![]() |
![]()
![]() |
![]() |
#181 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Nice! I am glad to hear it is done and working.
__________________
![]() |
![]() |
![]() |
![]() |
#182 | |
![]() Drives: 2009 Hatchback Join Date: Aug 2013
Location: FL
Posts: 4
|
Quote:
Hi guys, First off, great forum, I have searched for a couple of days and found all the wires (even how to wire throught the firewall ![]() Surely this is a noob question, but I cannot get the parking lights to flash. My sp-101 manual depicts two (white) 12v flashing light outputs (7.5 amp x 2). I have tried: Connecting one white wire to pin 13, parking light (-), on the 13-pin plug by the headlight switch without success Connecting one white wire to pin 29 (green wire), parking light (+), on 30-pin plug 4A in the dash fuse box without success. I have tried alternating the two white wires in both positions as well. It might bear mentioning the the the 12v power input is connected to the gray wire, pin 5, on the 8 pin plug by the ignition swith. Which is supposed to be constant 12v. Thanks in advance |
|
![]() |
![]() |
![]() |
#183 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
Check the 10A TAIL and 7.5A PANEL2 fuses in the fuse panel that is under to bottom of the dash to see if you popped one of those fuses. If you connected to - output to pin 29 you would pop it.
__________________
![]() |
|
![]() |
![]() |
![]() |
#184 |
![]() Drives: 2009 Hatchback Join Date: Aug 2013
Location: FL
Posts: 4
|
The 10A tail is fine, there is no panel 2, only a 7.5A panel 1 beside the 10A tail, and it is fine.
This is what I have for the headlight switch connector ![]() Sorry I had to use a picture from another forum, best I could do in short notice. I tested the connection for continuity. The one thing I noticed is that the left front parking light (inside the headlight assembly) is burned out. Thanks |
![]() |
![]() |
![]() |
#185 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
If you do, then something is not configured correctly with the remote starter or the connection to that wire is not good.
__________________
![]() |
|
![]() |
![]() |
![]() |
#186 |
![]() Drives: 2009 Hatchback Join Date: Aug 2013
Location: FL
Posts: 4
|
Jumped the wires and the tail lights came on. Made sure the connection between the alarm and the white wire on the plug is fine. Reset defaults on the alarm as well, no luck.
I am out of ideas. Maybe just live without the lights flashing. |
![]() |
![]() |
![]() |
#187 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
It sounds like that output is bad on the remote starter.
__________________
![]() |
![]() |
![]() |
![]() |
#188 |
![]() Drives: 2009 Hatchback Join Date: Aug 2013
Location: FL
Posts: 4
|
Unfortunately I think you are correct. I've already got the alarm wired, maybe the guy I bought it from will give me just a new module, because I don't want to undo everything I have done.
Thanks again for your efforts CTScott ![]() |
![]() |
![]() |
![]() |
#189 |
![]() Drives: 2007 Yaris Join Date: Sep 2011
Location: Canada
Posts: 22
|
I am trying to install Avital 4003 so I can use the existing factory remote lock signal as a trigger on an 07 Yaris Sedan.
On connector GD1, there is a brown wire on pin #5, and there is also a brown wire on pin #7. Turns out that the brown wire on pin #7 is the negative (-)lock pulse. |
![]() |
![]() |
![]() |
#190 |
![]() Drives: 2007 Yaris Join Date: Sep 2011
Location: Canada
Posts: 22
|
I was wrong on post above. The negative pulse on connection above does not have enough juice to trip the remote starter signal.
Instead, I used the passenger unlock (+) pulse and inverted it with a relay to give the remote starter the (-) trigger signal it wants. This wire is located at connector 4H, the pink wire at pin #18. |
![]() |
![]() |
![]() |
#191 |
I've made a post!
Drives: 2007 yaris Join Date: Nov 2013
Location: maryland
Posts: 1
|
New to the forum but joined specifically because of this thread. I am thinking about installing a remote start on my girlfriends 2007 yaris with power locks but no factory keyless entry. Any suggestions for a simple, reliable yet relatively inexpensive remote start/keyless entry? I was looking at the VIPER 4105V, Are there any other systems you would suggest?
|
![]() |
![]() |
![]() |
#192 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
__________________
![]() |
|
![]() |
![]() |
![]() |
#193 |
![]() Drives: 2008 Yaris Join Date: May 2012
Location: St. Louis
Posts: 4
|
Hi Scott,
Thank you so much for this great page. I have a 2008 Yaris with power locks but no remote. I would really like to put a remote start and lock/unlock. I don't really need an alarm for it. I was looking at the suggested models in your document from a few years ago, and I have found most of them are discontinued. Can you suggest an updated model that would do remote start & lock/unlock that would work on my 2008 Yaris? Thanks! I really appreciate any helpful suggestions you may provide. |
![]() |
![]() |
![]() |
#194 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
http://www.ebay.com/itm/261152420077...84.m1423.l2649
__________________
![]() |
|
![]() |
![]() |
![]() |
#195 |
![]() Drives: 2008 Yaris Join Date: May 2012
Location: St. Louis
Posts: 4
|
Thanks so much!
I just ordered one. |
![]() |
![]() |
![]() |
#196 | |
![]() Drives: yaris 2006 Join Date: Nov 2013
Location: CA, Quebec
Posts: 5
|
Need to find my last wire, please help : door trigger input pin wire(wich monitors all the door)
Connector 4A ??? Wich pin ? Quote:
Tanks Last edited by racefear; 12-25-2013 at 10:49 AM. |
|
![]() |
![]() |
![]() |
#197 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
You could either use the pink wire for the dome, or connect a diode to each door wire with the white stripe on the diode pointing away from the wires and connect all of the white stripe ends together and to the door trigger input.
__________________
![]() |
|
![]() |
![]() |
![]() |
#198 |
![]() Drives: yaris 2006 Join Date: Nov 2013
Location: CA, Quebec
Posts: 5
|
ok tanks, for the pink dome wire, did you mean the pin 4 on the 4a connector ?
I don't have the best wirring diagram sheet... ![]() Tanks |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW | VitzBoy | General Yaris / Vitz Discussion | 7 | 09-20-2023 07:50 AM |
Northeast DIY Remote Start / Keyless Entry Workshop - Sunday, October 26 | CTScott | General Yaris / Vitz Discussion | 51 | 11-10-2012 01:32 PM |
2007 Yaris Pricing Info ! | YarisBueller | New YARIS Purchase Forum | 104 | 06-24-2009 04:54 PM |
yaris sedan remote trunk relase question pls help soon | fantabulousbaby | New YARIS Purchase Forum | 4 | 08-05-2006 01:26 AM |