|
08-06-2014, 08:18 AM | #1 |
Drives: 2003 Mach 1 Join Date: Oct 2008
Location: Georgia
Posts: 293
|
Looking for an aftermarket exhaust that isn't much louder than stock!
The stock muffler looks nasty and I hate the crappy little tail pipe. I daily drive the car and don't want to annoy the neighbors...
I came across the Tanabe Medallion Touring and it seems to be on the quieter side of aftermarket mufflers. The youtoube clips make it sound just a bit louder than stock but smoother. What else is out there that's comparable and isn't a full on can of angry bees? |
08-06-2014, 08:40 AM | #2 |
It's the illusion you see
Drives: 07 Yaris Sedan Aero Join Date: Oct 2006
Location: Brossard, QC
Posts: 3,888
|
Install a 4" muffler tip?
|
08-06-2014, 09:50 AM | #3 |
Drives: 2003 Mach 1 Join Date: Oct 2008
Location: Georgia
Posts: 293
|
^^^Want to ditch the rusty muffler too and am fine with a touch louder and smoother. So that's my criteria;)
|
08-06-2014, 10:00 AM | #4 |
それを吸ってください
|
I have a Blitz Nur Spec S. Quiet, smooth and throaty when laid into but not loud.
|
08-06-2014, 02:00 PM | #5 |
Dynamax super turbo muffler.
|
|
08-06-2014, 02:44 PM | #6 |
Drives: Toyota Premio NZT240 Join Date: Jul 2014
Location: Bangladesh
Posts: 23
|
How much louder are Magnaflow chambered mufflers over stock?
|
08-07-2014, 01:10 AM | #7 |
Drives: 08 hatchback Join Date: Jun 2011
Location: chicago
Posts: 85
|
rock auto axle back
|
08-07-2014, 01:22 AM | #8 |
play every day
Drives: 2012 Yaris L 2dr 5sp Join Date: Apr 2012
Location: Los Angeles
Posts: 1,961
|
At only $50, the price is right.
And you could always add a custom tip to it. Greg |
08-11-2014, 11:58 AM | #9 |
Drives: 2003 Mach 1 Join Date: Oct 2008
Location: Georgia
Posts: 293
|
Went with Fujitsubo Wagolis I was able to find used in excellent condition for a good price from a fellow forumite
|
08-12-2014, 01:48 PM | #10 |
Drives: 2007 Yaris Join Date: Aug 2014
Location: Winnipeg, canada
Posts: 59
|
what's that thing sound like? and how big is the pipe? when i told the wife i might mod my new car just so i would have some level of pride in the little turd here first concern ws to make sure i didn't make it louder lol
|
08-12-2014, 03:03 PM | #11 | |
It's the illusion you see
Drives: 07 Yaris Sedan Aero Join Date: Oct 2006
Location: Brossard, QC
Posts: 3,888
|
Quote:
LOL that one is spec'd the same as OEM. |
|
08-12-2014, 05:13 PM | #12 |
Drives: 2007 Yaris Join Date: Aug 2014
Location: Winnipeg, canada
Posts: 59
|
Ahh lol
|
08-13-2014, 01:39 AM | #13 |
Drives: 2003 Mach 1 Join Date: Oct 2008
Location: Georgia
Posts: 293
|
Anyone have any suggestions on muffler hangers? I know the exhaust I bought is very snug and can rub the stock oem bumper... I was thinking about swapping out the hangers with the ones micro image sells but wasn't sure on the spacing I needed to go with?
http://shop.microimageonline.com/Ure...H-urethane.htm What are the stock muffler hanger dimensions so I have a point of comparison? |
08-13-2014, 10:47 AM | #14 |
Drives: Decepticon - Ravage Join Date: Nov 2008
Location: San Francisco
Posts: 1,462
|
I measured a stock exhaust hanger for you. With no weight pulling on it, it measures 27mm from the center of two holes. And the holes measure just about 20mm.
__________________
Check out my Build thread: http://www.yarisworld.com/forums/showthread.php?t=52274 |
08-14-2014, 03:30 PM | #15 |
Drives: 2003 Mach 1 Join Date: Oct 2008
Location: Georgia
Posts: 293
|
Direct from Connecticut!
|
08-15-2014, 01:35 AM | #16 |
play every day
Drives: 2012 Yaris L 2dr 5sp Join Date: Apr 2012
Location: Los Angeles
Posts: 1,961
|
Oooo... nice.
It should be extra deep with that longer pipe looping around from the back of the muffler. Greg |
08-15-2014, 06:45 AM | #17 |
Obsessed with 1.5L
Drives: '10 PW Yaris Sedan Join Date: Feb 2011
Location: Westminster, MD
Posts: 907
|
You could bend that last hanger rod a smidge to drop the tip to clear the bumper
__________________
-Greg...the Exhaust Freak. -10 PW sedan 107whp/110wtq, full exhaust, suspension bits, TRD LSD -06 Highlander 3mzfe Limited AWD -82 Malibu, 1uzfe swap -97 Tercel coupe, 1nzfe/4.31 -96 Tercel coupe, Turbo 5efe, autoX -96 Tercel 4dr |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
stock scion xa exhaust and intake manifold and others | taman86 | Items for Sale by private party | 0 | 09-27-2012 02:39 PM |
Aftermarket Exhaust; More Power? | myt | Performance Modifications | 23 | 07-29-2007 03:18 PM |
A good aftermarket exhaust... | whooppee777 | Performance Modifications | 4 | 04-06-2007 02:12 PM |
What aftermarket exhaust will fit the Yaris Sedan? | dngz | Performance Modifications | 2 | 10-02-2006 01:41 PM |
can i / where to get factory switch for aftermarket fog lights? and exhaust tip q. | fantabulousbaby | Cosmetic Modifications (Exterior/Interior) | 22 | 08-29-2006 01:13 PM |