on
Posts: 128
Yep, the sliders are lubed up pads uniformally wearing. the lower pins sometimes feel like the stick a little more, even though the bushings are fine and they are greased. Its not a sink to the floor issue, its just sometimes you dont feel the brakes engaging at all, but pedal still has pressure.
xdarkxfirex is offline   Reply With Quote
Old 01-28-2018, 01:36 AM   #26
Exiwolfman
 
Exiwolfman's Avatar
 
Drives: 2007 Yaris
Join Date: Feb 2013
Location: Wasaga beach
Posts: 1,599
Quote:
Originally Posted by xdarkxfirex View Post
Yep, the sliders are lubed up pads uniformally wearing. the lower pins sometimes feel like the stick a little more, even though the bushings are fine and they are greased. Its not a sink to the floor issue, its just sometimes you dont feel the brakes engaging at all, but pedal still has pressure.
Did the pistons push in when brakes taken apart ? The uneven brake pad is typical of Yaris the inside pads do wear out sooner .
You may have sticky caliper

Sent from my ONEPLUS A5010 using Tapatalk
Exiwolfman is offline   Reply With Quote
Old 01-28-2018, 10:00 AM   #27
xdarkxfirex
 
Drives: 2015 yaris le
Join Date: Feb 2015
Location: hamilton, on
Posts: 128
Yes, the pistons push back, and they arent seized. Thats why im kinda scratching my head.
xdarkxfirex is offline   Reply With Quote
Reply

Tags
air, bleeding, brakes, master cylinder, yaris

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
YARIS FAQ (frequently asked questions) PK198105 General Yaris / Vitz Discussion 97 10-20-2018 08:52 PM
Toyota Recalls auxmike General Yaris / Vitz Discussion 554 04-10-2018 03:10 PM
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW VitzBoy General Yaris / Vitz Discussion 5 09-05-2010 08:53 PM
2007 Yaris Pricing Info ! YarisBueller New YARIS Purchase Forum 104 06-24-2009 04:54 PM
Brake problem 1saneguy General Yaris / Vitz Discussion 15 11-24-2008 04:56 AM


All times are GMT -4. The time now is 06:06 AM.




YarisWorld
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.