|
10-28-2008, 10:38 PM | #1 |
diy factory aux location with aftermarked hu
these are for the people that have a aftermarket hu and want to retain the factory location aux this is so you dont have the mini to mini jack wire running down off the face of the hu or just want to add it if you dont have an i pod
things you would need rca male to female depending on location 1 to 6 foot aux input adapter for hu rca to female mini jack male mini to male mini jack drill bit depending on how big the female mini jack glue gun or glue stick and a torch ok first step plug aux input into hu next step find your stock location of the aux or where ever you want to put it. pop out the existing aux jack and chuck it haha. then take your drill bit. drill out the hole to the exact diameter of the aux then put the rca to female mini jack input in take your glue gun and surround it let it harden before you let go then all you have to do know is plug the rcas in run it back to the deck and then enjoy ill try post pics up as soon as possible to give you a visual look in to how to do it but the pics will come off a tc but its the same concept
__________________
08 junction produce belta almost done and ready for paint 06 junction produce tc 604 bhp 445tq ddriven still trying for 700+hp 90 crx sir ls vtec turbo 755 hp mecp masters certified |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY: Aux Input Jack Adapter | TinyGiant | DIY / Maintenance / Service | 11 | 11-10-2012 05:33 AM |
Factory armrest install DIY. | PetersRedYaris | DIY / Maintenance / Service | 16 | 07-27-2012 05:25 AM |
Factory AUX Jack | ojo | In Car Entertainment + Electronics (audio / video / alarm) | 1 | 06-06-2007 09:41 PM |
DIY: Painting Factory Brake Calipers | redyaris | DIY / Maintenance / Service | 38 | 05-26-2007 08:47 AM |
DIY: Changing Factory Door Handles and Lock Cover | redyaris | DIY / Maintenance / Service | 10 | 05-19-2007 05:55 PM |