C-one tower bar installed - Toyota Yaris Forums

jimcat · 03-01-2007, 07:55 AM

a C-one tower bar was brought from japan,
Its quite difficult for DIY install and I used for one hour
after installation, I found that the pole is not hard as i expected.
will be little bit curved when I push a hand on it
Anyway, it surely good looking at all.

jamal1984 · 03-01-2007, 11:11 PM

Quote:

Originally Posted by jimcat

a C-one tower bar was brought from japan,
Its quite difficult for DIY install and I used for one hour
after installation, I found that the pole is not hard as i expected.
will be little bit curved when I push a hand on it
Anyway, it surely good looking at all.

is installed this will help your car at anything at all? I mean i don't know why alot peoples install it. Thanks

jimcat · 03-01-2007, 11:27 PM

ha ha... i am not enough pro to say the different. i feel nothing changed. may be its a superstition to make driver confidence

aucorium · 03-02-2007, 11:12 AM

it is suppose to make the chassis more rigit and less movement between the struts , it should impove your handling especially through the corners

St_G · 03-02-2007, 12:47 PM

Our body rolls side to side like a motherfucker, but it doesn't really seem to flex all that much, even under spirited driving. At least not to me.

magoo_lc1 · 03-04-2007, 08:24 PM

One piece does not do miracles. Its like putting together a puzzle. Get the struts, tires, springs front and rear sways and then drive.

forpinks · 03-04-2007, 09:16 PM

that should be the last thing you put in that puzzle... install lowering springs with a 30% difference in stiffness first...

I think this should lower the vibration from the road a "tiny bit" more, as what I've observed from my 00 Kia in the Philippines although that has a go-kart coil-over welded to it, its custom fabricated by a 17yr old kid at the machine shop and powder coated in Skyline Blue at a "motorbike shop... LOL!

03-02-2007, 11:12 AM	#4
aucorium AKA Samurai Racer Drives: Yaris 2006 Join Date: Jul 2006 Location: South Africa Posts: 834	it is suppose to make the chassis more rigit and less movement between the struts , it should impove your handling especially through the corners __________________ JDMtuner Import Performance Tuning www.jdmtuner.co.za

03-04-2007, 08:24 PM	#6
magoo_lc1 Drives: honda civic hatch Join Date: Jan 2007 Location: missouri Posts: 144	One piece does not do miracles. Its like putting together a puzzle. Get the struts, tires, springs front and rear sways and then drive. __________________ 91 SE-R. R.I.P old freind The influence of peers on individual behavior illustrates the seductive power of conformity And, I don't mind at all being looked down upon by purists. Indeed I don't mind at all being looked down upon by those whom I do not look up to at

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tanabe Strut Tower Bar Install & Review [pics!]	Chris07LB	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	57	04-07-2022 07:46 AM
For Sale: Lexus GS Parts - L-Tuned Body Kit, TRD Strut Tower bar, 18"StaggeredWheels.	TRD_Yaris	Items for Sale by private party	6	05-06-2010 06:43 PM
Strut tower bar	tmyers82	Performance Modifications	24	02-06-2007 02:03 PM
C-ONE Front Strut Tower Bar - Installed & Impressions (Pics to Come)	bigsky2	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	20	01-10-2007 06:53 PM
c one motorsport performance bars	badhabitz	Performance Modifications	17	08-23-2006 10:31 PM

03-01-2007, 11:27 PM	#3
jimcat Green is good View User's Garage Drives: Vitz RS Join Date: Aug 2006 Location: Hong Kong Posts: 142	ha ha... i am not enough pro to say the different. i feel nothing changed. may be its a superstition to make driver confidence

03-02-2007, 12:47 PM	#5
St_G Drives: Black 2007 Yaris Liftback 1.5 Join Date: Jan 2007 Location: Memphis, TN USA Posts: 252	Our body rolls side to side like a motherfucker, but it doesn't really seem to flex all that much, even under spirited driving. At least not to me.

03-04-2007, 09:16 PM	#7
forpinks Drives: 03 Toyota Corolla S modded, Join Date: Jan 2007 Location: LAS VEGAS, NV Posts: 221	that should be the last thing you put in that puzzle... install lowering springs with a 30% difference in stiffness first... I think this should lower the vibration from the road a "*tiny bit*" more, as what I've observed from my 00 Kia in the Philippines although that has a go-kart coil-over welded to it, its custom fabricated by a 17yr old kid at the machine shop and powder coated in Skyline Blue at a "motorbike shop... LOL!